From acc8678d30d0ea7ec87641c144dacb81b60daab6 Mon Sep 17 00:00:00 2001
From: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
Date: Wed, 10 Apr 2019 16:03:50 +0200
Subject: [PATCH] another printed versions

---
 servo-tube-holder-half-side.scad | 15 ++++++++++-----
 wing-tube-clip-front.scad        |  4 ++--
 wing-tube-joint.scad             |  1 -
 3 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/servo-tube-holder-half-side.scad b/servo-tube-holder-half-side.scad
index f309500..bbf44d3 100644
--- a/servo-tube-holder-half-side.scad
+++ b/servo-tube-holder-half-side.scad
@@ -1,7 +1,7 @@
 eps = 0.01;
 infty = 200;
 
-wall = 1.0;
+wall = 1.5;
 
 tube_d = 8.0 + 0.2;
 
@@ -11,10 +11,11 @@ clip_w = servo_side_l + wall;
 slot_w = 3;
 
 servo_w = 12.5+0.5;
-servo_zoff = 16 + 2.0-tube_d/2-servo_w/2; // od stredu trubice po osu otaceni
+servo_zoff = 20 + 2.0-tube_d/2-servo_w/2; // od stredu trubice po osu otaceni
 servo_slot_z = 2.5 + 0.1;
 servo_xoff = -servo_slot_z/2;
-servo_screw_hole = 1.2;
+servo_screw_hole = 1.6;
+servo_screw_hole_2 = 2.5;
 
 module main() {
 difference() {
@@ -38,11 +39,15 @@ difference() {
 	translate([servo_xoff, servo_zoff, wall])
 		cube([servo_slot_z, servo_w + eps, servo_side_l + eps]);
 
-	// servo screw hole
-	translate([-infty/2, servo_zoff + servo_w/2, 0.6*servo_side_l + wall])
+	// servo screw hole 1
+	translate([0, servo_zoff + servo_w/2, 0.6*servo_side_l + wall])
 	rotate([0, 90, 0])
 		cylinder(r = servo_screw_hole/2, h = infty, $fn = 6);
 
+	translate([0, servo_zoff + servo_w/2, 0.6*servo_side_l + wall])
+	rotate([0, -90, 0])
+		cylinder(r = servo_screw_hole_2/2, h = infty, $fn = 6);
+
 }
 }
 
diff --git a/wing-tube-clip-front.scad b/wing-tube-clip-front.scad
index 4367e74..2ee1c6c 100644
--- a/wing-tube-clip-front.scad
+++ b/wing-tube-clip-front.scad
@@ -5,7 +5,7 @@ wall = 1.5;
 
 tube_d = 8.0 + 0.5;
 tube2_d = 6.0 + 0.5;
-tube2_xoff = tube_d/2 + tube2_d/2 + 2.8 + 2;
+tube2_xoff = tube_d/2 + tube2_d/2 + 9;
 
 clip_w = tube2_d + 2*wall;
 
@@ -13,7 +13,7 @@ slot_w = 3;
 slot_angle = 180;
 
 wing_slot = 0.75*tube2_d;
-wing_top_wall = 2.5;
+wing_top_wall = 3;
 
 difference() {
 	hull() {
diff --git a/wing-tube-joint.scad b/wing-tube-joint.scad
index 95ceef3..3ef7885 100644
--- a/wing-tube-joint.scad
+++ b/wing-tube-joint.scad
@@ -8,7 +8,6 @@ tube_d = 8.0 + 0.2;
 base_w = 65;
 base_l = 30;
 
-tube_d = 6 + 0.1;
 tube_zoff = 3;
 
 base_w = 65;
-- 
2.43.0