X-Git-Url: https://www.fi.muni.cz/~kas/git//home/kas/public_html/git/?a=blobdiff_plain;f=kaze-fuselage-holder.scad;h=bf3cb9ab09c4c8f1b1ceade611e1797842c5d647;hb=HEAD;hp=c7bcd7f43a8944160c1d44797806adf06c79ff80;hpb=fe4ed82008966def79a01d20a2109512e32c8b65;p=things.git

diff --git a/kaze-fuselage-holder.scad b/kaze-fuselage-holder.scad
index c7bcd7f..bf3cb9a 100644
--- a/kaze-fuselage-holder.scad
+++ b/kaze-fuselage-holder.scad
@@ -2,21 +2,16 @@ eps = 0.01;
 infty = 200;
 
 tube_d = 8.0 + 0.5;
-tube_slot = 6;
+tube_slot = 6.5;
 wall = 1.2;
 
-fuse_w = 45;
-fuse_h = 40;
-
-body_h = 15;
-side_w = 8;
+side_w = 7;
 corner_d = 10;
 
 thin_wall = 0.6;
-supp_xoff = 0.75 * side_w;
-supp_zoff = 0.75 * body_h;
+supp_xoff = 0.85 * side_w;
 
-module body() {
+module body(fuse_w, fuse_h, body_h) {
 	// base_plate
 	translate([-fuse_w/2, -fuse_h/2, 0])
 		cube([fuse_w, fuse_h, thin_wall]);
@@ -34,6 +29,7 @@ module body() {
 		cube([fuse_w, thin_wall, body_h]);
 
 	// side wall supports
+	supp_zoff = body_h-thin_wall;
 	for (x = [-1, 1]) scale([x, 1, 1])
 	hull() {
 		translate([fuse_w/2-supp_xoff, -fuse_h/2, 0])
@@ -50,22 +46,27 @@ module body() {
 	}
 }
 
-difference() {
-	body();
-	// hole in base plate
-	hull() {
-		for (x = [-1, 1])
-		for (y = [-1, 1])
-		scale([x, y, 1])
-		translate([-fuse_w/2+side_w+corner_d/2,
-			-fuse_h/2+side_w+corner_d/2, -eps])
-			cylinder(r = corner_d/2, h = thin_wall + 2*eps);
+module main(fuse_w, fuse_h, body_h) {
+	difference() {
+		body(fuse_w, fuse_h, body_h);
+		// hole in base plate
+		hull() {
+			for (x = [-1, 1])
+			for (y = [-1, 1])
+			scale([x, y, 1])
+			translate([-fuse_w/2+side_w+corner_d/2,
+				-fuse_h/2+side_w+corner_d/2, -eps])
+				cylinder(r = corner_d/2, h = thin_wall + 2*eps);
+		}
+		// fuse tube
+		translate([0, fuse_h/2-tube_d/2-wall, -eps])
+			cylinder(r = tube_d/2, h = body_h + 2*eps);
+		// fuse tube slot
+		translate([-tube_slot/2, 0, -eps])
+			cube([tube_slot, fuse_h/2-tube_d/2-wall, body_h +2*eps]);
 	}
-	// fuse tube
-	translate([0, fuse_h/2-tube_d/2-wall, -eps])
-		cylinder(r = tube_d/2, h = body_h + 2*eps);
-	// fuse tube slot
-	translate([-tube_slot/2, 0, -eps])
-		cube([tube_slot, fuse_h/2-tube_d/2-wall, body_h +2*eps]);
 }
 
+main(42, 37, 12);
+
+translate([45, 0, 0]) main(30, 25, 8);