Directory layout

[openparking.git] / board / Makefile

diff --git a/Makefile b/board/Makefile
similarity index 51%
rename from Makefile
rename to board/Makefile
index 23528a0821dd8cd349a3ebd319e2e9e77b12cb23..076d26cdb436e01ca63551a87b40361579b0c3e4 100644 (file)
--- a/Makefile
+++ b/board/Makefile
@@ -1,25 +1,3 @@
-
-PROGRAM=firmware
-SRC=firmware.c rs485.c
-OBJ=$(SRC:.c=.o)
-
-
-MCU=atmega328p
-# AVRDUDE_MCU=$(MCU)
-AVRDUDE_MCU=atmega328p
-AVRDUDE_PROGRAMMER=arduino
-
-CFLAGS=-Wall -Os -mmcu=$(MCU) -DUSE_LOGGING=1 -DF_CPU=16000000UL -std=gnu99
-LDFLAGS=
-AVRDUDE_FLAGS= -p$(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER) -P /dev/ttyUSB0 -b 57600
-
-FORMAT=ihex
-
-CC=avr-gcc
-OBJCOPY=avr-objcopy
-OBJDUMP=avr-objdump
-AVRDUDE=avrdude
-
 WEB_DIR=/home/kas/html/board/
 WEB_FILES=pcb-back.png pcb-front.png schematics.png handlebar.png
 GERBER_FILES=\
@@ -32,14 +10,13 @@ GERBER_FILES=\
        board.outline.gbr \
        board.plated-drill.cnc
 
-all: $(PROGRAM).hex $(PROGRAM).eep
+all:
+       @echo "Usage: make [clean|web|gerber|fab|board.pcb]"
 
 clean:
        rm -f board.cmd board.jpg board.net board.new.pcb board.pcb- \
                board.png board.ps board.sch~ pcb-back.png pcb-front.png \
-               schematics.png *.gbr *.cnc \
-               $(PROGRAM).hex $(PROGRAM).eep $(PROGRAM).elf *.o *.s \
-               eeprom.raw version.c
+               schematics.png *.gbr *.cnc
 
 web: $(WEB_FILES)
        test -d $(WEB_DIR) && install -m 644 $(WEB_FILES) $(WEB_DIR)
@@ -84,49 +61,3 @@ fab: $(GERBER_FILES)
                echo "You may also want to do git tag gerber-fab-$$D" '
 
 .PHONY: gerber
-
-program: $(PROGRAM).hex $(PROGRAM).eep
-       $(AVRDUDE) $(AVRDUDE_FLAGS) -U flash:w:$(PROGRAM).hex:i -U eeprom:w:$(PROGRAM).eep:i
-
-program_flash: $(PROGRAM).hex
-       $(AVRDUDE) $(AVRDUDE_FLAGS) -U flash:w:$(PROGRAM).hex:i
-
-program_eeprom: $(PROGRAM).eep
-       $(AVRDUDE) $(AVRDUDE_FLAGS) eeprom:w:$(PROGRAM).eep:i
-
-dump_eeprom:
-       $(AVRDUDE) $(AVRDUDE_FLAGS) -U eeprom:r:eeprom.raw:r
-       od -tx1 eeprom.raw
-
-objdump: $(PROGRAM).elf
-       $(OBJDUMP) --disassemble $<
-
-.PRECIOUS : $(OBJ) $(PROGRAM).elf
-
-%.hex: %.elf
-       $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-%.eep: %.elf
-       $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-               --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
-
-%.elf: $(OBJ)
-       $(CC) $(CFLAGS) $(OBJ) -o $@ $(LDFLAGS)
-
-%.o: %.c lights.h Makefile
-       $(CC) -c $(CFLAGS) $< -o $@
-
-%.s: %.c lights.h Makefile
-       $(CC) -S -c $(CFLAGS) $< -o $@
-
-%.o: %.S
-       $(CC) -c $(CFLAGS) $< -o $@
-
-clean:
-
-version.c:
-       ./version.pl > version.c
-
-.PHONY: all clean dump_eeprom program program_flash program_eeprom objdump \
-       version.c
-