<page xmlns="http://projectmallard.org/1.0/"
- type="topic" style="task"
+ type="guide" style="task"
id="annotations-properties">
<info>
- <link type="guide" xref="index#annotations"/>
- <desc>You can customise the author, colour, style or icon of an annotation.</desc>
+ <link type="guide" xref="annotations"/>
+ <desc>How to customize the author, color, style or icon of an annotation.</desc>
<revision pkgversion="2.33.0" version="0.1" date="2010-10-02" status="review"/>
<credit type="author">
</info>
- <title>Customise an Annotation</title>
+ <title>Customize Annotations</title>
<steps>
<item>
</item>
<item>
<p>
- Select <gui>Annotation Properties...</gui>
+ Select <gui>Annotation Properties.</gui>
</p>
</item>
<item>
<section>
<title>Can I permanently change the default annotation properties?</title>
<p>
- The default annotation properties (author, colour, style and icon) can only be changed on a particular note as stated <link xref="annotations#properties">above</link>. So if you want all icons for your notes to be <gui>red</gui> instead of <gui>yellow</gui>, you will have to change the default from <gui>yellow</gui> to <gui>red</gui> individually on each note. There is no way to save different default settings for annotation properties, at this time.
+ The default annotation properties (author, colour, style and icon) can only be changed on a particular note as stated above. So if you want all icons for your notes to be <gui>red</gui> instead of <gui>yellow</gui>, you will have to change the default from <gui>yellow</gui> to <gui>red</gui> individually on each note. There is no way to save different default settings for annotation properties, at this time.
</p>
<info>
<link type="guide" xref="index#annotations"/>
- <desc>You can not remove an annotation in <app>Evince Document Viewer</app>.</desc>
+ <desc>You can not remove annotations.</desc>
- <revision pkgversion="2.33.0" version="0.1" date="2010-10-02" status="review"/>
+ <revision pkgversion="2.32.3" version="0.1" date="2010-09-28" status="review"/>
<credit type="author">
<name>Tiffany Antopolski</name>
<email>tiffany@antopolski.com</email>
</info>
- <title>How can I remove an annotation?</title>
+ <title>Removing Annotations</title>
<p>
- You can not remove an annotation in <app>Evince Document Viewer at this time.</app>
+ You can not remove an annotation in <app>Evince</app> at this time.
</p>
</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="annotations-disabled">
+<info>
+ <link type="guide" xref="index#annotations"/>
+ <link type="seealso" xref="annotations"/>
+ <desc>Annotations can only be added to PDF files.</desc>
+
+ <revision pkgversion="2.32.3" version="0.1" date="2010-09-28" status="review"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+</info>
+<title>Can't Add Annotations?</title>
+ <p>
+ Annotations can only be added to PDF files. If your file is of a format other than PDF, the option to add annotations will be greyed out (disabled).
+ </p>
+</page>
<info>
<link type="guide" xref="index#annotations"/>
- <desc>You can navigate to annotations.</desc>
+ <desc>How to navigate to annotations.</desc>
<revision pkgversion="2.33.0" version="0.1" date="2010-10-02" status="review"/>
<credit type="author">
</p>
<media type="image" src="annotations-navigate.png"/>
<p>
- To quickly navigate to the location of a particular annotation, click on the arrow to the left of the page number. You will see a list of annotations on that page. Click on the annotation you are interested in, and <app>Evince Document Viewer</app> will navigate to the location of the annotation in the document.
+ To quickly navigate to the location of a particular annotation, click on the arrow to the left of the page number. You will see a list of annotations on that page. Click on the annotation you are interested in, and <app>Evince</app> will navigate to the location of the annotation in the document.
</p>
<media type="image" src="annotations-nav-to-page.png"/>
</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="annotations-save">
+<info>
+ <link type="guide" xref="index#annotations"/>
+ <desc>How to save your annotations.</desc>
+
+ <revision pkgversion="2.32.3" version="0.1" date="2010-09-28" status="review"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+</info>
+<title>Save a Copy of an Annotated PDF</title>
+ <p>
+ To save a copy of your annotated PDF for future viewing using <app>Evince</app> or any other document viewer <em>that supports annotations</em>:
+ </p>
+ <steps>
+ <item>
+ <p>
+ <guiseq><gui>File</gui><gui>Save a copy</gui></guiseq>
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose a name and folder to save the file in, then click <gui>Save</gui>.
+ The PDF will be saved in the folder you chose.
+ </p>
+ </item>
+ </steps>
+ <p>
+ Annotations are added according to the PDF specification. Therefore, most PDF readers should be able to read them. <app>Okular</app> Document Viewer does not support them. Adobe Reader is known to work.
