# Abel Cheung <maddog@linuxhall.org>, 2005
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2005
# Woodman Tuen <wmtuen@gmail.com>, 2006-07
-# Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>, 2008
-#
-#
+# Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>, 2008, 2010.
msgid ""
msgstr ""
-"Project-Id-Version: evince 2.23.92\n"
+"Project-Id-Version: evince 2.31.5\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2008-09-18 10:44+0800\n"
-"PO-Revision-Date: 2008-08-20 10:41+0800\n"
-"Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n"
-"Language-Team: Chinese (Taiwan) <community@linuxhall.org>\n"
+"POT-Creation-Date: 2010-07-14 19:54+0800\n"
+"PO-Revision-Date: 2010-07-13 22:30+0800\n"
+"Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n"
+"Language-Team: Chinese (traditional)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
+"Language: zh_TW\n"
"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Virtaal 0.5.1\n"
-#: ../backend/comics/comics-document.c:169
+#: ../backend/comics/comics-document.c:217
#, c-format
-msgid "File corrupted."
-msgstr "檔案已損毀。"
+msgid ""
+"Error launching the command “%s” in order to decompress the comic book: %s"
+msgstr "執行指令「%s」以將漫畫書解壓縮時發生錯誤：%s"
+
+#: ../backend/comics/comics-document.c:231
+#, c-format
+msgid "The command “%s” failed at decompressing the comic book."
+msgstr "將漫畫書解壓縮時指令「%s」失敗。"
+
+#: ../backend/comics/comics-document.c:240
+#, c-format
+msgid "The command “%s” did not end normally."
+msgstr "指令「%s」沒有正常的結束。"
+
+#: ../backend/comics/comics-document.c:420
+#, c-format
+msgid "Not a comic book MIME type: %s"
+msgstr "並非漫畫書 MIME 類型：%s"
+
+#: ../backend/comics/comics-document.c:427
+msgid "Can't find an appropriate command to decompress this type of comic book"
+msgstr "找不到合適的指令可將這個類型的漫畫書解壓縮"
+
+#: ../backend/comics/comics-document.c:465
+#: ../libdocument/ev-document-factory.c:143
+#: ../libdocument/ev-document-factory.c:286
+msgid "Unknown MIME Type"
+msgstr "未知的 MIME 型態"
+
+#: ../backend/comics/comics-document.c:492
+msgid "File corrupted"
+msgstr "檔案已損毀"
+
+#: ../backend/comics/comics-document.c:505
+msgid "No files in archive"
+msgstr "壓縮檔中沒有檔案"
-#: ../backend/comics/comics-document.c:203
+#: ../backend/comics/comics-document.c:544
#, c-format
msgid "No images found in archive %s"
msgstr "在文件 %s 中找不到圖片"
+#: ../backend/comics/comics-document.c:788
+#, c-format
+msgid "There was an error deleting “%s”."
+msgstr "刪除「%s」時發生錯誤。"
+
+#: ../backend/comics/comics-document.c:927
+#, c-format
+msgid "Error %s"
+msgstr "錯誤 %s"
+
#: ../backend/comics/comicsdocument.evince-backend.in.h:1
msgid "Comic Books"
msgstr "漫畫書"
-#: ../backend/djvu/djvu-document.c:247
-#, c-format
+#: ../backend/djvu/djvu-document.c:173
+msgid "DjVu document has incorrect format"
+msgstr "DjVu 文件有不正確的格式"
+
+#: ../backend/djvu/djvu-document.c:250
msgid ""
-"The document is composed by several files. One or more of such files cannot "
+"The document is composed of several files. One or more of these files cannot "
"be accessed."
-msgstr "æ\96\87件ç\94±å¤\9aå\80\8bæª\94æ¡\88çµ\84æ\88\90ï¼\8c其中一個或更多的檔案無法存取。"
+msgstr "æ¤æ\96\87件ç\94±å¤\9aå\80\8bæª\94æ¡\88çµ\84æ\88\90ã\80\82其中一個或更多的檔案無法存取。"
#: ../backend/djvu/djvudocument.evince-backend.in.h:1
-msgid "Djvu Documents"
-msgstr "Djvu 文件"
+msgid "DjVu Documents"
+msgstr "DjVu 文件"
-#: ../backend/dvi/dvi-document.c:94
-#, c-format
-msgid "File not available"
-msgstr "檔案不存在"
-
-#: ../backend/dvi/dvi-document.c:109
-#, c-format
+#: ../backend/dvi/dvi-document.c:113
msgid "DVI document has incorrect format"
msgstr "DVI 文件有不正確的格式"
msgid "DVI Documents"
msgstr "DVI 文件"
+#: ../backend/pdf/ev-poppler.cc:521
+msgid "This work is in the Public Domain"
+msgstr "這個作品是屬於公有領域"
+
#. translators: this is the document security state
-#: ../backend/pdf/ev-poppler.cc:688
+#: ../backend/pdf/ev-poppler.cc:774
msgid "Yes"
msgstr "是"
#. translators: this is the document security state
-#: ../backend/pdf/ev-poppler.cc:691
+#: ../backend/pdf/ev-poppler.cc:777
msgid "No"
msgstr "否"
-#: ../backend/pdf/ev-poppler.cc:765
+#: ../backend/pdf/ev-poppler.cc:905
msgid "Type 1"
msgstr "Type 1"
-#: ../backend/pdf/ev-poppler.cc:767
+#: ../backend/pdf/ev-poppler.cc:907
msgid "Type 1C"
msgstr "Type 1C"
-#: ../backend/pdf/ev-poppler.cc:769
+#: ../backend/pdf/ev-poppler.cc:909
msgid "Type 3"
msgstr "Type 3"
-#: ../backend/pdf/ev-poppler.cc:771
+#: ../backend/pdf/ev-poppler.cc:911
msgid "TrueType"
msgstr "TrueType"
-#: ../backend/pdf/ev-poppler.cc:773
+#: ../backend/pdf/ev-poppler.cc:913
msgid "Type 1 (CID)"
msgstr "Type 1 (CID)"
-#: ../backend/pdf/ev-poppler.cc:775
+#: ../backend/pdf/ev-poppler.cc:915
msgid "Type 1C (CID)"
msgstr "Type 1C (CID)"
-#: ../backend/pdf/ev-poppler.cc:777
+#: ../backend/pdf/ev-poppler.cc:917
msgid "TrueType (CID)"
msgstr "TrueType (CID)"
-#: ../backend/pdf/ev-poppler.cc:779
+#: ../backend/pdf/ev-poppler.cc:919
msgid "Unknown font type"
msgstr "字型不明"
-#: ../backend/pdf/ev-poppler.cc:805
+#: ../backend/pdf/ev-poppler.cc:945
msgid "No name"
msgstr "沒有名稱"
-#: ../backend/pdf/ev-poppler.cc:813
+#: ../backend/pdf/ev-poppler.cc:953
msgid "Embedded subset"
msgstr "嵌入字體"
-#: ../backend/pdf/ev-poppler.cc:815
+#: ../backend/pdf/ev-poppler.cc:955
msgid "Embedded"
-msgstr "åµ\8cå\85¥"
+msgstr "å\85§åµ\8cç\9a\84"
-#: ../backend/pdf/ev-poppler.cc:817
+#: ../backend/pdf/ev-poppler.cc:957
msgid "Not embedded"
msgstr "沒有嵌入"
msgid "PDF Documents"
msgstr "PDF 文件"
-#: ../backend/impress/impress-document.c:297
-#, c-format
-msgid "Remote files aren't supported"
-msgstr "不支援遠端檔案"
-
-#: ../backend/impress/impress-document.c:308
-#, c-format
+#: ../backend/impress/impress-document.c:302
+#: ../backend/tiff/tiff-document.c:113
msgid "Invalid document"
msgstr "無效的文件"
msgstr "沒有足夠的記憶體"
#: ../backend/impress/zip.c:59
-msgid "Cannot find zip signature"
-msgstr "無法找到 zip 簽章"
+msgid "Cannot find ZIP signature"
+msgstr "找不到 ZIP 簽章"
#: ../backend/impress/zip.c:62
-msgid "Invalid zip file"
-msgstr "無效的 zip 檔"
+msgid "Invalid ZIP file"
+msgstr "無效的 ZIP 檔"
#: ../backend/impress/zip.c:65
-msgid "Multi file zips are not supported"
-msgstr "不支援分割式 zip 檔"
+msgid "Multi file ZIPs are not supported"
+msgstr "不支援分割式 ZIP 檔"
#: ../backend/impress/zip.c:68
msgid "Cannot open the file"
msgstr "無法從檔案讀取資訊"
#: ../backend/impress/zip.c:74
-msgid "Cannot find file in the zip archive"
-msgstr "無法在 zip 檔中找到檔案"
+msgid "Cannot find file in the ZIP archive"
+msgstr "無法在 ZIP 壓縮檔中找到檔案"
#: ../backend/impress/zip.c:77
msgid "Unknown error"
msgstr "不明的錯誤"
-#: ../backend/ps/ev-spectre.c:113
+#: ../backend/ps/ev-spectre.c:102
#, c-format
msgid "Failed to load document “%s”"
msgstr "載入文件“%s”失敗"
-#: ../backend/ps/ev-spectre.c:146
+#: ../backend/ps/ev-spectre.c:135
#, c-format
msgid "Failed to save document “%s”"
msgstr "儲存文件“%s”失敗"
msgid "Couldn't save attachment “%s”: %s"
msgstr "無法儲存附件“%s”：%s"
-#: ../libdocument/ev-attachment.c:373
+#: ../libdocument/ev-attachment.c:372
#, c-format
msgid "Couldn't open attachment “%s”: %s"
msgstr "無法開啟附件“%s”：%s"
-#: ../libdocument/ev-attachment.c:408
+#: ../libdocument/ev-attachment.c:407
#, c-format
msgid "Couldn't open attachment “%s”"
msgstr "無法開啟附件“%s”"
-#: ../libdocument/ev-document-factory.c:181
-#: ../libdocument/ev-document-factory.c:302
-#, c-format
-msgid "Unknown MIME Type"
-msgstr "未知的 MIME 型態"
-
-#: ../libdocument/ev-document-factory.c:201
+#: ../libdocument/ev-document-factory.c:168
#, c-format
msgid "File type %s (%s) is not supported"
msgstr "檔案類型 %s (%s) 不支援"
-#: ../libdocument/ev-document-factory.c:357
