X-Git-Url: https://www.fi.muni.cz/~kas/git//home/kas/public_html/git/?p=heater.git;a=blobdiff_plain;f=firmware%2Fmain.c;h=a6cc1a8366350e69b728ace665e976479805a1ed;hp=0aa1c4abdfb3be3c77dece344f54abc84d24083b;hb=cba1b50d5359b6b983c179b6ff6a59aee39d5706;hpb=eb6bb04d1cccfdbb7a09fdfa670aaac1ba218ef5

diff --git a/firmware/main.c b/firmware/main.c
index 0aa1c4a..a6cc1a8 100644
--- a/firmware/main.c
+++ b/firmware/main.c
@@ -21,21 +21,15 @@
  * Buttons:
  * There are two buttons (+ and -). Any button can wake the system up from
  * the power-down state.
- * TODO: When the system is woken up by the "-" button,
- * it starts with the minimum output power, when it is woken up by the "+"
- * button, it start with the maximum output power.
  * When running, the "-" button is used for decreasing the output power,
  * the "+" button is for increasing it.
- * When on the lowest power state, the "-" button switches the system off.
- * Long "-" button press switches the system off, long "+" button
- * press sets the output power to maximum.
+ * Any long button press switches the system off.
  *
  * Status LED:
  * When powering up by a button press, the LED goes on to provide a visual
  * feedback, and is switched off after the button is released.
- * After a button press, the # of blinks of the LED reflects the
- * chosen output power level for some time. Afterwards, it displays
- * the battery level.
+ * It displays the current power level and current battery voltage
+ * using # of blinks with different blinking lengths.
  * When the battery is completely exhausted, the output power is switched
  * off, the LED keeps blinking for some time, and then the whole system is
  * switched off to avoid deep discharge of the battery.
@@ -59,6 +53,16 @@
 #define WAKEUP_POLL 50	// msec
 #define WAKEUP_LIMIT 5	// times WAKEUP_POLL
 
+// #define BUTTONS_REVERSE
+
+#ifdef BUTTONS_REVERSE
+#	define BUTTON1	PB0
+#	define BUTTON2	PB1
+#else
+#	define BUTTON1	PB1
+#	define BUTTON2	PB0
+#endif /* !BUTTONS_REVERSE */
+
 /* which state (output on or output off) are we measuring now */
 static volatile unsigned char adc_type, adc_drop;
 #define ADC_RUNAVG_SHIFT 5	// running average shift on batt_on, batt_off
@@ -107,9 +111,7 @@ static unsigned char power_levels[] = {
 #define N_POWER_LEVELS	(sizeof(power_levels) / sizeof(power_levels[0]))
 
 static unsigned char power_level = 0; // selected power level
-static unsigned char power_level_changed; // for visual feedback
 
-#define LED_PWRCHANGE_COUNT	5
 #define LED_BATTEMPTY_COUNT	60
 
 /* timing by WDT */
@@ -267,9 +269,9 @@ static void buttons_susp()
 static unsigned char buttons_pressed()
 {
 	return (
-		(PINB & _BV(PB0) ? 0 : 1)
+		(PINB & _BV(BUTTON1) ? 0 : 1)
 		|
-		(PINB & _BV(PB1) ? 0 : 2)
+		(PINB & _BV(BUTTON2) ? 0 : 2)
 	);
 }
 
@@ -379,10 +381,18 @@ static unsigned char battery_level()
 static void status_led_next_pattern()
 {
 	static unsigned char battery_exhausted;
+	static unsigned char display_power_level;
 
-	if (power_level_changed) {
-		power_level_changed--;
+	if (display_power_level) {
 		n_blinks = power_level + 1;
+		if (batt_on >> 8 == batt_off >> 8) { // load unplugged
+			n_blinks = 2 * n_blinks;
+			blink_on_time = 0;
+			blink_off_time = 0;
+		} else {
+			blink_on_time = 2;
+			blink_off_time = 2;
+		}
 	} else {
 		unsigned char b_level = battery_level();
 		if (b_level) {
@@ -395,11 +405,12 @@ static void status_led_next_pattern()
 		}
 
 		n_blinks = b_level + 1;
+		blink_on_time = 4;
+		blink_off_time = 0;
 	}
 
-	blink_on_time = 2;
-	blink_off_time = 1;
-	blink_counter = 10;
+	blink_counter = 12;
+	display_power_level = !display_power_level;
 }
 
 static void timer_blink()
@@ -422,23 +433,13 @@ static void timer_blink()
 static void button_pressed(unsigned char button, unsigned char long_press)
 {
 	// ignore simlultaneous button 1 and 2 press
-	// Note: we set power_level_changed after each button press,
-	// even when the power is at maximum, to provide visual feedback
-	// with status LED.
 	if (long_press) {
-		if (button == 1) {
-			power_down();
-			return;
-		} else if (button == 2) {
-			power_level = N_POWER_LEVELS-1;
-		}
+		power_down();
+		return;
 	} else { // short press
 		if (button == 1) {
 			if (power_level > 0) {
 				--power_level;
-			} else {
-				power_down();
-				return;
 			}
 		} else if (button == 2) {
 			if (power_level < N_POWER_LEVELS-1) {
@@ -446,7 +447,6 @@ static void button_pressed(unsigned char button, unsigned char long_press)
 			}
 		}
 	}
-	power_level_changed = LED_PWRCHANGE_COUNT;
 	status_led_next_pattern();
 }
 
@@ -563,6 +563,10 @@ int main()
 				log_byte(batt_on >> 8);
 #endif
 			}
+			if (jiffies == 0) {
+				log_byte(batt_on >> 8);
+				log_byte(batt_off >> 8);
+			}
 			log_flush();
 		}
 	}