www.fi.muni.cz Git - bike-lights.git/search

]> www.fi.muni.cz Git - bike-lights.git/search

https://www.fi.muni.cz/~kas/git / bike-lights.git / search

2013-02-28	Jan "Yenya" Kasprzak	control.c: handle "battery critical" state	commit \| commitdiff \| tree
2013-02-28	Jan "Yenya" Kasprzak	control.c: display battery status on status led by...	commit \| commitdiff \| tree
2013-02-28	Jan "Yenya" Kasprzak	pattern.c: num_pattern(10) is also allowed	commit \| commitdiff \| tree
2013-02-28	Jan "Yenya" Kasprzak	battery.c: rework	commit \| commitdiff \| tree
2013-02-27	Jan "Yenya" Kasprzak	adc.c: more measurements of ambient light	commit \| commitdiff \| tree
2013-02-27	Jan "Yenya" Kasprzak	ambient.c: zone adjustments	commit \| commitdiff \| tree
2013-02-27	Jan "Yenya" Kasprzak	battery.c: priority of operations	commit \| commitdiff \| tree
2013-02-27	Jan "Yenya" Kasprzak	Revert "adc.c: make the ADC handlers non-atomic"	commit \| commitdiff \| tree
2013-02-20	Jan "Yenya" Kasprzak	pattern: laser diodes as gpio 4	commit \| commitdiff \| tree
2013-02-20	Jan "Yenya" Kasprzak	pwmled.c: shut down the boost converter later	commit \| commitdiff \| tree
2013-01-18	Jan "Yenya" Kasprzak	pins.txt: converter response times	commit \| commitdiff \| tree
2013-01-18	Jan "Yenya" Kasprzak	ambient.c: zones adjusted for photoresistor	commit \| commitdiff \| tree
2013-01-18	Jan "Yenya" Kasprzak	Merge branch 'master' of ssh://anxur.fi.muni.cz/~kas...	commit \| commitdiff \| tree
2013-01-04	Jan "Yenya" Kasprzak	adc.c: make the ADC handlers non-atomic	commit \| commitdiff \| tree
2013-01-04	Jan "Yenya" Kasprzak	adc.c: routine for synchronous conversion	commit \| commitdiff \| tree
2012-12-16	Jan "Yenya" Kasprzak	control.c: blinking modes update	commit \| commitdiff \| tree
2012-12-16	Jan "Yenya" Kasprzak	control.c: on_patterns should not last forever	commit \| commitdiff \| tree
2012-12-16	Jan "Yenya" Kasprzak	ambient light: make three measurements	commit \| commitdiff \| tree
2012-12-16	Jan "Yenya" Kasprzak	pwmled.c: do not regulate just after mode change	commit \| commitdiff \| tree
2012-12-16	Jan "Yenya" Kasprzak	pwmled.c: disable the disconnected step-up earlier	commit \| commitdiff \| tree
2012-12-16	Jan "Yenya" Kasprzak	pattern.c: off_pattern should not last forever	commit \| commitdiff \| tree
2012-12-15	Jan "Yenya" Kasprzak	buttons.c: longer keypress	commit \| commitdiff \| tree
2012-12-15	Jan "Yenya" Kasprzak	ambient.c: ambient light hysteresis	commit \| commitdiff \| tree
2012-12-15	Jan "Yenya" Kasprzak	schematics: more low-pass filters, fuse removed	commit \| commitdiff \| tree
2012-12-12	Jan "Yenya" Kasprzak	Merge branch 'master' of ssh://anxur.fi.muni.cz/~kas...	commit \| commitdiff \| tree
2012-12-11	Jan "Yenya" Kasprzak	schematics: bug fixes	commit \| commitdiff \| tree
2012-12-10	Jan "Yenya" Kasprzak	pwm.c: maximum TOP value of T/C 1 is 0x3FF.	commit \| commitdiff \| tree
2012-12-08	Jan "Yenya" Kasprzak	buttons.c - the correct IRQ is PCIE1	commit \| commitdiff \| tree
2012-12-08	Jan "Yenya" Kasprzak	Ability to quickly build testing firmware	commit \| commitdiff \| tree
2012-12-08	Jan "Yenya" Kasprzak	ADC measurements in mA	commit \| commitdiff \| tree
2012-12-07	Jan "Yenya" Kasprzak	pwm.c: publish only PWM_MAX as non-internal value	commit \| commitdiff \| tree
2012-12-07	Jan "Yenya" Kasprzak	pwmled.c: factored out probing to a separate function	commit \| commitdiff \| tree
2012-12-07	Jan "Yenya" Kasprzak	pwmled.c: save error sum between mode switches	commit \| commitdiff \| tree
2012-12-06	Jan "Yenya" Kasprzak	pwm.c: make it usable from non-atomic blocks	commit \| commitdiff \| tree
2012-12-06	Jan "Yenya" Kasprzak	pwm.c - remove unused code	commit \| commitdiff \| tree
2012-12-06	Jan "Yenya" Kasprzak	pwm.c: PLL clock enabling code	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	firmware: control logic moved to a separate module	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	adc: always-running ADC	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	logging: consistent init function naming	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	patterns: consistent init function naming	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	ambient light: consistent init function naming	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	gpio: consistent init function naming	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	pwmled: consistent init function naming	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	gpio: rework	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	buttons, wakeup rework	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	pwmled.c: rework	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	make timer faster, sub-1 LSB PWM values need it	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	pattern.c: call pwmled.c unconditionally	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	pattern.c: mode1_pattern out of modes 1 and 2 instead...	commit \| commitdiff \| tree