+#: ../libdocument/ev-document-factory.c:359
msgid "All Documents"
msgstr "所有文件"
-#: ../libdocument/ev-document-factory.c:389
+#: ../libdocument/ev-document-factory.c:391
msgid "All Files"
msgstr "所有檔案"
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:439
-msgid "Co_nnect"
-msgstr "連線(_N)"
-
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:483
-msgid "Connect _anonymously"
-msgstr "匿名連線(_A)"
-
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:492
-msgid "Connect as u_ser:"
-msgstr "以此使用者連線(_S):"
-
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:529
-msgid "_Username:"
-msgstr "使用者名稱(_U):"
-
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:533
-msgid "_Domain:"
-msgstr "網域(_D):"
-
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:538
-#: ../data/evince-password.glade.h:4
-msgid "_Password:"
-msgstr "密碼(_P)："
-
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:553
-msgid "_Forget password immediately"
-msgstr "立刻忘掉密碼(_F) "
-
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:561
-msgid "_Remember password until you logout"
-msgstr "在您登出前記住密碼(_R)"
+#: ../libdocument/ev-file-helpers.c:146
+#, c-format
+msgid "Failed to create a temporary file: %s"
+msgstr "無法建立暫存檔案：%s"
-#: ../cut-n-paste/evmountoperation/ev-mount-operation.c:569
-msgid "_Remember forever"
-msgstr "永遠記住(_R)"
+#: ../libdocument/ev-file-helpers.c:308
+#, c-format
+msgid "Failed to create a temporary directory: %s"
+msgstr "無法建立暫存目錄：%s"
-#: ../cut-n-paste/smclient/eggdesktopfile.c:139
+#: ../cut-n-paste/smclient/eggdesktopfile.c:165
#, c-format
msgid "File is not a valid .desktop file"
-msgstr "檔案不是有效的 .desktop 檔"
+msgstr "檔案不是有效的 .desktop 檔案"
-#: ../cut-n-paste/smclient/eggdesktopfile.c:161
+#: ../cut-n-paste/smclient/eggdesktopfile.c:188
#, c-format
msgid "Unrecognized desktop file Version '%s'"
-msgstr "桌面檔案版本「%s」無法辨識"
+msgstr "無法辨識的桌面檔案版本「%s」"
-#: ../cut-n-paste/smclient/eggdesktopfile.c:872
+#: ../cut-n-paste/smclient/eggdesktopfile.c:958
#, c-format
msgid "Starting %s"
msgstr "準備啟動 %s"
-#: ../cut-n-paste/smclient/eggdesktopfile.c:1006
+#: ../cut-n-paste/smclient/eggdesktopfile.c:1100
#, c-format
msgid "Application does not accept documents on command line"
-msgstr "應用程式不接受從命令列傳入的文件"
+msgstr "應用程式不接受以命令列開啟文件"
-#: ../cut-n-paste/smclient/eggdesktopfile.c:1074
+#: ../cut-n-paste/smclient/eggdesktopfile.c:1168
#, c-format
msgid "Unrecognized launch option: %d"
msgstr "無法辨識的啟動選項：%d"
-#: ../cut-n-paste/smclient/eggdesktopfile.c:1276
+#: ../cut-n-paste/smclient/eggdesktopfile.c:1373
#, c-format
msgid "Can't pass document URIs to a 'Type=Link' desktop entry"
msgstr "不能傳送文件 URI 至「Type=Link」桌面項目"
-#: ../cut-n-paste/smclient/eggdesktopfile.c:1295
+#: ../cut-n-paste/smclient/eggdesktopfile.c:1392
#, c-format
msgid "Not a launchable item"
msgstr "不是可以啟動的項目"
-#: ../cut-n-paste/smclient/eggsmclient.c:185
+#: ../cut-n-paste/smclient/eggsmclient.c:225
msgid "Disable connection to session manager"
msgstr "停用到作業階段管理程式的連線"
-#: ../cut-n-paste/smclient/eggsmclient.c:188
+#: ../cut-n-paste/smclient/eggsmclient.c:228
msgid "Specify file containing saved configuration"
msgstr "指定含有已儲存組態的檔案"
-#: ../cut-n-paste/smclient/eggsmclient.c:188
+#: ../cut-n-paste/smclient/eggsmclient.c:228 ../previewer/ev-previewer.c:48
+#: ../previewer/ev-previewer.c:49
msgid "FILE"
-msgstr "程式名稱"
+msgstr "檔案"
-#: ../cut-n-paste/smclient/eggsmclient.c:191
+#: ../cut-n-paste/smclient/eggsmclient.c:231
msgid "Specify session management ID"
msgstr "指定作業階段管理 ID"
-#: ../cut-n-paste/smclient/eggsmclient.c:191
+#: ../cut-n-paste/smclient/eggsmclient.c:231
msgid "ID"
msgstr "ID"
-#: ../cut-n-paste/smclient/eggsmclient.c:227
-msgid "Session Management Options"
-msgstr "作業階段管理選項"
+#: ../cut-n-paste/smclient/eggsmclient.c:252
+msgid "Session management options:"
+msgstr "作業階段管理選項:"
-#: ../cut-n-paste/smclient/eggsmclient.c:228
-msgid "Show Session Management options"
+#: ../cut-n-paste/smclient/eggsmclient.c:253
+msgid "Show session management options"
msgstr "顯示作業階段管理選項"
#. Translaters: This string is for a toggle to display a toolbar.
#. * produce duplicates, but don't worry about it. If your language
#. * normally has a mnemonic at the start, please use the _. If not,
#. * please remove.
-#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:938
+#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:946
#, c-format
msgid "Show “_%s”"
-msgstr "顯示“_%s”"
+msgstr "顯示「%s」"
-#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1401
+#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1414
msgid "_Move on Toolbar"
-msgstr "在工具列中移動(_M)"
+msgstr "移至工具列(_M)"
-#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1402
+#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1415
msgid "Move the selected item on the toolbar"
-msgstr "å\9c¨å·¥å\85·å\88\97ä¸ç§»å\8b\95å·²é\81¸ç\9a\84é \85ç\9b®"
+msgstr "å°\87é\81¸å\8f\96ç\9a\84é \85ç\9b®ç§»è\87³å·¥å\85·å\88\97"
-#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1403
+#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1416
msgid "_Remove from Toolbar"
-msgstr "å\9c¨å·¥å\85·å\88\97ä¸\8a移除(_R)"
+msgstr "å¾\9eå·¥å\85·å\88\97移除(_R)"
-#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1404
+#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1417
msgid "Remove the selected item from the toolbar"
-msgstr "å\9c¨å·¥å\85·å\88\97ä¸ç§»é\99¤å·²é\81¸的項目"
+msgstr "å¾\9eå·¥å\85·å\88\97移é\99¤é\81¸å\8f\96的項目"
-#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1405
+#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1418
msgid "_Delete Toolbar"
-msgstr "移除工具列(_D)"
+msgstr "刪除工具列(_D)"
-#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1406
+#: ../cut-n-paste/toolbar-editor/egg-editable-toolbar.c:1419
msgid "Remove the selected toolbar"
-msgstr "移除已選的工具列"
+msgstr "移除選取的工具列"
-#: ../cut-n-paste/toolbar-editor/egg-toolbar-editor.c:441
+#: ../cut-n-paste/toolbar-editor/egg-toolbar-editor.c:486
msgid "Separator"
msgstr "分隔線"
-#: ../cut-n-paste/totem-screensaver/totem-scrsaver.c:111
-msgid "Running in presentation mode"
-msgstr "以簡報模式執行"
-
#. translators: this is the label for toolbar button
-#: ../cut-n-paste/zoom-control/ephy-zoom.h:48 ../shell/ev-window.c:4692
+#: ../cut-n-paste/zoom-control/ephy-zoom.h:48 ../shell/ev-window.c:5471
msgid "Best Fit"
msgstr "最適大小"
msgid "400%"
msgstr "400%"
-#: ../data/evince.desktop.in.in.h:1 ../shell/ev-window.c:3724
-#: ../shell/ev-window-title.c:132
+#: ../cut-n-paste/zoom-control/ephy-zoom.h:61
+msgid "800%"
+msgstr "800%"
+
+#: ../cut-n-paste/zoom-control/ephy-zoom.h:62
+msgid "1600%"
+msgstr "1600%"
+
+#: ../cut-n-paste/zoom-control/ephy-zoom.h:63
+msgid "3200%"
+msgstr "3200%"
+
+#: ../cut-n-paste/zoom-control/ephy-zoom.h:64
+msgid "6400%"
+msgstr "6400%"
+
+#. Manually set name and icon
+#: ../data/evince.desktop.in.in.h:1 ../shell/ev-window.c:4298
+#: ../shell/ev-window-title.c:149 ../shell/main.c:313
#, c-format
msgid "Document Viewer"
msgstr "文件檢視器"
#: ../data/evince.desktop.in.in.h:2
-msgid "View multipage documents"
-msgstr "é\96±è®\80文件"
+msgid "View multi-page documents"
+msgstr "顯示å¤\9aé \81文件"
-#: ../data/evince-password.glade.h:1
-msgid "Password Entry"
-msgstr "密碼輸入欄"
+#: ../data/org.gnome.Evince.gschema.xml.in.h:1
+msgid "Override document restrictions"
+msgstr "不理會文件的限制"
-#: ../data/evince-password.glade.h:2
-msgid "Remember password for this session"
-msgstr "在此作業階段中記住密碼"
+#: ../data/org.gnome.Evince.gschema.xml.in.h:2
+msgid "Override document restrictions, like restriction to copy or to print."
