#include "lights.h"
#define WAKEUP_LIMIT 5 // times 100 ms
+#define SHORT_PRESS_MIN 2 // in jiffies (16 Hz ticks)
+#define SHORT_PRESS_MAX 5
+#define LONG_PRESS_MIN 10
+#define SETUP_TIMEOUT 255 // 15 seconds in jiffies
+// #define USER_PARAMS_WRAPPING 1
+
static uint16_t button_start[3];
union {
unsigned char all;
unsigned char btn1 : 1;
unsigned char btn2 : 1;
unsigned char brake : 1;
+ unsigned char brake_working : 1;
+ unsigned char brake_reported : 1;
};
} button_state, prev_state;
-static unsigned char user_params[MAX_USER_PARAMS] = { 0, 0, 0 };
-static unsigned char user_params_max[MAX_USER_PARAMS] = { 3, 2, 2 };
+/*
+ * How does the user_params setup mode work:
+ *
+ * There is an array of user-settable parameters user_params[N_USER_PARAMS],
+ * each of which has its own maximum value (user_params_max[N_USER_PARAMS].
+ * These parameters can be modified in the following way:
+ *
+ * Long press of button 1 enters the setup mode.
+ * In the setup mode, status and illumination LEDs both blink in inversion
+ * number mode.
+ * The # of blinks of the illumination LED shows which user_param is
+ * being modified now,
+ * and the # of blinks of the status LED shows the value of this particular
+ * user_param.
+ *
+ * Long press of button 1 selects the next user_param,
+ * short press of button 0 decrements this particular user_param value,
+ * short press of button 1 increments this particular user_param value.
+ *
+ * If USER_PARAMS_WRAPPING is #defined, decrementing the zero leads to
+ * the maximum value - 1, and incrementing the maximum value - 1 leads
+ * to zero.
+ *
+ * After the SETUP_TIMEOUT with no button press, the system leaves the setup
+ * mode.
+ */
+static unsigned char user_params[N_USER_PARAMS] = { 0, 0, 0 };
+static unsigned char user_params_max[N_USER_PARAMS] = {
+ N_AMBIENT_ZONES+1, 2, 2
+};
static unsigned char user_params_state = 0;
/*
* Here 0 means "no setup currently in progress",
- * 1 .. MAX_USER_PARAMS means "now short presses increase or decrease
+ * 1 .. N_USER_PARAMS means "now short presses increase or decrease
* the value of user_params[user_params_state-1]"
*/
-static uint16_t user_params_starttime;
+static unsigned char user_params_timeout;
static void inline set_status_led(unsigned char n, pattern_t *pattern)
{
- led_set_pattern(n + N_PWMLEDS, pattern);
+ led_set_pattern(n + 1, pattern);
}
unsigned char buttons_setup_in_progress()
{
- if (user_params_state // setup in progress ...
- // or at least one button is pressed:
- || prev_state.btn1
- || prev_state.btn2)
+ if (user_params_state) // setup in progress ...
return 1;
return 0;
}
-pattern_t *buttons_setup_status0_pattern_select()
+pattern_t *buttons_setup_status1_pattern_select()
{
if (user_params_state) // Setup in progress
return number_pattern(user_params_state, 1);
return NULL;
}
-pattern_t *buttons_setup_status1_pattern_select()
+pattern_t *buttons_setup_status0_pattern_select()
{
if (user_params_state) // Setup in progress
return number_pattern(
unsigned char get_user_param(unsigned char param)
{
- if (param < MAX_USER_PARAMS)
+ if (param < N_USER_PARAMS)
return user_params[param];
return 0; // FIXME: internal error?
}
if (button == 0) {
if (user_params[param])
- user_params[param]--;
+ --user_params[param];
+#if SETUP_VALUES_WRAPPING
else
user_params[param] = user_params_max[param]-1;
+#endif
} else {
- user_params[param]++;
+ ++user_params[param];
if (user_params[param] >= user_params_max[param])
+#if SETUP_VALUES_WRAPPING
user_params[param] = 0;
+#else
+ user_params[param] = user_params_max[param]-1;
+#endif
}
// FIXME: notify somebody about user_params change?
