pwm.c: channels running - visible from the outside

[bike-lights.git] / firmware / adc.c

diff --git a/firmware/adc.c b/firmware/adc.c
index 02af6b380724ae6f92ccca9407d1e1951a75c53f..c6b113d4932cb538768fb8f94674d53af34a2483 100644 (file)
--- a/firmware/adc.c
+++ b/firmware/adc.c
@@ -3,11 +3,12 @@
 
 #include "lights.h"
 
-#define AMBIENT_ADC N_PWMLEDS
-#define BATTERY_ADC (N_PWMLEDS + 1)
-#define ADC1_GAIN20 (N_PWMLEDS + 2)
-#define BUTTON_ADC  (N_PWMLEDS + 3)
-#define ZERO_ADC    (N_PWMLEDS + 4)
+// pwmleds are measured continuously (when active)
+#define AMBIENT_ADC N_PWMLEDS          // measured every jiffy (16 Hz)
+#define BUTTON_ADC  (N_PWMLEDS + 1)    // measured every jiffy (16 Hz)
+#define BATTERY_ADC (N_PWMLEDS + 2)    // once per second
+#define ADC1_GAIN20 (N_PWMLEDS + 3)    // once per second
+#define ZERO_ADC    (N_PWMLEDS + 4)    // must be last
 
 #define NUM_ADCS       ZERO_ADC
 
@@ -19,13 +20,13 @@ struct {
        { 0, 1, PWMLED_ADC_SHIFT },     // pwmled 1
        { 0, 1, PWMLED_ADC_SHIFT },     // pwmled 2
        { 0, 1, PWMLED_ADC_SHIFT },     // pwmled 3
-       { 0, 1, 3 },                    // ambient
+       { 0, 1, AMBIENT_ADC_SHIFT },    // ambient
+       { 0, 1, 0 },                    // buttons
        { 0, 1, 0 },                    // battery
        { 0, 1, 0 },                    // gain20
-       { 0, 1, 0 },                    // buttons
 };
 
-volatile static unsigned char current_adc;
+volatile static unsigned char current_adc, current_slow_adc;
 static uint16_t adc_sum, zero_count, drop_count, read_count, n_reads_log;
 #define ADC1_GAIN20_OFFSET_SHIFT       6
 static uint16_t adc1_gain20_offset;
@@ -47,16 +48,16 @@ static void setup_mux(unsigned char n)
        case AMBIENT_ADC: // ambient light: 1.1V, ADC5 (PA6), single-ended
                ADMUX = _BV(REFS1) | _BV(MUX2) | _BV(MUX0);
                break;
+       case BUTTON_ADC: // buttons: 1.1V, ADC3, single-ended
+               PORTA |= _BV(PA3); // +5V to the voltage splitter
+               ADMUX = _BV(REFS1) | _BV(MUX1) | _BV(MUX0);
+               break;
        case BATTERY_ADC: // batt voltage: 1.1V, ADC6 (PA7), single-ended
                ADMUX = _BV(REFS1) | _BV(MUX2) | _BV(MUX1);
                break;
        case ADC1_GAIN20: // gain stage offset: 1.1V, ADC1,1, gain 20
                ADMUX = _BV(REFS1) | _BV(MUX3) | _BV(MUX2) | _BV(MUX0);
                break;
-       case BUTTON_ADC: // buttons: 1.1V, ADC3, single-ended
-               PORTA |= _BV(PA3); // +5V to the voltage splitter
-               ADMUX = _BV(REFS1) | _BV(MUX1) | _BV(MUX0);
-               break;
        case ZERO_ADC: // zero: 1.1V, ADC1 (PA1), single-ended
                ADMUX = _BV(REFS1) | _BV(MUX0);
                break;
@@ -65,11 +66,25 @@ static void setup_mux(unsigned char n)
 
 static void start_next_adc()
 {
-       if (current_adc > 0)
+       if (current_adc == 0) {
+               if (current_slow_adc > N_PWMLEDS) {
+                       // read one of the non-PWMLED ADCs
+                       current_adc = --current_slow_adc;
+               } else {
+                       // no more non-PWMLEDs to do, start with PWMLEDs
+                       current_adc = N_PWMLEDS-1;
+               }
+       } else if (current_adc >= N_PWMLEDS) {
+               // one of the non-PWMLED ADCs just finished, skip to PWMLEDs.
+               current_adc = N_PWMLEDS-1;
+       } else {
+               // next PWMLED
                current_adc--;
-       else
-               // TODO: kick the watchdog here.
-               current_adc = NUM_ADCS-1;
+       }
+
+#if 0
+       log_byte(0x90 + current_adc); // debug ADC switching
+#endif
 
        adc_sum = 0;
        // we use the last iteration of zero_count to set up the MUX
@@ -96,6 +111,16 @@ static void start_next_adc()
        ADCSRA |= _BV(ADSC);
 }
 
+void timer_start_slow_adcs()
+{
+       if (current_slow_adc > N_PWMLEDS) { // Don't start if in progress
+               log_byte(0x80 + current_slow_adc);
+       } else {
+               current_slow_adc = NUM_ADCS;
+               // TODO: kick the watchdog here
+       }
+}
+
 /*
  * Single synchronous ADC conversion.
  * Has to be called with IRQs disabled (or with the ADC IRQ disabled).
@@ -119,7 +144,8 @@ static uint16_t read_adc_sync()
 void init_adc()
 {
        unsigned char i;
-       current_adc = NUM_ADCS;
+       current_slow_adc = NUM_ADCS;
+       current_adc = 0;
 
        ADCSRA = _BV(ADEN)                      // enable
                | _BV(ADPS1) | _BV(ADPS0)       // CLK/8 = 125 kHz
@@ -215,12 +241,12 @@ ISR(ADC_vect) { // IRQ handler
        case AMBIENT_ADC:
                ambient_adc(adc_sum);
                break;
-       case BATTERY_ADC:
-               battery_adc(adc_sum);
-               break;
        case BUTTON_ADC:
                button_adc(adc_sum);
                break;
+       case BATTERY_ADC:
+               battery_adc(adc_sum);
+               break;
        case ADC1_GAIN20:
                adc1_gain20_adc(adcval);
                break;