+msgstr "不理會文件的限制，例如不准複製或列印"
-#: ../data/evince-password.glade.h:3
-msgid "Save password in keyring"
-msgstr "å\84²å\98å¯\86碼æ\96¼é\91°å\8c\99å\9c\88ç¨\8bå¼\8fä¸"
+#: ../previewer/ev-previewer.c:47
+msgid "Delete the temporary file"
+msgstr "å\88ªé\99¤æ\9a«å\98æª\94æ¡\88"
-#: ../data/evince-properties.glade.h:1
-msgid "<b>Author:</b>"
-msgstr "<b>作者：</b>"
+#: ../previewer/ev-previewer.c:48
+msgid "Print settings file"
+msgstr "列印設定值檔案"
-#: ../data/evince-properties.glade.h:2
-msgid "<b>Created:</b>"
-msgstr "<b>製作時間：</b>"
+#: ../previewer/ev-previewer.c:147 ../previewer/ev-previewer.c:181
+msgid "GNOME Document Previewer"
+msgstr "GNOME 文件預覽器"
-#: ../data/evince-properties.glade.h:3
-msgid "<b>Creator:</b>"
-msgstr "<b>製作者：</b>"
+#: ../previewer/ev-previewer-window.c:91 ../shell/ev-window.c:3061
+msgid "Failed to print document"
+msgstr "無法列印文件"
-#: ../data/evince-properties.glade.h:4
-msgid "<b>Format:</b>"
-msgstr "<b>格式：</b>"
+#: ../previewer/ev-previewer-window.c:237
+#, c-format
+msgid "The selected printer '%s' could not be found"
+msgstr "找不到選取的印表機「%s」"
-#: ../data/evince-properties.glade.h:5
-msgid "<b>Keywords:</b>"
-msgstr "<b>關鍵字：</b>"
+#. Go menu
+#: ../previewer/ev-previewer-window.c:284 ../shell/ev-window.c:5212
+msgid "_Previous Page"
+msgstr "上一頁(_P)"
-#: ../data/evince-properties.glade.h:6
-msgid "<b>Modified:</b>"
-msgstr "<b>修改時間：</b>"
+#: ../previewer/ev-previewer-window.c:285 ../shell/ev-window.c:5213
+msgid "Go to the previous page"
+msgstr "回到上一頁"
-#: ../data/evince-properties.glade.h:7
-msgid "<b>Number of Pages:</b>"
-msgstr "<b>總頁數：</b>"
+#: ../previewer/ev-previewer-window.c:287 ../shell/ev-window.c:5215
+msgid "_Next Page"
+msgstr "下一頁(_N)"
-#: ../data/evince-properties.glade.h:8
-msgid "<b>Optimized:</b>"
-msgstr "<b>最佳化：</b>"
+#: ../previewer/ev-previewer-window.c:288 ../shell/ev-window.c:5216
+msgid "Go to the next page"
+msgstr "前往下一頁"
-#: ../data/evince-properties.glade.h:9
-msgid "<b>Paper Size:</b>"
-msgstr "<b>紙張大小：</b>"
+#: ../previewer/ev-previewer-window.c:291 ../shell/ev-window.c:5199
+msgid "Enlarge the document"
+msgstr "放大文件"
-#: ../data/evince-properties.glade.h:10
-msgid "<b>Producer:</b>"
-msgstr "<b>產生程式：</b>"
+#: ../previewer/ev-previewer-window.c:294 ../shell/ev-window.c:5202
+msgid "Shrink the document"
+msgstr "縮小文件"
-#: ../data/evince-properties.glade.h:11
-msgid "<b>Security:</b>"
-msgstr "<b>安全性：</b>"
+#: ../previewer/ev-previewer-window.c:297 ../libview/ev-print-operation.c:1307
+msgid "Print"
+msgstr "列印"
-#: ../data/evince-properties.glade.h:12
-msgid "<b>Subject:</b>"
-msgstr "<b>主旨：</b>"
+#: ../previewer/ev-previewer-window.c:298 ../shell/ev-window.c:5170
+msgid "Print this document"
+msgstr "列印這份文件"
-#: ../data/evince-properties.glade.h:13
-msgid "<b>Title:</b>"
-msgstr "<b>標題：</b>"
+#: ../previewer/ev-previewer-window.c:342 ../shell/ev-window.c:5314
+msgid "_Best Fit"
+msgstr "最適大小(_B)"
-#: ../data/evince.schemas.in.h:1
-msgid "Override document restrictions"
-msgstr "ä¸\8dç\90\86æ\9c\83æ\96\87件ç\9a\84é\99\90å\88¶"
+#: ../previewer/ev-previewer-window.c:343 ../shell/ev-window.c:5315
+msgid "Make the current document fill the window"
+msgstr "令è¦\96çª\97å\8f¯ä»¥é¡¯ç¤ºæ\95´é \81é \81é\9d¢"
-#: ../data/evince.schemas.in.h:2
-msgid "Override document restrictions, like restriction to copy or to print."
-msgstr "不理會文件的限制，例如不准複製或列印"
+#: ../previewer/ev-previewer-window.c:345 ../shell/ev-window.c:5317
+msgid "Fit Page _Width"
+msgstr "符合頁寬(_W)"
+
+#: ../previewer/ev-previewer-window.c:346 ../shell/ev-window.c:5318
+msgid "Make the current document fill the window width"
+msgstr "使目前文件符合視窗寬度"
+
+#: ../previewer/ev-previewer-window.c:558 ../shell/ev-window.c:5393
+msgid "Page"
+msgstr "頁次"
-#: ../properties/ev-properties-main.c:114
+#: ../previewer/ev-previewer-window.c:559 ../shell/ev-window.c:5394
+msgid "Select Page"
+msgstr "選擇頁次"
+
+#: ../properties/ev-properties-main.c:116
msgid "Document"
msgstr "文件"
-#: ../properties/ev-properties-view.c:180
+#: ../properties/ev-properties-view.c:60
+msgid "Title:"
+msgstr "標題:"
+
+#: ../properties/ev-properties-view.c:61
+msgid "Location:"
+msgstr "位置:"
+
+#: ../properties/ev-properties-view.c:62
+msgid "Subject:"
+msgstr "主旨:"
+
+#: ../properties/ev-properties-view.c:63
+msgid "Author:"
+msgstr "作者:"
+
+#: ../properties/ev-properties-view.c:64
+msgid "Keywords:"
+msgstr "關鍵字:"
+
+#: ../properties/ev-properties-view.c:65
+msgid "Producer:"
+msgstr "製作程式:"
+
+#: ../properties/ev-properties-view.c:66
+msgid "Creator:"
+msgstr "製作者:"
+
+#: ../properties/ev-properties-view.c:67
+msgid "Created:"
+msgstr "建立時刻:"
+
+#: ../properties/ev-properties-view.c:68
+msgid "Modified:"
+msgstr "修改時刻:"
+
+#: ../properties/ev-properties-view.c:69
+msgid "Number of Pages:"
+msgstr "頁數:"
+
+#: ../properties/ev-properties-view.c:70
+msgid "Optimized:"
+msgstr "最佳化:"
+
+#: ../properties/ev-properties-view.c:71
+msgid "Format:"
+msgstr "格式:"
+
+#: ../properties/ev-properties-view.c:72
+msgid "Security:"
+msgstr "安全性:"
+
+#: ../properties/ev-properties-view.c:73
+msgid "Paper Size:"
+msgstr "紙張大小:"
+
+#: ../properties/ev-properties-view.c:188 ../libview/ev-print-operation.c:1865
msgid "None"
msgstr "沒有"
#. * Do *not* translate it to "predefinito:mm", if it
#. * it isn't default:mm or default:inch it will not work
#.
-#: ../properties/ev-properties-view.c:205
-#: ../properties/ev-properties-view.c:367
+#: ../properties/ev-properties-view.c:217
msgid "default:mm"
msgstr "default:mm"
-#. Metric measurement (millimeters)
-#: ../properties/ev-properties-view.c:249
-#: ../properties/ev-properties-view.c:404
+#: ../properties/ev-properties-view.c:261
#, c-format
-msgid "%.0f x %.0f mm"
-msgstr "%.0f x %.0f 毫米"
+msgid "%.0f × %.0f mm"
+msgstr "%.0f × %.0f 毫米"
-#: ../properties/ev-properties-view.c:253
+#: ../properties/ev-properties-view.c:265
#, c-format
-msgid "%.2f x %.2f inch"
-msgstr "%.2f x %.2f 吋"
+msgid "%.2f × %.2f inch"
+msgstr "%.2f × %.2f 吋"
#. Note to translators: first placeholder is the paper name (eg.
#. * A4), second placeholder is the paper size (eg. 297x210 mm)
-#: ../properties/ev-properties-view.c:277
-#: ../properties/ev-properties-view.c:415
+#: ../properties/ev-properties-view.c:289
#, c-format
msgid "%s, Portrait (%s)"
msgstr "%s, 直向 (%s)"
#. Note to translators: first placeholder is the paper name (eg.
