mini-arrow-fuselage.scad

   1 infty = 300;
   2 eps = 0.01;
   3
   4 fuse_w = 60;
   5 fuse_h = 33;
   6
   7 fuse_l = 132;
   8
   9 wall = 2;
  10
  11 rod_d = 3;
  12 rod_l = 10.5;
  13
  14 // center rod
  15 center_rod_h = fuse_h - 21;
  16 center_rod_x = 78;
  17
  18 rod_support_w = rod_d + 2*wall;
  19 rod_support_l = rod_l + wall;
  20 rod_support_h_add = rod_d;
  21
  22 // front rod
  23 front_rod_x = 121.5;
  24 front_rod_h = fuse_h - 19;
  25 front_rod_angle = 35; // from the Y axis
  26
  27 // cable_hole
  28 cable_hole_x = 100;
  29 cable_hole_w = 25;
  30 cable_hole_h = 10;
  31
  32 // corner radius
  33 corner_r = 10;
  34 corner_l = fuse_l - 21;
  35 corner_x = fuse_l - corner_l;
  36
  37 // top window
  38 top_window_x = corner_x + 3;
  39 top_window_l = center_rod_x - 8 - top_window_x;
  40 top_window_w = fuse_w - 4*wall;
  41
  42 module body_cube() {
  43         translate([0, -fuse_w/2, 0])
  44                 cube([fuse_l, fuse_w, fuse_h]);
  45 }
  46
  47 module body() {
  48         // main U-shape
  49         difference() {
  50                 body_cube();
  51                 translate([-eps, -fuse_w/2+wall, wall])
  52                         cube([corner_x + 2*eps, fuse_w - 2*wall, fuse_h]);
  53                 // round corners
  54                 hull() {
  55                         translate([corner_x-eps, -fuse_w/2+wall, wall+corner_r])
  56                                 cube([corner_l+2*eps, fuse_w - 2*wall, fuse_h]);
  57                         for (y = [-1, 1]) scale([1, y, 1])
  58                         translate([corner_x-eps, fuse_w/2-wall-corner_r, wall+corner_r])
  59                                 rotate([0, 90, 0]) cylinder(r = corner_r, h = corner_l+2*eps);
  60                 }
  61         };
  62
  63
  64         // support for center rod
  65         for (y = [-1, 1]) scale([1, y, 1]) {
  66                 translate([center_rod_x-rod_support_w/2, fuse_w/2-rod_support_l, 0])
  67                         cube([rod_support_w, rod_support_l, center_rod_h+rod_support_h_add]);
  68                 translate([center_rod_x-rod_support_w/2, fuse_w/2-2*wall, 0])
  69                         cube([rod_support_w, wall + eps, fuse_h]);
  70         }
  71         // support for front rod
  72         for (y = [-1, 1]) scale([1, y, 1]) {
  73                 intersection () {
  74                         body_cube();
  75                         translate([front_rod_x, fuse_w/2, 0])
  76                                 rotate([0, 0, front_rod_angle]) {
  77                                 translate([-rod_support_w/2, -rod_support_l, 0])
  78                                         cube([rod_support_w + 3*wall, 2*rod_support_l, front_rod_h+rod_support_h_add]);
  79                                 translate([-rod_support_w/2, -3*wall, 0])
  80                                         cube([rod_support_w, 6*wall*tan(front_rod_angle), fuse_h]);
  81                         }
  82                 }
  83         }
  84 }
  85
  86 difference() {
  87         body();
  88         // holes for center rods
  89         for (y = [-1, 1]) scale([1, y, 1])
  90         translate([center_rod_x-rod_d/2, fuse_w/2-10, center_rod_h-rod_d/2])
  91                 cube([rod_d, rod_l + eps, fuse_h]);
  92         // holes for front rods
  93         for (y = [-1, 1]) scale([1, y, 1])
  94         translate([front_rod_x, fuse_w/2, front_rod_h-rod_d/2])
  95         rotate([0, 0, front_rod_angle])
  96         translate([-rod_d/2, -rod_l, 0])
  97                 cube([rod_d, 2*rod_l, fuse_h]);
  98         // holes for servo cables
  99         translate([cable_hole_x, -fuse_w/2-eps, fuse_h])
 100                 rotate([-90, 0, 0])
 101                 scale([1, 2*cable_hole_h/cable_hole_w, 1])
 102                 cylinder(r = cable_hole_w/2, h = fuse_w+2*eps);
 103         // top window
 104         translate([top_window_x, -top_window_w/2, -eps])
 105                 cube([top_window_l, top_window_w, fuse_h]);
 106 }