firmware/main.c

   1 #include <avr/io.h>
   2 #include <util/delay.h>
   3 #include <avr/sleep.h>
   4 #include <avr/interrupt.h>
   5 #include <avr/power.h>
   6 #include <avr/wdt.h>
   7
   8 #include "lights.h"
   9
  10 static void hw_setup()
  11 {
  12         init_battery();
  13         init_pwm();
  14         init_adc();
  15         init_tmr();
  16         init_buttons();
  17
  18         init_pwmled();
  19         init_gpio();
  20         init_ambient();
  21         init_pattern();
  22         init_control();
  23
  24         set_sleep_mode(SLEEP_MODE_IDLE);
  25 }
  26
  27 static void hw_suspend()
  28 {
  29         susp_pwm();
  30         susp_adc();
  31         susp_tmr();
  32         susp_gpio();
  33         susp_ambient();
  34         susp_buttons();
  35 }
  36
  37 void power_down(unsigned char err)
  38 {
  39         hw_suspend();
  40
  41         do {
  42                 if (err)
  43                         gpio_set(0, 1);
  44
  45                 // G'night
  46                 set_sleep_mode(SLEEP_MODE_PWR_DOWN);
  47                 sleep_enable();
  48                 sleep_bod_disable();
  49                 sei();
  50                 sleep_cpu();
  51
  52                 // G'morning
  53                 cli();
  54                 sleep_disable();
  55
  56                 // allow wakeup by long button-press only
  57         } while (!buttons_wait_for_release());
  58
  59         // ok, so I will wake up
  60         hw_setup();
  61 }
  62
  63 int main(void)
  64 {
  65         unsigned char mcusr_save;
  66
  67         // disable the WDT if running
  68         wdt_reset();
  69         mcusr_save = MCUSR;
  70         MCUSR = 0;
  71         wdt_disable();
  72
  73         if (mcusr_save & _BV(WDRF)) // was watchdog reset?
  74                 gpio_set(0, 1);
  75
  76         init_log(mcusr_save);
  77
  78         power_usi_disable(); // Once for lifetime
  79         ACSRA |= _BV(ACD);   // disable analog comparator
  80
  81         log_set_state(3);
  82
  83         hw_setup();
  84         power_down(mcusr_save & _BV(WDRF));
  85
  86         sei();
  87 #if 1
  88         while (1) {
  89                 cli();
  90                 if (TIMER1_IS_ON()) {
  91                         set_sleep_mode(SLEEP_MODE_IDLE);
  92                 } else if (adc_is_on) {
  93                         set_sleep_mode(SLEEP_MODE_ADC);
  94                 } else {
  95                         set_sleep_mode(SLEEP_MODE_PWR_DOWN);
  96                 }
  97
  98                 sleep_enable();
  99                 // keep BOD active, no sleep_bod_disable();
 100                 sei();
 101                 sleep_cpu();
 102                 sleep_disable();
 103         }
 104 #endif
 105
 106 #if 0
 107         DDRB |= _BV(PB2);
 108         while (1) {
 109                 PORTB |=  _BV( PB2 );
 110                 _delay_ms(200);
 111                 PORTB &=~ _BV( PB2 );
 112                 _delay_ms(200);
 113         }
 114 #endif
 115 }