#. * A4), second placeholder is the paper size (eg. 297x210 mm)
-#: ../properties/ev-properties-view.c:284
-#: ../properties/ev-properties-view.c:422
+#: ../properties/ev-properties-view.c:296
#, c-format
msgid "%s, Landscape (%s)"
msgstr "%s, 橫向 (%s)"
-#. Imperial measurement (inches)
-#: ../properties/ev-properties-view.c:399
-#, c-format
-msgid "%.2f x %.2f in"
-msgstr "%.2f x %.2f 寸"
-
-#: ../shell/eggfindbar.c:146
-msgid "Search string"
-msgstr "搜尋字串"
-
-#: ../shell/eggfindbar.c:147
-msgid "The name of the string to be found"
-msgstr "欲搜尋的字串名稱"
-
-#: ../shell/eggfindbar.c:160
-msgid "Case sensitive"
-msgstr "區分大小寫"
-
-#: ../shell/eggfindbar.c:161
-msgid "TRUE for a case sensitive search"
-msgstr "TRUE 代表區分大小寫的搜尋"
-
-#: ../shell/eggfindbar.c:168
-msgid "Highlight color"
-msgstr "標示顏色"
-
-#: ../shell/eggfindbar.c:169
-msgid "Color of highlight for all matches"
-msgstr "用來標示所有符合字串的顏色"
-
-#: ../shell/eggfindbar.c:175
-msgid "Current color"
-msgstr "目前的顏色"
-
-#: ../shell/eggfindbar.c:176
-msgid "Color of highlight for the current match"
-msgstr "用來標示目前符合字串的顏色"
-
-#: ../shell/eggfindbar.c:320
-msgid "Find:"
-msgstr "尋找："
-
-#: ../shell/eggfindbar.c:329
-msgid "Find Previous"
-msgstr "尋找上一個"
-
-#: ../shell/eggfindbar.c:333 ../shell/eggfindbar.c:336
-msgid "Find previous occurrence of the search string"
-msgstr "尋找上一個出現的搜尋字串"
-
-#: ../shell/eggfindbar.c:342
-msgid "Find Next"
-msgstr "找下一個"
-
-#: ../shell/eggfindbar.c:346 ../shell/eggfindbar.c:349
-msgid "Find next occurrence of the search string"
-msgstr "尋找下一個出現的搜尋字串"
-
-#: ../shell/eggfindbar.c:358
-msgid "C_ase Sensitive"
-msgstr "區分大小寫(_A)"
-
-#: ../shell/eggfindbar.c:362 ../shell/eggfindbar.c:365
-msgid "Toggle case sensitive search"
-msgstr "切換區分大小寫的搜尋"
-
-#: ../shell/ev-jobs.c:962
-#, c-format
-msgid "Failed to create file “%s”: %s"
-msgstr "無法建立檔案“%s”：%s"
-
-#: ../shell/ev-open-recent-action.c:73
-msgid "Open a recently used document"
-msgstr "開啟最近使用的文件"
-
# (Abel) 這裡是頁數 (%d of %d)
-#: ../shell/ev-page-action.c:76
+#: ../libmisc/ev-page-action-widget.c:68
#, c-format
msgid "(%d of %d)"
msgstr "(%d / %d)"
# (Abel) 這裡是頁數 (%d of %d)
-#: ../shell/ev-page-action.c:78
+#: ../libmisc/ev-page-action-widget.c:70
#, c-format
msgid "of %d"
msgstr "/ %d"
-#: ../shell/ev-password.c:88
-msgid "Password required"
-msgstr "需要密碼"
+#. Create tree view
+#: ../libview/ev-loading-window.c:76 ../shell/ev-sidebar-annotations.c:111
+#: ../shell/ev-sidebar-layers.c:125 ../shell/ev-sidebar-links.c:262
+msgid "Loading…"
+msgstr "載入中…"
-#: ../shell/ev-password.c:89
-#, c-format
-msgid ""
-"The document “%s” is locked and requires a password before it can be opened."
-msgstr "文件 %s 已被鎖上，需要密碼才能開啟。"
+#. Initial state
+#: ../libview/ev-print-operation.c:334
+msgid "Preparing to print…"
+msgstr "正在準備列印…"
-#: ../shell/ev-password.c:154
-msgid "Enter password"
-msgstr "輸入密碼"
+#: ../libview/ev-print-operation.c:336
+msgid "Finishing…"
+msgstr "正在結束…"
-#: ../shell/ev-password.c:260
+#: ../libview/ev-print-operation.c:338
#, c-format
-msgid "Password for document %s"
-msgstr "用於 %s 的密碼"
+msgid "Printing page %d of %d…"
+msgstr "正在列印頁面 %d / %d…"
-#: ../shell/ev-password.c:347
-msgid "Incorrect password"
-msgstr "密碼不正確"
+#: ../libview/ev-print-operation.c:1161
+msgid "Printing is not supported on this printer."
+msgstr "這台印表機不支援列印。"
-#: ../shell/ev-password-view.c:112
-msgid ""
-"This document is locked and can only be read by entering the correct "
-"password."
-msgstr "這份文件已被鎖上，只有在輸入正確密碼之後才能閱讀。"
+#: ../libview/ev-print-operation.c:1226
+msgid "Invalid page selection"
+msgstr "無效的頁面選擇區域"
-#: ../shell/ev-password-view.c:121
-msgid "_Unlock Document"
-msgstr "文件解鎖(_U)"
+#: ../libview/ev-print-operation.c:1227
+msgid "Warning"
+msgstr "警告"
-#: ../shell/ev-properties-dialog.c:57
-msgid "Properties"
-msgstr "屬性"
+#: ../libview/ev-print-operation.c:1229
+msgid "Your print range selection does not include any pages"
+msgstr "您選擇的列印範圍並未包含任何頁面"
-#: ../shell/ev-properties-dialog.c:90
-msgid "General"
-msgstr "一般"
+#: ../libview/ev-print-operation.c:1860
+msgid "Page Scaling:"
+msgstr "頁面縮放："
-#: ../shell/ev-properties-dialog.c:100
-msgid "Fonts"
-msgstr "字型"
+#: ../libview/ev-print-operation.c:1866
+msgid "Shrink to Printable Area"
+msgstr "縮減至可列印區域"
-#: ../shell/ev-properties-fonts.c:139
-msgid "Font"
-msgstr "字型"
+#: ../libview/ev-print-operation.c:1867
+msgid "Fit to Printable Area"
+msgstr "符合可列印區域"
-#: ../shell/ev-properties-fonts.c:150
-#, c-format
-msgid "Gathering font information... %3d%%"
-msgstr "正在搜集字型資料... %3d%%"
+#: ../libview/ev-print-operation.c:1870
+msgid ""
+"Scale document pages to fit the selected printer page. Select from one of "
+"the following:\n"
+"\n"
+"• \"None\": No page scaling is performed.\n"
+"\n"
+"• \"Shrink to Printable Area\": Document pages larger than the printable "
+"area are reduced to fit the printable area of the printer page.\n"
+"\n"
+"• \"Fit to Printable Area\": Document pages are enlarged or reduced as "
+"required to fit the printable area of the printer page.\n"
+msgstr ""
+"將文件縮放至可列印區域。可選擇以下選項：\n"
+"\n"
+"• \"沒有\"：不進行頁面的縮放。\n"
+"\n"
+"• \"符合可列印區域\"：文件頁面超過可列印區域時會被縮小以符合印表機的可列印區"
+"域。\n"
+"\n"
+"• \"縮減至可列印區域\"：文件頁面會被放大或縮小以符合印表機的可列印區域。\n"
-#: ../shell/ev-sidebar-attachments.c:693
-msgid "Attachments"
-msgstr "附件"
+#: ../libview/ev-print-operation.c:1882
+msgid "Auto Rotate and Center"
+msgstr "自動旋轉並置中"
-#: ../shell/ev-sidebar-links.c:267 ../shell/ev-view.c:3644
-msgid "Loading..."
-msgstr "載入中..."
+#: ../libview/ev-print-operation.c:1885
+msgid ""
+"Rotate printer page orientation of each page to match orientation of each "
+"document page. Document pages will be centered within the printer page."
+msgstr ""
+"旋轉每一頁的印表機頁面方向以符合文件頁面的方向。文件的頁面會在印表機的頁面裡"
+"置中。"
-#: ../shell/ev-sidebar-links.c:340
-msgid "Print..."
-msgstr "列印..."
+#: ../libview/ev-print-operation.c:1890
+msgid "Select page size using document page size"
+msgstr "使用文件頁面大小來選擇頁面大小"
-#: ../shell/ev-sidebar-links.c:720
-msgid "Index"
-msgstr "索引"
+#: ../libview/ev-print-operation.c:1892
+msgid ""
+"When enabled, each page will be printed on the same size paper as the "
+"document page."
+msgstr "當啟用時，每一頁都會按照文件中的頁面大小列印。"
-#: ../shell/ev-sidebar-thumbnails.c:731
-msgid "Thumbnails"
-msgstr "縮圖"
+#: ../libview/ev-print-operation.c:1974
+msgid "Page Handling"
+msgstr "頁面處理方式"
+
+#: ../libview/ev-jobs.c:1529
+#, c-format
+msgid "Failed to print page %d: %s"
+msgstr "無法列印頁面 %d：%s"
-#: ../shell/ev-view-accessible.c:41
+#: ../libview/ev-view-accessible.c:46
msgid "Scroll Up"
msgstr "向上捲動"
-#: ../shell/ev-view-accessible.c:42
+#: ../libview/ev-view-accessible.c:47
msgid "Scroll Down"
msgstr "向下捲動"
-#: ../shell/ev-view-accessible.c:48
+#: ../libview/ev-view-accessible.c:53
msgid "Scroll View Up"
msgstr "向上檢視"
-#: ../shell/ev-view-accessible.c:49
+#: ../libview/ev-view-accessible.c:54
msgid "Scroll View Down"
msgstr "向下檢視"
-#: ../shell/ev-view-accessible.c:533
+#: ../libview/ev-view-accessible.c:885
msgid "Document View"
msgstr "文件檢視器"
-#: ../shell/ev-view.c:1437
+#: ../libview/ev-view-presentation.c:672
+msgid "Jump to page:"
+msgstr "前往頁："
+
+#: ../libview/ev-view-presentation.c:968
+msgid "End of presentation. Click to exit."