set_status_led(1, buttons_setup_status1_pattern_select());
- user_params_starttime = jiffies;
+ user_params_timeout = SETUP_TIMEOUT;
}
static inline void long_press(unsigned char button)
{
if (button == 0) {
- power_down();
+ power_down(0);
return;
}
// button 1 - cycle through states
user_params_state++;
- if (user_params_state > MAX_USER_PARAMS)
+ if (user_params_state > N_USER_PARAMS)
user_params_state = 1;
set_status_led(0, buttons_setup_status0_pattern_select());
set_status_led(1, buttons_setup_status1_pattern_select());
- user_params_starttime = jiffies;
+ user_params_timeout = SETUP_TIMEOUT;
}
void init_buttons()
{
if (cur && !prev) { // --- just pressed ---
button_start[button] = jiffies;
- set_status_led(button, NULL);
+ if (!user_params_state)
+ set_status_led(button, NULL);
} else if (cur && prev) { // --- is still pressed ---
uint16_t duration = jiffies - button_start[button];
- if (duration > 160) {
- set_status_led(button, on1_pattern);
+ if (duration >= LONG_PRESS_MIN) {
+ set_status_led(button, on_pattern);
// acknowledge long press
}
} else if (!cur && prev) { // --- just released ---
uint16_t duration = jiffies - button_start[button];
- if (duration > 6 && duration < 60) {
+ if (duration >= SHORT_PRESS_MIN && duration < SHORT_PRESS_MAX) {
short_press(button);
- } else if (duration > 160) {
+ } else if (duration > LONG_PRESS_MIN) {
set_status_led(button, NULL);
long_press(button);
}
static void handle_brake(unsigned char cur, unsigned char prev)
{
+ uint16_t duration;
+
if (cur && !prev) { // --- just pressed ---
button_start[2] = jiffies;
- } else if (cur && prev) { // --- is still pressed ---
- uint16_t duration = jiffies - button_start[2];
+ return;
+ } else if (!cur && prev) { // --- just released ---
+ button_start[2] = jiffies;
+ return;
+ }
+ // --- no change ---
+ duration = jiffies - button_start[2];
- if (duration > 6) {
- brake_on();
- button_start[2] = jiffies - 7; // avoid overflow
+ if (duration == 0) // at least two jiffies
+ return;
+
+ if (cur) {
+ if (button_state.brake_working) {
+ static unsigned int brake_time;
+ if (button_state.brake_reported) {
+ if (brake_time) {
+ brake_time--;
+ } else {
+ brake_off();
+ button_state.brake_working = 0;
+ button_state.brake_reported = 0;
+ }
+ } else {
+ button_state.brake_reported = 1;
+ brake_on();
+ brake_time = 255; // avoid longer than ~16s
+ }
+ }
+ } else {
+ button_state.brake_working = 1;
+ if (button_state.brake_reported) {
+ button_state.brake_reported = 0;
+ brake_off();
}
- } else if (!cur && prev) { // --- just released ---
- brake_off();
}
+
+ button_start[2] = jiffies - 7; // avoid overflow
}
void timer_check_buttons()
{
handle_button(0, button_state.btn1, prev_state.btn1);
- handle_button(1, button_state.btn2, prev_state.btn2);
- handle_brake(button_state.brake, prev_state.brake);
- prev_state.all = button_state.all;
+ // when button 1 is on, all other states are unreadable
+ if (button_state.btn1) {
+ prev_state.btn1 = button_state.btn1;
+ } else {
+ handle_button(1, button_state.btn2, prev_state.btn2);
+ handle_brake(button_state.brake, prev_state.brake);
+ prev_state.all = button_state.all;
+ }
+
+ if (user_params_timeout)
+ --user_params_timeout;
- if (user_params_state && jiffies - user_params_starttime > 1000) {
+ if (user_params_state && !user_params_timeout) {
user_params_state = 0;
set_status_led(0, buttons_setup_status0_pattern_select());
set_status_led(1, buttons_setup_status1_pattern_select());
PORTA &= ~_BV(PA3); // disable +5V to the hall probe
// adc.c will re-enable it again
- button_state.all = 0;
+ button_state.btn1 = 0;
+ button_state.btn2 = 0;
+ button_state.brake = 0;
+
if (adcval == 0x3FF) {
button_state.brake = 1;
} else if (adcval > 0x240) {
https://www.fi.muni.cz/~kas/git / bike-lights.git / blobdiff