+ </p>
+
+</page>
<page xmlns="http://projectmallard.org/1.0/"
- type="topic" style="task"
+ type="guide" style="task"
id="annotations">
<info>
<link type="guide" xref="index#annotations"/>
- <desc>Creating Annotations in <app>Evince Document Viewer</app>.</desc>
+ <desc>How to create and customize annotations.</desc>
<revision pkgversion="2.33.0" version="0.1" date="2010-09-28" status="review"/>
<credit type="author">
</info>
-<title>Adding an Annotation</title>
-
+<title>Adding Annotations</title>
<p>
- When you open a file in <app>Evince Document Viewer</app> you should have a side pane on the left side of the window. If you do not have a visible side pane, click <guiseq><gui>View</gui><gui>Side Pane</gui></guiseq> or press <key>F9</key>.
+ An annotation is a note or comment added to a PDF document. You can add annotations using <app>Evince</app>.
</p>
-
<p>
- At the top of this side pane, there is a drop-down menu with the following options (some of which may be <em>dimmed</em> for some documents):
+ When you open a file, you should have a side pane on the left side of the window. If you do not have a visible side pane, click <guiseq><gui>View</gui><gui>Side Pane</gui></guiseq> or press <key>F9</key>.
</p>
- <list>
- <item>
- <p>
- <gui>Thumbnails</gui>
- </p>
- </item>
- <item>
- <p>
- <gui>Index</gui>
- </p>
- </item>
- <item>
- <p>
- <gui>Attachments</gui>
- </p>
- </item>
- <item>
- <p>
- <gui>Layers</gui>
- </p>
- </item>
- <item>
- <p>
- <gui>Annotations</gui>
- </p>
- </item>
- </list>
+<p>
+ At the top of this side pane, there is a drop-down menu with options like <gui>Thumbnails</gui>, <gui>Index</gui> and <gui>Annotations</gui> (some of which may be <em>dimmed</em> for some documents):
+</p>
<p>
To create an annotation:
</p>
id="bookmarks">
<info>
- <link type="guide" xref="index#other"/>
- <desc>Can I create bookmarks in <app>Evince Document Viewer</app>?</desc>
+ <link type="guide" xref="index#annotations"/>
+ <desc>You can use annotations like bookmarks.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-09-28" status="review"/>
<credit type="author">
<title>Bookmarks</title>
<p>
- <app> Evince Document Viewer </app> does not have a bookmark system. However, you can use <link xref = "annotations">annotations</link> like bookmarks.
+ <app>Evince</app> does not have a bookmark system. However, you can use <link xref = "annotations">annotations</link> like bookmarks.
</p>
</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="bugs">
+
+ <info>
+ <link type="guide" xref="index#getInvolved"/>
+ <desc>How and where to report problems.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-11-17" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+ </info>
+
+<title>File a Bug Against <app>Evince</app></title>
+<p>
+ To file a bug against <app>Evince</app>, click on the link <link href = "https://bugzilla.gnome.org/"/>.
+ </p>
+ <p>
+ This is a bug tracking system where users and developers can file details about bugs, crashes and request enhancements.
+ </p>
+ <p>
+ To participate you need an account which will give you the ability to gain access, file bugs, and make comments. If you don't already have an account, just click on the "New" link to create one.
+ </p>
+ <p>
+ Once you have an account, log in, click on <guiseq><gui>Fila a Bug</gui><gui>Desktop</gui><gui>evince</gui></guiseq>.
+ Before reporting a bug, please read the <link href = "https://bugzilla.gnome.org/page.cgi?id=bug-writing.html">bug writing guidelines</link>, and please <link href="https://bugzilla.gnome.org/browse.cgi?product=evince">browse</link> for the bug to see if it already exists.
+ </p>
+ <p>
+ To file your bug, choose the component in the <gui>Component</gui> menu. If you are not sure which component your bug pertains to, choose <gui>general</gui>.
+ </p>
+ <p>
+ If you are requesting an enhancement, choose <gui>enhancement</gui> in the <gui>Severity</gui> menu.
+ Fill in the Summary and Description sections and click <gui>Commit</gui>.
+ </p>
+ <p>
+ Your report will be given an ID number, and it's status will be updated as it is being dealt with.