+msgstr "簡報已完結。請點一下離開。"
+
+#: ../libview/ev-view.c:1755
msgid "Go to first page"
msgstr "回到第一頁"
-#: ../shell/ev-view.c:1439
+#: ../libview/ev-view.c:1757
msgid "Go to previous page"
msgstr "回到上一頁"
-#: ../shell/ev-view.c:1441
+#: ../libview/ev-view.c:1759
msgid "Go to next page"
msgstr "前往下一頁"
-#: ../shell/ev-view.c:1443
+#: ../libview/ev-view.c:1761
msgid "Go to last page"
msgstr "前往最後一頁"
-#: ../shell/ev-view.c:1445
+#: ../libview/ev-view.c:1763
msgid "Go to page"
msgstr "前往頁"
-#: ../shell/ev-view.c:1447
+#: ../libview/ev-view.c:1765
msgid "Find"
msgstr "尋找"
-#: ../shell/ev-view.c:1475
+#: ../libview/ev-view.c:1793
#, c-format
msgid "Go to page %s"
msgstr "前往第 %s 頁"
-#: ../shell/ev-view.c:1481
+#: ../libview/ev-view.c:1799
#, c-format
msgid "Go to %s on file “%s”"
msgstr "前往檔案“%s”上的 %s"
-#: ../shell/ev-view.c:1484
+#: ../libview/ev-view.c:1802
#, c-format
msgid "Go to file “%s”"
msgstr "前往檔案“%s”"
-#: ../shell/ev-view.c:1492
+#: ../libview/ev-view.c:1810
#, c-format
msgid "Launch %s"
msgstr "執行 %s"
-#: ../shell/ev-view.c:2444
-msgid "End of presentation. Press Escape to exit."
-msgstr "簡報已完結。按 Escape 離開。"
+#: ../shell/eggfindbar.c:320
+msgid "Find:"
+msgstr "尋找："
-#: ../shell/ev-view.c:3374
-msgid "Jump to page:"
-msgstr "前往頁："
+#: ../shell/eggfindbar.c:329 ../shell/ev-window.c:5187
+msgid "Find Pre_vious"
+msgstr "找上一個(_V)"
-#: ../shell/ev-window.c:793
+#: ../shell/eggfindbar.c:333
+msgid "Find previous occurrence of the search string"
+msgstr "尋找上一個出現搜尋字串的地方"
+
+#: ../shell/eggfindbar.c:337 ../shell/ev-window.c:5185
+msgid "Find Ne_xt"
+msgstr "找下一個(_X)"
+
+#: ../shell/eggfindbar.c:341
+msgid "Find next occurrence of the search string"
+msgstr "尋找下一個出現搜尋字串的地方"
+
+#: ../shell/eggfindbar.c:348
+msgid "C_ase Sensitive"
+msgstr "區分大小寫(_A)"
+
+#: ../shell/eggfindbar.c:351
+msgid "Toggle case sensitive search"
+msgstr "選取後在搜尋時將區分大小寫"
+
+#: ../shell/ev-application.c:1022
+msgid "Running in presentation mode"
+msgstr "以簡報模式執行"
+
+#: ../shell/ev-keyring.c:102
+#, c-format
+msgid "Password for document %s"
+msgstr "用於 %s 的密碼"
+
+#: ../shell/ev-convert-metadata.c:88
+#, c-format
+msgid "Converting %s"
+msgstr "正在轉換 %s"
+
+#: ../shell/ev-convert-metadata.c:92
+#, c-format
+msgid "%d of %d documents converted"
+msgstr "%d / %d 份文件已轉換"
+
+#: ../shell/ev-convert-metadata.c:165 ../shell/ev-convert-metadata.c:181
+msgid "Converting metadata"
+msgstr "正在轉換中繼資料"
+
+#: ../shell/ev-convert-metadata.c:187
+msgid ""
+"The metadata format used by Evince has changed, and hence it needs to be "
+"migrated. If the migration is cancelled the metadata storage will not work."
+msgstr ""
+"Evince 所使用的中繼資料已經改變，因此需要做轉移。如果轉移的動作被取消，中繼資"
+"料的儲存就無法運作。"
+
+#: ../shell/ev-open-recent-action.c:72
+msgid "Open a recently used document"
+msgstr "開啟最近使用的文件"
+
+#: ../shell/ev-password-view.c:144
+msgid ""
+"This document is locked and can only be read by entering the correct "
+"password."
+msgstr "這份文件已被鎖上，只有在輸入正確密碼之後才能閱讀。"
+
+#: ../shell/ev-password-view.c:153 ../shell/ev-password-view.c:272
+msgid "_Unlock Document"
+msgstr "文件解鎖(_U)"
+
+#: ../shell/ev-password-view.c:264
+msgid "Enter password"
+msgstr "輸入密碼"
+
+#: ../shell/ev-password-view.c:304
+msgid "Password required"
+msgstr "需要密碼"
+
+#: ../shell/ev-password-view.c:305
+#, c-format
+msgid ""
+"The document “%s” is locked and requires a password before it can be opened."
+msgstr "文件 %s 已被鎖上，需要密碼才能開啟。"
+
+#: ../shell/ev-password-view.c:335
+msgid "_Password:"
+msgstr "密碼(_P):"
+
+#: ../shell/ev-password-view.c:368
+msgid "Forget password _immediately"
+msgstr "立刻忘記密碼(_I) "
+
+#: ../shell/ev-password-view.c:380
+msgid "Remember password until you _log out"
+msgstr "在您登出前記住密碼(_L)"
+
+#: ../shell/ev-password-view.c:392
+msgid "Remember _forever"
+msgstr "永遠記住密碼(_F)"
+
+#: ../shell/ev-properties-dialog.c:62
+msgid "Properties"
+msgstr "屬性"
+
+#: ../shell/ev-properties-dialog.c:95
+msgid "General"
+msgstr "一般"
+
+#: ../shell/ev-properties-dialog.c:105
+msgid "Fonts"
+msgstr "字型"
+
+#: ../shell/ev-properties-dialog.c:118
+msgid "Document License"
+msgstr "文件授權"
+
+#: ../shell/ev-properties-fonts.c:135
+msgid "Font"
+msgstr "字型"
+
+#: ../shell/ev-properties-fonts.c:162
+#, c-format
+msgid "Gathering font information… %3d%%"
+msgstr "正在搜集字型資料… %3d%%"
+
+#: ../shell/ev-properties-license.c:137
+msgid "Usage terms"
+msgstr "使用條款"
+
+#: ../shell/ev-properties-license.c:143
+msgid "Text License"
+msgstr "文字授權"
+
+#: ../shell/ev-properties-license.c:149
+msgid "Further Information"
+msgstr "更多資訊"
+
+#: ../shell/ev-sidebar-annotations.c:239
+msgid "Document contains no annotations"
+msgstr "文件不包含任何註解"
+
+#: ../shell/ev-sidebar-annotations.c:271
+#, c-format
+msgid "Page %d"
+msgstr "第 %d 頁"
+
+#: ../shell/ev-sidebar-annotations.c:392
+msgid "Annotations"
+msgstr "註解"
+
+#: ../shell/ev-sidebar-attachments.c:697
+msgid "Attachments"
+msgstr "附加檔案"
+
+#: ../shell/ev-sidebar-layers.c:401
+msgid "Layers"
+msgstr "圖層"
+
+#: ../shell/ev-sidebar-links.c:335
+msgid "Print…"
+msgstr "列印…"
+
+#: ../shell/ev-sidebar-links.c:750
+msgid "Index"
+msgstr "索引"
+
+#: ../shell/ev-sidebar-thumbnails.c:965
+msgid "Thumbnails"
+msgstr "縮圖"
+
+#: ../shell/ev-window.c:851
#, c-format
-msgid "Page %s - %s"
-msgstr "頁 %s - %s"
+msgid "Page %s — %s"
+msgstr "頁 %s — %s"
-#: ../shell/ev-window.c:795
+#: ../shell/ev-window.c:853
#, c-format
msgid "Page %s"
msgstr "頁 %s"
-#: ../shell/ev-window.c:1204
+#: ../shell/ev-window.c:1318
msgid "The document contains no pages"
msgstr "此文件不包含任何頁面"
-#: ../shell/ev-window.c:1428 ../shell/ev-window.c:1503
+#: ../shell/ev-window.c:1321
+msgid "The document contains only empty pages"
+msgstr "文件只包含空白頁面"
+
+#: ../shell/ev-window.c:1521 ../shell/ev-window.c:1687
msgid "Unable to open document"
msgstr "無法開啟文件"
-#: ../shell/ev-window.c:1700
+#: ../shell/ev-window.c:1658
+#, c-format
+msgid "Loading document from “%s”"
+msgstr "正在從「%s」載入文件"
+
+#: ../shell/ev-window.c:1800 ../shell/ev-window.c:2078
+#, c-format
+msgid "Downloading document (%d%%)"
+msgstr "正在下載文件 (%d%%)"
+
+#: ../shell/ev-window.c:1833
+msgid "Failed to load remote file."
+msgstr "載入遠端的檔案失敗。"
+
+#: ../shell/ev-window.c:2022
+#, c-format
+msgid "Reloading document from %s"
+msgstr "從 %s 重新載入文件"
+
+#: ../shell/ev-window.c:2054
+msgid "Failed to reload document."
+msgstr "重新載入文件失敗。"
+
+#: ../shell/ev-window.c:2209
msgid "Open Document"
msgstr "開啟文件"
-#: ../shell/ev-window.c:1761
+#: ../shell/ev-window.c:2507
#, c-format
-msgid "Couldn't create symlink “%s”: %s"
-msgstr "無法建立符號連結“%s”：%s"
+msgid "Saving document to %s"
+msgstr "正儲存文件到 %s"
-#: ../shell/ev-window.c:1790
-msgid "Cannot open a copy."