2012-11-30	Jan "Yenya" Kasprzak	adc: measure gain stage offset _slowly_	commit \| commitdiff \| tree
2012-11-29	Jan "Yenya" Kasprzak	pwm.c: typo fixes	commit \| commitdiff \| tree
2012-11-29	Jan "Yenya" Kasprzak	firmware: emulate higher resolution of PWM	commit \| commitdiff \| tree
2012-11-29	Jan "Yenya" Kasprzak	adc.c: keep ADC enabled	commit \| commitdiff \| tree
2012-11-22	Jan "Yenya" Kasprzak	pwmled: more logging	commit \| commitdiff \| tree
2012-11-22	Jan "Yenya" Kasprzak	pwmled: remove old unused function	commit \| commitdiff \| tree
2012-11-22	Jan "Yenya" Kasprzak	ambient: new zones	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	buttons.c: param setup fixes	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	patterns: zero pattern	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	pwmled: regulation using sum of differences	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	adc: log missed timer interrupts	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	pattern.c: remove unused function	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	patterns: use mode1_pattern for all PWM LEDs for now	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	buttons.c: fix for setup timeout	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	lights.h: PWM_MAX for better measurements	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	adc: measure the offset of the gain-20 stage	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	adc: only 4 measurements for single-ended pwm	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	buttons: init state when suspended during user params...	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	main.c: disable also the analog comparator	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	adc: average several measurements	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	firmware: button/status LEDs	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	patterns: PATTERN_FOREVER	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	firmware: buttons-press and pwrdown rework	commit \| commitdiff \| tree
2012-11-21	Jan "Yenya" Kasprzak	firmware/buttons.c: preliminary user params setup	commit \| commitdiff \| tree
2012-11-17	Jan "Yenya" Kasprzak	pwmled.c: use mA-based values instead of PWM value...	commit \| commitdiff \| tree
2012-11-17	Jan "Yenya" Kasprzak	pins.txt: current ranges for 0.033 Ohm sensing resistor	commit \| commitdiff \| tree
2012-11-17	Jan "Yenya" Kasprzak	firmware/battery: init function, new resistor sizes	commit \| commitdiff \| tree
2012-11-17	Jan "Yenya" Kasprzak	firmware: move PWM_MAX to lights.h	commit \| commitdiff \| tree
2012-11-17	Jan "Yenya" Kasprzak	adc.c: MUX for LED 3 is on its final position	commit \| commitdiff \| tree
2012-11-14	Jan "Yenya" Kasprzak	pattern.c: make patterns accessible from other modules	commit \| commitdiff \| tree
2012-11-12	Jan "Yenya" Kasprzak	pattern.c: start numeric pattern with pause	commit \| commitdiff \| tree
2012-11-12	Jan "Yenya" Kasprzak	Makefile: schematics file printing	commit \| commitdiff \| tree
2012-11-12	Jan "Yenya" Kasprzak	schematics: .gitignore web images	commit \| commitdiff \| tree
2012-11-12	Jan "Yenya" Kasprzak	battery voltage sensor	commit \| commitdiff \| tree
2012-11-11	Jan "Yenya" Kasprzak	num_pattern: longer delay	commit \| commitdiff \| tree
2012-11-11	Jan "Yenya" Kasprzak	Ambient light values for 300K/1M5 resistors	commit \| commitdiff \| tree
2012-11-11	Jan "Yenya" Kasprzak	firmware: move buttons and GPIO LEDs	commit \| commitdiff \| tree
2012-10-30	Jan "Yenya" Kasprzak	schematics/.gitignore	commit \| commitdiff \| tree
2012-10-30	Jan "Yenya" Kasprzak	Makefile: make gerber, make fab	commit \| commitdiff \| tree
2012-10-29	Jan "Yenya" Kasprzak	ITEAD studio order number	commit \| commitdiff \| tree
2012-10-29	Jan "Yenya" Kasprzak	pcb: design rule check fixes	commit \| commitdiff \| tree
2012-10-29	Jan "Yenya" Kasprzak	Makefile for creating the web pages	commit \| commitdiff \| tree
2012-10-29	Jan "Yenya" Kasprzak	schematics: display the name of the MCP14628 chips	commit \| commitdiff \| tree
2012-10-29	Jan "Yenya" Kasprzak	pcb: name of the layout	commit \| commitdiff \| tree
2012-10-28	Jan "Yenya" Kasprzak	pcb: more optimizations	commit \| commitdiff \| tree
2012-10-28	Jan "Yenya" Kasprzak	pcb: via clearance enhanced, pin sizes fixed	commit \| commitdiff \| tree
2012-10-28	Jan "Yenya" Kasprzak	PCB mounting holes	commit \| commitdiff \| tree
2012-10-26	Jan "Yenya" Kasprzak	connectors renamed, component orientation labeled	commit \| commitdiff \| tree
2012-10-26	Jan "Yenya" Kasprzak	PCB: first fully routed version	commit \| commitdiff \| tree
2012-10-26	Jan "Yenya" Kasprzak	USBASP pinout fixed	commit \| commitdiff \| tree
2012-10-26	Jan "Yenya" Kasprzak	schematics: more routing of PCB	commit \| commitdiff \| tree
next

Bike Lights: see http://www.fi.muni.cz/~kas/bike-lights/

RSS Atom