+ </p>
+</page>
id="commandline">
<info>
- <link type="guide" xref="index#other"/>
- <desc>The Document Viewer can be started with the <cmd>evince</cmd> command.</desc>
-
+ <link type="guide" xref="index#advanced"/>
+ <title type="sort">Command Line</title>
+ <desc>The <cmd>evince</cmd> command can open any number of files, at specific pages and in various modes.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<credit type="author">
<name>Phil Bull</name>
<email>philbull@gmail.com</email>
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
-<title>Opening The Document Viewer From The Command Line</title>
+<title>The Command Line</title>
<p>
-To start the Document Viewer from the command line, type <cmd>evince</cmd>. You
+To start the Document Viewer from the command line, type <cmd>evince</cmd>. You
can open a specific file by typing the filename after the evince command:
</p>
<section>
<title>Opening A Document At A Specific Page</title>
<p>
- You can use the <cmd>--page-label</cmd> switch to open a document at a
+ You can use the <cmd>--page-label</cmd> switch to open a document at a
specific page. For example, to open a document to page 3, you would type:
</p>
<screen>evince --page-label=3</screen>
<p>
- The page label should be in the same format as the page number displayed in
+ The page label should be in the same format as the page number displayed in
the Document Viewer toolbar.
</p>
</section>
id="convertPostScript">
<info>
- <link type="guide" xref="index#other"/>
- <link type="guide" xref="tips"/>
+ <link type="guide" xref="index#tips"/>
<desc>You can convert a document to PostScript.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<title>Converting A Document To PostScript</title>
<p>
-You can convert documents of the following format types to PostScript files:
+You can convert documents of the following format types to PostScript files:
</p>
<list>
<item><p>DjVu (.djvu, .djv)</p></item>
<item><p>Tagged Image File Format (.tiff, .tif)</p></item>
</list>
<p>
-This works by opening the file in Document Viewer and "printing" the document as a PostScript file.
+This works by opening the file in Document Viewer and "printing" the document as a PostScript file.
</p>
<steps>
<item>
<p>
- Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> and go to the
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> and go to the
<gui>General</gui> tab.
</p>
</item>
<item>
<p>
- Select <gui>Print to File</gui> and choose PostScript as the
+ Select <gui>Print to File</gui> and choose PostScript as the
<gui>Output format</gui>.
</p>
</item>
<item>
<p>
- Choose a name and folder to save the file in, then click <gui>Print</gui>.
+ Choose a name and folder to save the file in, then click <gui>Print</gui>.
The PostScript file will be saved in the folder you chose.
</p>
</item>
id="convertSVG">
<info>
- <link type="guide" xref="index#other"/>
- <link type="guide" xref="tips"/>
+ <link type="guide" xref="index#tips"/>
<desc>You can convert a document to SVG by "printing" it to a file.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<title>Converting A Document To SVG</title>
<p>
-You can convert documents of the following format types to SVG files:
+You can convert documents of the following format types to SVG files:
</p>
<list>
<item><p>Portable Document Format (.pdf)</p></item>
</list>
<p>
-This works by opening the file in Document Viewer and "printing" the document as an SVG file.
+This works by opening the file in Document Viewer and "printing" the document as an SVG file.
</p>
<steps>
<item>
<p>
- Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> and go to the
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> and go to the
<gui>General</gui> tab.
</p>
</item>
<item>
<p>
- Select <gui>Print to File</gui> and choose SVG as the
+ Select <gui>Print to File</gui> and choose SVG as the
<gui>Output format</gui>.
</p>
</item>
<item>
<p>
- Choose a name and folder to save the file in, then click <gui>Print</gui>.
+ Choose a name and folder to save the file in, then click <gui>Print</gui>.
The SVG file will be saved in the folder you chose.
</p>
</item>
id="convertpdf">
<info>
- <link type="guide" xref="index#other"/>
- <link type="guide" xref="tips"/>
+ <link type="guide" xref="index#tips"/>
<desc>You can convert a document to PDF by "printing" it to a file.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<title>Converting A Document To PDF</title>
<p>
-You can convert documents of the following format types into PDF format:
+You can convert documents of the following format types into PDF format:
</p>
<list>
<item><p>Device Independent file format (.dvi)</p></item>
<item><p>PostScript (.ps)</p></item>
</list>
<p>
-This works by opening the file in Document Viewer and "printing" the document as a PDF file.
+This works by opening the file in Document Viewer and "printing" the document as a PDF file.
</p>
<steps>
<item>
<p>
- Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> and go to the
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> and go to the
<gui>General</gui> tab.
</p>
</item>
<item>
<p>
- Select <gui>Print to File</gui> and choose PDF as the
+ Select <gui>Print to File</gui> and choose PDF as the
<gui>Output format</gui>.
</p>
</item>
<item>
<p>
- Choose a name and folder to save the file in, then click <gui>Print</gui>.
+ Choose a name and folder to save the file in, then click <gui>Print</gui>.
The PDF will be saved in the folder you chose.