-msgstr "無法開啟副本。"
+#: ../shell/ev-window.c:2510
+#, c-format
+msgid "Saving attachment to %s"
+msgstr "正儲存附加檔案到 %s"
-#: ../shell/ev-window.c:2034 ../shell/ev-window.c:2084
+#: ../shell/ev-window.c:2513
+#, c-format
+msgid "Saving image to %s"
+msgstr "正儲存圖片到 %s"
+
+#: ../shell/ev-window.c:2557 ../shell/ev-window.c:2657
#, c-format
msgid "The file could not be saved as “%s”."
msgstr "檔案無法儲存為“%s”。"
-#: ../shell/ev-window.c:2129
+#: ../shell/ev-window.c:2588
+#, c-format
+msgid "Uploading document (%d%%)"
+msgstr "正在上傳文件 (%d%%)"
+
+#: ../shell/ev-window.c:2592
+#, c-format
+msgid "Uploading attachment (%d%%)"
+msgstr "正在上傳附加檔案 (%d%%)"
+
+#: ../shell/ev-window.c:2596
+#, c-format
+msgid "Uploading image (%d%%)"
+msgstr "正在上傳圖片 (%d%%)"
+
+#: ../shell/ev-window.c:2720
msgid "Save a Copy"
msgstr "儲存副本"
-#: ../shell/ev-window.c:2250 ../shell/ev-window.c:3425
-msgid "Failed to print document"
-msgstr "無法列印文件"
+#: ../shell/ev-window.c:3005
+#, c-format
+msgid "%d pending job in queue"
+msgid_plural "%d pending jobs in queue"
+msgstr[0] "佇列中 %d 項預定的工作"
-#: ../shell/ev-window.c:2415
-msgid "Printing is not supported on this printer."
-msgstr "這台印表機不支援列印。"
+#: ../shell/ev-window.c:3118
+#, c-format
+msgid "Printing job “%s”"
+msgstr "正在列印工作“%s”"
-#: ../shell/ev-window.c:2541 ../shell/ev-window.c:4484
-msgid "Print"
-msgstr "列印"
+#: ../shell/ev-window.c:3330
+#, c-format
+msgid "Wait until print job “%s” finishes before closing?"
+msgstr "在關閉前是否要等待列印工作“%s”結束？"
-#: ../shell/ev-window.c:3208
+#: ../shell/ev-window.c:3333
+#, c-format
+msgid ""
+"There are %d print jobs active. Wait until print finishes before closing?"
+msgstr "還有 %d 項列印工作在使用中。在關閉前是否要等待列印結束？"
+
+#: ../shell/ev-window.c:3345
+msgid "If you close the window, pending print jobs will not be printed."
+msgstr "如果您關閉視窗，預定的列印工作將不會列印。"
+
+#: ../shell/ev-window.c:3349
+msgid "Cancel _print and Close"
+msgstr "取消列印並關閉(_P)"
+
+#: ../shell/ev-window.c:3353
+msgid "Close _after Printing"
+msgstr "於列印完成後關閉(_A)"
+
+#: ../shell/ev-window.c:3943
msgid "Toolbar Editor"
msgstr "工具列編輯器"
-#: ../shell/ev-window.c:3720
+#: ../shell/ev-window.c:4082
+msgid "There was an error displaying help"
+msgstr "顯示說明文件時發生錯誤"
+
+#: ../shell/ev-window.c:4294
#, c-format
msgid ""
-"Document Viewer.\n"
-"Using poppler %s (%s)"
+"Document Viewer\n"
+"Using %s (%s)"
msgstr ""
-"文件檢視器。\n"
-"使用 poppler %s (%s)"
+"文件檢視器\n"
+"使用 %s (%s)"
# (Abel) 大致上參考 slat.org 的建議
-#: ../shell/ev-window.c:3748
+#: ../shell/ev-window.c:4325
msgid ""
"Evince is free software; you can redistribute it and/or modify it under the "
"terms of the GNU General Public License as published by the Free Software "
"就本程式再為散佈與／或修改；無論您依據的是本授權的第二版或（您自行選擇的）任"
"一日後發行的版本。\n"
-#: ../shell/ev-window.c:3752
+#: ../shell/ev-window.c:4329
msgid ""
"Evince is distributed in the hope that it will be useful, but WITHOUT ANY "
"WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS "
"Evince 係基於使用目的而加以散佈，然而不負任何擔保責任；亦無對適售性或特定目的"
"適用性所為的默示性擔保。詳情請參照 GNU 通用公共授權。\n"
-#: ../shell/ev-window.c:3756
+#: ../shell/ev-window.c:4333
msgid ""
"You should have received a copy of the GNU General Public License along with "
-"Evince; if not, write to the Free Software Foundation, Inc., 59 Temple "
-"Place, Suite 330, Boston, MA 02111-1307 USA\n"
+"Evince; if not, write to the Free Software Foundation, Inc., 51 Franklin "
+"Street, Fifth Floor, Boston, MA 02110-1301 USA\n"
msgstr ""
-"您應已收到附隨於 Evince 的 GNU 通用公共授權的副本；如無，請寫信至自由軟體基金"
-"會：59 Temple Place, Suite 330, Boston, MA 02111-1307 USA\n"
+"您應該已經和 Evince 程式一起收到一份 GNU 通用公共許可證的副本。如果還沒有，寫"
+"信給： the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, "
+"Boston, MA 02110-1301 USA\n"
-#: ../shell/ev-window.c:3780
+#: ../shell/ev-window.c:4358
msgid "Evince"
msgstr "Evince"
-#: ../shell/ev-window.c:3783
-msgid "© 1996-2007 The Evince authors"
-msgstr "© 1996-2007 Evince 作者"
+#: ../shell/ev-window.c:4361
+msgid "© 1996–2009 The Evince authors"
+msgstr "© 1996-2009 Evince 作者群"
-#: ../shell/ev-window.c:3789
+#: ../shell/ev-window.c:4367
msgid "translator-credits"
msgstr ""
"如對翻譯有任何意見，請送一封電子郵件給\n"
"以下地址，GNOME 翻譯團隊會儘快回覆您：\n"
-"community@linuxhall.org\n"
+"zh-l10n@lists.linux.org.tw\n"
"\n"
"Woodman Tuen <wmtuen@gmail.com>, 2006-07\n"
"趙惟倫 <chaoweilun@pcmail.com.tw>, 2005\n"
#. TRANS: Sometimes this could be better translated as
#. "%d hit(s) on this page". Therefore this string
#. contains plural cases.
-#: ../shell/ev-window.c:4005
+#: ../shell/ev-window.c:4643
#, c-format
msgid "%d found on this page"
msgid_plural "%d found on this page"
msgstr[0] "本頁找到 %d 處"
-#: ../shell/ev-window.c:4013
+#: ../shell/ev-window.c:4651
#, c-format
msgid "%3d%% remaining to search"
msgstr "還有 %3d%% 尚待搜尋"
-#: ../shell/ev-window.c:4396
+#: ../shell/ev-window.c:5153
msgid "_File"
msgstr "檔案(_F)"
-#: ../shell/ev-window.c:4397
+#: ../shell/ev-window.c:5154
msgid "_Edit"
msgstr "編輯(_E)"
-#: ../shell/ev-window.c:4398
+#: ../shell/ev-window.c:5155
msgid "_View"
-msgstr "顯示(_V)"
+msgstr "檢視(_V)"
-#: ../shell/ev-window.c:4399
+#: ../shell/ev-window.c:5156
msgid "_Go"
msgstr "前往(_G)"
-#: ../shell/ev-window.c:4400
+#: ../shell/ev-window.c:5157
msgid "_Help"
msgstr "求助(_H)"
#. File menu
-#: ../shell/ev-window.c:4403 ../shell/ev-window.c:4582
-#: ../shell/ev-window.c:4654
-msgid "_Open..."
-msgstr "開啟(_O)..."
+#: ../shell/ev-window.c:5160 ../shell/ev-window.c:5433
+msgid "_Open…"
+msgstr "開啟(_O)…"
-#: ../shell/ev-window.c:4404 ../shell/ev-window.c:4655
+#: ../shell/ev-window.c:5161 ../shell/ev-window.c:5434
msgid "Open an existing document"
msgstr "開啟現存文件"
-#: ../shell/ev-window.c:4406
+#: ../shell/ev-window.c:5163
msgid "Op_en a Copy"
msgstr "開啟副本(_E)"
-#: ../shell/ev-window.c:4407
+#: ../shell/ev-window.c:5164
msgid "Open a copy of the current document in a new window"
msgstr "在新的視窗開啟目前文件的副本"
-#: ../shell/ev-window.c:4409 ../shell/ev-window.c:4584
-msgid "_Save a Copy..."
-msgstr "儲存副本(_S)..."
+#: ../shell/ev-window.c:5166
+msgid "_Save a Copy…"
+msgstr "儲存副本(_S)…"
-#: ../shell/ev-window.c:4410
+#: ../shell/ev-window.c:5167
msgid "Save a copy of the current document"
msgstr "儲存一個目前文件的副本"
-#: ../shell/ev-window.c:4412
-msgid "Print Set_up..."
-msgstr "列印設定(_U)..."
-
-#: ../shell/ev-window.c:4413
-msgid "Setup the page settings for printing"
-msgstr "列印的頁面設定"
-
-#: ../shell/ev-window.c:4415
-msgid "_Print..."
-msgstr "列印(_P)..."
+#: ../shell/ev-window.c:5169
+msgid "_Print…"
+msgstr "列印(_P)…"
-#: ../shell/ev-window.c:4416 ../shell/ev-window.c:4485
-msgid "Print this document"
-msgstr "列印目前的文件"
-
-#: ../shell/ev-window.c:4418
+#: ../shell/ev-window.c:5172
msgid "P_roperties"
msgstr "屬性(_R)"
-#: ../shell/ev-window.c:4426
+#: ../shell/ev-window.c:5180
msgid "Select _All"
msgstr "全部選取(_A)"
-#: ../shell/ev-window.c:4428
-msgid "_Find..."
-msgstr "尋找(_F)..."
