From fe4ed82008966def79a01d20a2109512e32c8b65 Mon Sep 17 00:00:00 2001
From: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
Date: Wed, 19 Jun 2019 17:42:46 +0200
Subject: [PATCH] kaze fuselage holder

---
 kaze-fuselage-holder.scad | 71 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 kaze-fuselage-holder.scad

diff --git a/kaze-fuselage-holder.scad b/kaze-fuselage-holder.scad
new file mode 100644
index 0000000..c7bcd7f
--- /dev/null
+++ b/kaze-fuselage-holder.scad
@@ -0,0 +1,71 @@
+eps = 0.01;
+infty = 200;
+
+tube_d = 8.0 + 0.5;
+tube_slot = 6;
+wall = 1.2;
+
+fuse_w = 45;
+fuse_h = 40;
+
+body_h = 15;
+side_w = 8;
+corner_d = 10;
+
+thin_wall = 0.6;
+supp_xoff = 0.75 * side_w;
+supp_zoff = 0.75 * body_h;
+
+module body() {
+	// base_plate
+	translate([-fuse_w/2, -fuse_h/2, 0])
+		cube([fuse_w, fuse_h, thin_wall]);
+
+	// fuse tube
+	translate([0, fuse_h/2-tube_d/2-wall, 0])
+		cylinder(r = tube_d/2+wall, h = body_h);
+
+	// side walls
+	for (x = [-1, 1]) scale([x, 1, 1])
+	translate([fuse_w/2-thin_wall, -fuse_h/2, 0])
+		cube([thin_wall, fuse_h, body_h]);
+	for (y = [-1, 1]) scale([1, y, 1])
+	translate([-fuse_w/2, fuse_h/2-thin_wall, 0])
+		cube([fuse_w, thin_wall, body_h]);
+
+	// side wall supports
+	for (x = [-1, 1]) scale([x, 1, 1])
+	hull() {
+		translate([fuse_w/2-supp_xoff, -fuse_h/2, 0])
+			cube([thin_wall, fuse_h, thin_wall]);
+		translate([fuse_w/2-thin_wall, -fuse_h/2, supp_zoff])
+			cube([thin_wall, fuse_h, thin_wall]);
+	}
+	for (y = [-1, 1]) scale([1, y, 1])
+	hull() {
+		translate([-fuse_w/2, fuse_h/2-supp_xoff, 0])
+			cube([fuse_w, thin_wall, thin_wall]);
+		translate([-fuse_w/2, fuse_h/2-thin_wall, supp_zoff])
+			cube([fuse_w, thin_wall, thin_wall]);
+	}
+}
+
+difference() {
+	body();
+	// hole in base plate
+	hull() {
+		for (x = [-1, 1])
+		for (y = [-1, 1])
+		scale([x, y, 1])
+		translate([-fuse_w/2+side_w+corner_d/2,
+			-fuse_h/2+side_w+corner_d/2, -eps])
+			cylinder(r = corner_d/2, h = thin_wall + 2*eps);
+	}
+	// fuse tube
+	translate([0, fuse_h/2-tube_d/2-wall, -eps])
+		cylinder(r = tube_d/2, h = body_h + 2*eps);
+	// fuse tube slot
+	translate([-tube_slot/2, 0, -eps])
+		cube([tube_slot, fuse_h/2-tube_d/2-wall, body_h +2*eps]);
+}
+
-- 
2.43.0