X-Git-Url: https://www.fi.muni.cz/~kas/git//home/kas/public_html/git/?p=bike-lights.git;a=blobdiff_plain;f=firmware%2Fmain.c;h=e6f03b01fafa1156aeb86cc01cb7da7eabc62f1c;hp=02e75d9adfdc868d53aceede6cc9c0cd00f82f1d;hb=6ce11e298f73e160555e2bf4dd3d88f120fbdebd;hpb=47e678a90062fa2dbc6cb8f9e5efc81072f5dcc5

diff --git a/firmware/main.c b/firmware/main.c
index 02e75d9..e6f03b0 100644
--- a/firmware/main.c
+++ b/firmware/main.c
@@ -9,99 +9,107 @@
 
 static void hw_setup()
 {
-	wdt_enable(WDTO_1S);
 	init_battery();
 	init_pwm();
 	init_adc();
 	init_tmr();
 	init_buttons();
 
-	pwmled_init();
-	gpio_init();
-	ambient_init();
-	pattern_init();
+	init_pwmled();
+	init_gpio();
+	init_ambient();
+	init_pattern();
+	init_control();
 
 	set_sleep_mode(SLEEP_MODE_IDLE);
 }
 
-static void hw_suspend()
+static void inline hw_suspend()
 {
 	susp_pwm();
 	susp_adc();
 	susp_tmr();
 	susp_gpio();
-	wdt_disable();
+	susp_ambient();
+	susp_buttons();
 }
 
-
-void power_down()
+void power_down(unsigned char err)
 {
-	uint16_t wake_count = 0;
-	unsigned char btn;
-
 	hw_suspend();
-sleep_again:
-	// enable PCINT14, so that user can wake up later
-        GIMSK |= _BV(PCIE1);
-        PCMSK1 |= _BV(PCINT14);
-
-	// G'night
-        set_sleep_mode(SLEEP_MODE_PWR_DOWN);
-        sleep_enable();
-        sleep_bod_disable();
-        sei();
-        sleep_cpu();
-
-	// G'morning
-	cli();
 
-        sleep_disable();
+	do {
+		if (err)
+			gpio_set(0, 1);
 
-	// Disable PCINT14
-	GIMSK &= ~_BV(PCIE1);
-	PCMSK1 &= ~_BV(PCINT14);
+		// G'night
+		set_sleep_mode(SLEEP_MODE_PWR_DOWN);
+		sleep_enable();
+		sleep_bod_disable();
+		sei();
+		sleep_cpu();
 
-        // allow wakeup by long button-press only
-        for (btn = 0; btn < 5; btn++) {
-                if ((PINB & _BV(PB6)) != 0) {
-                        wake_count++;
-                        goto sleep_again;;
-                }
-                _delay_ms(100);
-        }
+		// G'morning
+		cli();
+		sleep_disable();
 
-	// ok, so I will wake up
-	log_byte(0xb1);
-	log_word(wake_count);
-	log_flush();
+		// allow wakeup by long button-press only
+	} while (!buttons_wait_for_release());
 
+	// ok, so I will wake up
 	hw_setup();
 }
 
-
-ISR(PCINT_vect)
+static void inline first_boot()
 {
-	GIMSK &= ~_BV(PCIE1);
-	PCMSK1 &= ~_BV(PCINT14);
-}
+	unsigned char mcusr_save;
+
+	// disable the WDT if running
+	wdt_reset();
+	mcusr_save = MCUSR;
+	MCUSR = 0;
+	wdt_disable();
+
+	if (mcusr_save & _BV(WDRF)) // was watchdog reset?
+		gpio_set(0, 1);
+
+	init_log(mcusr_save);
 
-int main(void)
-{
-	log_init();
 	power_usi_disable(); // Once for lifetime
+	ACSRA |= _BV(ACD);   // disable analog comparator
 
 	log_set_state(3);
 
 	hw_setup();
-	power_down();
+	power_down(mcusr_save & _BV(WDRF));
 
 	sei();
-#if 1
-	while (1) {
-		wdt_reset();
-		sleep_mode();
+}
+
+static void inline main_loop_iteration()
+{
+	cli();
+	if (TIMER1_IS_ON()) {
+		set_sleep_mode(SLEEP_MODE_IDLE);
+	} else if (adc_is_on) {
+		set_sleep_mode(SLEEP_MODE_ADC);
+	} else {
+		set_sleep_mode(SLEEP_MODE_PWR_DOWN);
 	}
-#endif
+
+	sleep_enable();
+	// keep BOD active, no sleep_bod_disable();
+	sei();
+	sleep_cpu();
+	sleep_disable();
+}
+
+int main(void)
+{
+	first_boot();
+
+	while (1)
+		main_loop_iteration();
 
 #if 0
 	DDRB |= _BV(PB2);