+#: ../shell/ev-window.c:5182
+msgid "_Find…"
+msgstr "尋找(_F)…"
-#: ../shell/ev-window.c:4429
+#: ../shell/ev-window.c:5183
msgid "Find a word or phrase in the document"
msgstr "在文件中尋找字詞"
-#: ../shell/ev-window.c:4431
-msgid "Find Ne_xt"
-msgstr "繼續尋找(_X)"
-
-#: ../shell/ev-window.c:4433
-msgid "Find Pre_vious"
-msgstr "尋找上一個(_V)"
-
-#: ../shell/ev-window.c:4435
+#: ../shell/ev-window.c:5189
msgid "T_oolbar"
msgstr "工具列(_O)"
-#: ../shell/ev-window.c:4437
+#: ../shell/ev-window.c:5191
msgid "Rotate _Left"
msgstr "向左旋轉(_L)"
-#: ../shell/ev-window.c:4439
+#: ../shell/ev-window.c:5193
msgid "Rotate _Right"
msgstr "向右旋轉(_R)"
-#: ../shell/ev-window.c:4444
-msgid "Enlarge the document"
-msgstr "放大文件"
-
-#: ../shell/ev-window.c:4447
-msgid "Shrink the document"
-msgstr "縮小文件"
-
-#: ../shell/ev-window.c:4449
+#: ../shell/ev-window.c:5204
msgid "_Reload"
msgstr "重新載入(_R)"
-#: ../shell/ev-window.c:4450
+#: ../shell/ev-window.c:5205
msgid "Reload the document"
msgstr "重新載入文件"
-#: ../shell/ev-window.c:4453
+#: ../shell/ev-window.c:5208
msgid "Auto_scroll"
msgstr "自動捲動(_S)"
-#. Go menu
-#: ../shell/ev-window.c:4457
-msgid "_Previous Page"
-msgstr "上一頁(_P)"
-
-#: ../shell/ev-window.c:4458
-msgid "Go to the previous page"
-msgstr "回到上一頁"
-
-#: ../shell/ev-window.c:4460
-msgid "_Next Page"
-msgstr "下一頁(_N)"
-
-#: ../shell/ev-window.c:4461
-msgid "Go to the next page"
-msgstr "前往下一頁"
-
-#: ../shell/ev-window.c:4463
+#: ../shell/ev-window.c:5218
msgid "_First Page"
msgstr "第一頁(_F)"
-#: ../shell/ev-window.c:4464
+#: ../shell/ev-window.c:5219
msgid "Go to the first page"
msgstr "回到第一頁"
-#: ../shell/ev-window.c:4466
+#: ../shell/ev-window.c:5221
msgid "_Last Page"
msgstr "最後一頁(_L)"
-#: ../shell/ev-window.c:4467
+#: ../shell/ev-window.c:5222
msgid "Go to the last page"
msgstr "前往最後一頁"
#. Help menu
-#: ../shell/ev-window.c:4471
+#: ../shell/ev-window.c:5226
msgid "_Contents"
msgstr "內容(_C)"
-#: ../shell/ev-window.c:4474
+#: ../shell/ev-window.c:5229
msgid "_About"
msgstr "關於(_A)"
#. Toolbar-only
-#: ../shell/ev-window.c:4478
+#: ../shell/ev-window.c:5233
msgid "Leave Fullscreen"
-msgstr "離開全螢幕模式"
+msgstr "離開全螢幕"
-#: ../shell/ev-window.c:4479
+#: ../shell/ev-window.c:5234
msgid "Leave fullscreen mode"
msgstr "離開全螢幕模式"
-#: ../shell/ev-window.c:4481
+#: ../shell/ev-window.c:5236
msgid "Start Presentation"
msgstr "開始簡報"
-#: ../shell/ev-window.c:4482
+#: ../shell/ev-window.c:5237
msgid "Start a presentation"
msgstr "簡報式顯示"
#. View Menu
-#: ../shell/ev-window.c:4538
+#: ../shell/ev-window.c:5296
msgid "_Toolbar"
msgstr "工具列(_T)"
-#: ../shell/ev-window.c:4539
+#: ../shell/ev-window.c:5297
msgid "Show or hide the toolbar"
msgstr "顯示或隱藏工具列"
-#: ../shell/ev-window.c:4541
+#: ../shell/ev-window.c:5299
msgid "Side _Pane"
-msgstr "å\81´é\9d¢窗格(_P)"
+msgstr "å\81´é\82\8a窗格(_P)"
-#: ../shell/ev-window.c:4542
+#: ../shell/ev-window.c:5300
msgid "Show or hide the side pane"
msgstr "顯示或隱藏側面窗格"
-#: ../shell/ev-window.c:4544
+#: ../shell/ev-window.c:5302
msgid "_Continuous"
msgstr "連續(_C)"
-#: ../shell/ev-window.c:4545
+#: ../shell/ev-window.c:5303
msgid "Show the entire document"
msgstr "顯示整份文件"
-#: ../shell/ev-window.c:4547
+#: ../shell/ev-window.c:5305
msgid "_Dual"
msgstr "兩頁(_D)"
-#: ../shell/ev-window.c:4548
+#: ../shell/ev-window.c:5306
msgid "Show two pages at once"
msgstr "一次顯示兩頁"
-#: ../shell/ev-window.c:4550
+#: ../shell/ev-window.c:5308
msgid "_Fullscreen"
msgstr "全螢幕(_F)"
-#: ../shell/ev-window.c:4551
+#: ../shell/ev-window.c:5309
msgid "Expand the window to fill the screen"
msgstr "將視窗展開為全螢幕"
-#: ../shell/ev-window.c:4553
+#: ../shell/ev-window.c:5311
msgid "Pre_sentation"
msgstr "簡報(_S)"
-#: ../shell/ev-window.c:4554
+#: ../shell/ev-window.c:5312
msgid "Run document as a presentation"
msgstr "如同簡報般執行文件"
-#: ../shell/ev-window.c:4556
-msgid "_Best Fit"
-msgstr "最適大小(_B)"
+#: ../shell/ev-window.c:5320
+msgid "_Inverted Colors"
+msgstr "反轉顏色(_I)"
-#: ../shell/ev-window.c:4557
-msgid "Make the current document fill the window"
-msgstr "令視窗可以顯示整頁頁面"
-
-#: ../shell/ev-window.c:4559
-msgid "Fit Page _Width"
-msgstr "符合頁寬(_W)"
-
-#: ../shell/ev-window.c:4560
-msgid "Make the current document fill the window width"
-msgstr "使目前文件符合視窗寬度"
+#: ../shell/ev-window.c:5321
+msgid "Show page contents with the colors inverted"
+msgstr "以顏色反轉的方式顯示頁面內容"
#. Links
-#: ../shell/ev-window.c:4567
+#: ../shell/ev-window.c:5329
msgid "_Open Link"
msgstr "開啟連結(_O)"
-#: ../shell/ev-window.c:4569
+#: ../shell/ev-window.c:5331
msgid "_Go To"
-msgstr "前往(_G)"
+msgstr "移至(_G)"
-#: ../shell/ev-window.c:4571
+#: ../shell/ev-window.c:5333
msgid "Open in New _Window"
-msgstr "在新視窗中開啟(_W)"
+msgstr "在新的視窗中開啟(_W)"
-#: ../shell/ev-window.c:4573
+#: ../shell/ev-window.c:5335
msgid "_Copy Link Address"
-msgstr "複製連結地址(_C)"
+msgstr "複製連結位址(_C)"
-#: ../shell/ev-window.c:4575
-msgid "_Save Image As..."
-msgstr "å\8f¦å\84²å\9c\96ç\89\87(_S)..."
+#: ../shell/ev-window.c:5337
+msgid "_Save Image As…"
+msgstr "å\8f¦å\98å\9c\96ç\89\87(_S)â\80¦"
-#: ../shell/ev-window.c:4577
+#: ../shell/ev-window.c:5339
msgid "Copy _Image"
msgstr "複製圖片(_I)"
-#: ../shell/ev-window.c:4616
-msgid "Page"
-msgstr "é \81次"
+#: ../shell/ev-window.c:5344
+msgid "_Open Attachment"
+msgstr "é\96\8bå\95\9fé\99\84件(_O)"
-#: ../shell/ev-window.c:4617
-msgid "Select Page"
-msgstr "選擇頁次"
+#: ../shell/ev-window.c:5346
+msgid "_Save Attachment As…"
+msgstr "另存附件為(_S)…"
-#: ../shell/ev-window.c:4628
+#: ../shell/ev-window.c:5407
msgid "Zoom"
msgstr "縮放"
-#: ../shell/ev-window.c:4630
+#: ../shell/ev-window.c:5409
msgid "Adjust the zoom level"
msgstr "調整縮放等級"
-#: ../shell/ev-window.c:4640
+#: ../shell/ev-window.c:5419
msgid "Navigation"
msgstr "導航"
-#: ../shell/ev-window.c:4642
+#: ../shell/ev-window.c:5421
msgid "Back"
msgstr "後退"
#. translators: this is the history action
-#: ../shell/ev-window.c:4645
+#: ../shell/ev-window.c:5424
msgid "Move across visited pages"
msgstr "在已閱讀的頁面間移動"
#. translators: this is the label for toolbar button
-#: ../shell/ev-window.c:4675
+#: ../shell/ev-window.c:5454
msgid "Previous"
msgstr "上一頁"
#. translators: this is the label for toolbar button
-#: ../shell/ev-window.c:4680
+#: ../shell/ev-window.c:5459
msgid "Next"
msgstr "下一頁"
#. translators: this is the label for toolbar button
-#: ../shell/ev-window.c:4684
+#: ../shell/ev-window.c:5463
msgid "Zoom In"
msgstr "拉近"
#. translators: this is the label for toolbar button
-#: ../shell/ev-window.c:4688
+#: ../shell/ev-window.c:5467
msgid "Zoom Out"
msgstr "拉遠"
#. translators: this is the label for toolbar button
-#: ../shell/ev-window.c:4696
+#: ../shell/ev-window.c:5475
msgid "Fit Width"
msgstr "符合頁寬"
-#: ../shell/ev-window.c:4912
+#: ../shell/ev-window.c:5636 ../shell/ev-window.c:5653
+msgid "Unable to launch external application."
