drzak na hlinikove pasky v koupelne

diff --git a/lampa-koupelna.scad b/lampa-koupelna.scad
new file mode 100644 (file)
index 0000000..e2d7b66
--- /dev/null
+++ b/lampa-koupelna.scad
@@ -0,0 +1,98 @@
+include <yenyalib.scad>
+
+sirka 17.8
+vyska 9.5
+
+body_w = 15;
+base_w = 30;
+step1_h = 50;
+step1_w = 20;
+step1_off = 40;
+
+step2_h = 25;
+step2_w = 15;
+step2_off = 40;
+
+step23_plus = 7;
+
+step3_h = -step2_h;
+step3_w = 10;
+step3_off = 40;
+
+clip_wall = 1.5;
+alu_w = 24 + 0.5;
+alu_h = 8;
+clip_end = 1;
+
+module clip() {
+       difference() {
+               cube([alu_w + 2*clip_wall, alu_h + clip_wall, body_w]);
+               translate([clip_wall, clip_wall, -eps])
+                       cube([alu_w, alu_h + eps, body_w + 2*eps]);
+       }
+       translate([clip_wall, alu_h + clip_wall - clip_end, 0])
+               cylinder(r = clip_end, h = body_w, $fn = 4);
+       translate([clip_wall + alu_w, alu_h + clip_wall - clip_end, 0])
+               cylinder(r = clip_end, h = body_w, $fn = 4);
+}
+       
+module body() {
+       // cube to prevent rounded bottom
+       Ty(-10) cube([base_w, 10, body_w]);
+       // step 1
+       hull () {
+               cube([base_w, eps, body_w]);
+               translate([step1_off, step1_h, 0])
+                       cube([step1_w, eps, body_w]);
+       }
+
+       // step 2
+       translate([step1_off, step1_h, 0]) hull() {
+               cube([step1_w, eps, body_w]);
+               translate([step2_off, step2_h, 0])
+                       cube([step2_w, eps, body_w]);
+       }
+
+       // under the top corner
+       translate([step1_off + step2_off, step1_h + step2_h - step23_plus, 0])
+               cube([step2_w, step23_plus, body_w]);
+       // step 3
+       translate([step1_off + step2_off, step1_h + step2_h, 0]) hull() {
+               cube([step2_w, eps, body_w]);
+               translate([step3_off, step3_h, 0])
+                       cube([step3_w, eps, body_w]);
+       }
+}
+
+screw_d1 = 3.5;
+screw_wall = 3;
+screw_d2 = 9;
+screw_off = 10;
+
+difference() {
+       round_with() {
+               union() {
+                       Mz() cylinder(r1 = 1, r2 = 0, h = 2);
+               }
+               body();
+       }
+       // cut bottom
+       translate([-infty/2, -infty, -infty/2]) cube(infty);
+       translate([screw_off, -eps, body_w/2])
+               Rx(-90) 
+               cylinder(r = screw_d1/2, h = screw_wall + 2*eps, $fn = 6);
+       translate([screw_off, screw_wall, body_w/2])
+               Rx(-90) 
+               cylinder(r = screw_d2/2, h = step1_h, $fn = 6);
+}
+
+       // upper clip
+       translate([step1_off + step2_off + step2_w/2-alu_w/2-clip_wall,
+               step1_h + step2_h - clip_wall, 0])
+               clip();
+
+       // lower clip
+       translate([step1_off+step2_off+step3_off+step3_w/2-alu_w/2-clip_wall,
+               step1_h + step2_h + step3_h + clip_wall, 0])
+               Sy(-1) clip();
+