+msgstr "無法啟動外部應用程式。"
+
+#: ../shell/ev-window.c:5710
msgid "Unable to open external link"
msgstr "無法開啟外部連結"
-#: ../shell/ev-window.c:5068
+#: ../shell/ev-window.c:5877
msgid "Couldn't find appropriate format to save image"
msgstr "找不到合適的格式來儲存圖片"
-#: ../shell/ev-window.c:5108
+#: ../shell/ev-window.c:5919
msgid "The image could not be saved."
msgstr "圖片無法儲存。"
-#: ../shell/ev-window.c:5140
+#: ../shell/ev-window.c:5951
msgid "Save Image"
msgstr "儲存圖片"
-#: ../shell/ev-window.c:5202
+#: ../shell/ev-window.c:6018
msgid "Unable to open attachment"
msgstr "無法開啟附件"
-#: ../shell/ev-window.c:5254
+#: ../shell/ev-window.c:6071
msgid "The attachment could not be saved."
msgstr "附件無法儲存。"
-#: ../shell/ev-window.c:5299
+#: ../shell/ev-window.c:6116
msgid "Save Attachment"
msgstr "儲存附件"
-#: ../shell/ev-window-title.c:145
+#: ../shell/ev-window-title.c:162
#, c-format
-msgid "%s - Password Required"
-msgstr "%s - 需要密碼"
+msgid "%s — Password Required"
+msgstr "%s — 需要密碼"
-#: ../shell/ev-utils.c:330
+#: ../shell/ev-utils.c:318
msgid "By extension"
msgstr "依延伸檔名"
-#: ../shell/main.c:52
-msgid "The page of the document to display."
-msgstr "要顯示的文件頁次。"
+#: ../shell/main.c:72 ../shell/main.c:277
+msgid "GNOME Document Viewer"
+msgstr "GNOME 文件檢視器"
-#: ../shell/main.c:52
+#: ../shell/main.c:80
+msgid "The page label of the document to display."
+msgstr "要顯示的文件頁面標籤。"
+
+#: ../shell/main.c:80
msgid "PAGE"
msgstr "頁次"
-#: ../shell/main.c:53
+#: ../shell/main.c:81
+msgid "The page number of the document to display."
+msgstr "要顯示的文件頁碼。"
+
+#: ../shell/main.c:81
+msgid "NUMBER"
+msgstr "編號"
+
+#: ../shell/main.c:82
msgid "Run evince in fullscreen mode"
msgstr "以全螢幕模式執行 evince"
-#: ../shell/main.c:54
+#: ../shell/main.c:83
msgid "Run evince in presentation mode"
msgstr "以簡報模式執行 evince"
-#: ../shell/main.c:55
+#: ../shell/main.c:84
msgid "Run evince as a previewer"
msgstr "以 evince 作為預覽程式"
-#: ../shell/main.c:56
+#: ../shell/main.c:85
msgid "The word or phrase to find in the document"
msgstr "要在文件中尋找的字或詞"
-#: ../shell/main.c:56
+#: ../shell/main.c:85
msgid "STRING"
-msgstr "STRING"
+msgstr "字串"
-#: ../shell/main.c:59
-msgid "[FILE...]"
+#: ../shell/main.c:89
+msgid "[FILE…]"
msgstr "[檔案...]"
-#: ../shell/main.c:325
-msgid "GNOME Document Viewer"
-msgstr "GNOME 文件檢視器"
-
#: ../thumbnailer/evince-thumbnailer.schemas.in.h:1
msgid ""
-"Boolean options available, true enables thumbnailing and false disables the "
+"Boolean options available: true enables thumbnailing and false disables the "
"creation of new thumbnails"
-msgstr "可用的布林選項ä¸ï¼\8câ\80\9ctrueâ\80\9dé\96\8bå\95\9f縮å\9c\96å\8a\9fè\83½ï¼\8cè\80\8câ\80\9cfalseâ\80\9då\81\9cæ¢å»ºæ§\8bæ\96°ç\9a\84縮å\9c\96"
+msgstr "可用的布林選項ï¼\9aâ\80\9ctrueâ\80\9dæ\9c\83é\96\8bå\95\9f縮å\9c\96å\8a\9fè\83½ï¼\8cè\80\8câ\80\9cfalseâ\80\9dæ\9c\83å\81\9cæ¢å»ºç«\8bæ\96°ç\9a\84縮å\9c\96"
#: ../thumbnailer/evince-thumbnailer.schemas.in.h:2
msgid "Enable thumbnailing of PDF Documents"
#: ../thumbnailer/evince-thumbnailer.schemas.in.h:4
msgid ""
-"Valid command plus arguments for the PDF Document thumbnailer. See nautilus "
+"Valid command plus arguments for the PDF Document thumbnailer. See Nautilus "
"thumbnailer documentation for more information."
msgstr ""
-"正確的指令加上代表 PDF 文件縮圖的選項。請參見 nautilus 縮圖文件以得到更多資"
+"正確的指令加上代表 PDF 文件縮圖的引數。請參見 Nautilus 縮圖文件以得到更多資"
"訊。"
+#~ msgid "Page Set_up…"
+#~ msgstr "頁面設定(_U)…"
+
+#~ msgid "Set up the page settings for printing"
+#~ msgstr "設定列印用的頁面設定"
+
+#~ msgid "DJVU document has incorrect format"
+#~ msgstr "DJVU 文件有不正確的格式"
+
+#~ msgid "Failed to create file “%s”: %s"
+#~ msgstr "無法建立檔案“%s”：%s"
+
+#~ msgid "Search string"
+#~ msgstr "搜尋字串"
+
+#~ msgid "The name of the string to be found"
+#~ msgstr "欲搜尋的字串名稱"
+
+#~ msgid "Case sensitive"
+#~ msgstr "區分大小寫"
+
+#~ msgid "TRUE for a case sensitive search"
+#~ msgstr "TRUE 代表區分大小寫的搜尋"
+
+#~ msgid "Highlight color"
+#~ msgstr "標示顏色"
+
+#~ msgid "Color of highlight for all matches"
+#~ msgstr "用來標示所有符合字串的顏色"
+
+#~ msgid "Current color"
+#~ msgstr "目前的顏色"
+
+#~ msgid "Color of highlight for the current match"
+#~ msgstr "用來標示目前符合字串的顏色"
+
+#~ msgid "Recover previous documents?"
+#~ msgstr "是否復原前一份文件？"
+
+#~ msgid ""
+#~ "Evince appears to have exited unexpectedly the last time it was run. You "
+#~ "can recover the opened documents."
+#~ msgstr "Evince 在上次執行時似乎突然關閉了。您可以復原已開啟的文件。"
+
+#~ msgid "_Don't Recover"
+#~ msgstr "不要復原(_D)"
+
+#~ msgid "_Recover"
+#~ msgstr "復原(_R)"
+
+#~ msgid "Crash Recovery"
+#~ msgstr "當機後復原"
+
+#~ msgid "Print..."
+#~ msgstr "列印..."
+
+#~ msgid "Couldn't create symlink “%s”: "
+#~ msgstr "無法建立符號連結「%s」："
+
+#~ msgid "Cannot open a copy."
+#~ msgstr "無法開啟副本。"
+
+#~ msgid "_Save a Copy..."
+#~ msgstr "儲存副本(_S)..."
+
+#~ msgid "_Print..."
+#~ msgstr "列印(_P)..."
+
+#~ msgid "_Find..."
+#~ msgstr "尋找(_F)..."
+
+#~ msgid "Co_nnect"
+#~ msgstr "連線(_N)"
+
+#~ msgid "Connect _anonymously"
+#~ msgstr "匿名連線(_A)"
+
+#~ msgid "Connect as u_ser:"
+#~ msgstr "以使用者連線(_S):"
+
+#~ msgid "_Username:"
+#~ msgstr "使用者名稱(_U):"
+
+#~ msgid "_Domain:"
+#~ msgstr "網域(_D):"
+
+#~ msgid "_Forget password immediately"
+#~ msgstr "立刻忘掉密碼(_F) "
+
+#~ msgid "_Remember password until you logout"
+#~ msgstr "在您登出前記住密碼(_R)"
+
+#~ msgid "_Remember forever"
+#~ msgstr "永遠記住(_R)"
+
+#~ msgid "File not available"
+#~ msgstr "檔案不存在"
+
+#~ msgid "Remote files aren't supported"
+#~ msgstr "不支援遠端檔案"
+
+#~ msgid "Find Previous"
+#~ msgstr "找上一個"
+
+#~ msgid "Find Next"
+#~ msgstr "找下一個"
+
+#~ msgid "Password Entry"
+#~ msgstr "密碼輸入欄"
+
+#~ msgid "Remember password for this session"
+#~ msgstr "在此作業階段中記住密碼"
+
+#~ msgid "Save password in keyring"
+#~ msgstr "儲存密碼於鑰匙圈程式中"
+
+#~ msgid "<b>Title:</b>"
+#~ msgstr "<b>標題：</b>"
+
+#~ msgid "%.2f x %.2f in"
+#~ msgstr "%.2f x %.2f 寸"
+
+#~ msgid "Incorrect password"
+#~ msgstr "密碼不正確"
+
#~ msgid "Evince Document Viewer"
#~ msgstr "Evince 文件檢視器"
#~ msgstr "Legal"
#~ msgid "Statement"
-#~ msgstr "Statement"
+#~ msgstr "陳述"
#~ msgid "Executive"
#~ msgstr "Executive"
#~ msgstr "開啟“%s”"
#~ msgid "Empty"
-#~ msgstr "空ç\99½"
+#~ msgstr "空ç\9a\84"
#~ msgid "75%"
#~ msgstr "75%"
https://www.fi.muni.cz/~kas/git / evince.git / blobdiff