</p>
</item>
Note:
</p>
<p>
-You can't select text in PostScript or .dvi files, but you usually can do
-this in PDF files. Converting .dvi or PostScript files to PDF will not make
-the text selectable. This is because the text itself isn't stored in the file
-(it's just an image of what the text looks like), so there is no way to recover
-it and put it in the PDF. You can use <em>Optical Character Recognition</em>
+You can't select text in PostScript or .dvi files, but you usually can do
+this in PDF files. Converting .dvi or PostScript files to PDF will not make
+the text selectable. This is because the text itself isn't stored in the file
+(it's just an image of what the text looks like), so there is no way to recover
+it and put it in the PDF. You can use <em>Optical Character Recognition</em>
(OCR) software to extract the text from files if you need to.
</p>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-10page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+
+ <desc>Print a 10 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>10-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, select <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 10, 3, 4, 9, 8, 5, 6, 7, 2
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+
+
+ <item>
+ <p>
+ Once the pages have printed, take the paper with page 2 on it, place it back in the printer, taking care to orient it correctly (page 1 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em> select the <gui>Pages</gui> option and type: 1
+ </p>
+
+ </item>
+<item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+</steps>
+<note>
+ <p>
+ It is easier to print a 12-page booklet. You may wish to add 2 blank pages to your PDF document to make it 12-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF document 2-pages long using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank PDF with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-12page">12-page booklet</link>.
+ </p>
+ </item>
+</steps>
+</note>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-11page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+
+ <desc>Print a 11 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>11-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 11, 2, 1
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Type the numbers of the remaining pages in this order: 10, 3, 4, 9, 8, 5, 6, 7
+ </p>
+ </item>
+<item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+<note>
+ <p>
+ It is easier to print a 12-page booklet. You may wish to add a blank page to your PDF document to make it 12-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF document using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank PDF with your PDF document using <app>PDF-Shuffler</app> placing the blank page at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-12page">12-page booklet</link>.
+ </p>
+ </item>
+</steps>
+</note>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-12page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+
+ <desc>Print a 12 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>12-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 12, 1, 2, 11, 10, 3, 4, 9, 8, 5, 6, 7
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-13page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+
+ <desc>Print a 13 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>13-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+<p>
+ Under <em>Range</em>, select <gui>Pages</gui> and type: 1
+</p>
+
+ </item>
+
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+</p>
+<p>
+In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+<p>
+Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ <item>
+ <p>
+ Once the page has printed, take the paper and place it back in the printer, taking care to orient it correctly (page 2 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+<p>
+Choose the General tab.
+</p>
+<p>
+Under <em>Range</em>, select <gui>Pages</gui> and type: 2
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab and in the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+</p>
+<p>
+Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ To print page 3, Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+<p>
+In the <gui>General</gui> tab, enter 3 in the <gui>Pages</gui> selection.
+</p>
+<p>
+ In the <gui>Page Setup</gui> tab, set the <gui>Page ordering</gui> to <gui>Right to left</gui>.
+</p>
+<p>
+Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Once page 3 has printed, place the paper back in the printer (taking care to orient it correctly (pages 4 and 13 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+<p>
+In the <gui>General</gui> tab enter pages 4, 13 in the <gui>Pages</gui> selection menu.
+</p>
+<p>
+ In the <gui>Page Setup</gui> tab set <gui>Page ordering</gui> to <gui>Left to right</gui>.
+</p>
+<p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+ <p>
+Enter pages 8, 9, 10, 7, 6, 11, 12, 5 in the <gui>Pages</gui> selection menu and set <gui>Page ordering</gui> to <gui>Left to right</gui>.
+</p>
+ <p>
+Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+<note>
+ <p>
+ It is easier to print a 16-page booklet. You may wish to add 3 blank pages to your PDF document to make it 16-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF document 3-pages long using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank PDF with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-16page">16-page booklet</link>.
+ </p>
+ </item>
+</steps>
+</note>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-14page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+
+ <desc>Print a 14 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>14-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, select <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 14, 3, 4, 13, 12, 5, 6, 11, 10, 7, 8, 9, 2
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+
+
+ <item>
+ <p>
+ Once the pages have printed, take the paper with page 2 on it, place it back in the printer, taking care to orient it correctly (page 1 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em> select the <gui>Pages</gui> option and type: 1
+ </p>
+ </item>
+
+
+<item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+<note>
+ <p>
+ It is easier to print a 16-page booklet. You may wish to add 2 blank pages to your PDF document to make it 16-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF document 2-pages long using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank PDF with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-16page">16-page booklet</link>.
+ </p>
+ </item>
+</steps>
+</note>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-15page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+
+ <desc>Print a 15 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>15-Page Booklet</title>
+
+
+ <p>
+ It is easier to print a 16-page booklet. You may wish to add a blank page to your PDF document to make it 16-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank page with your PDF document using <app>PDF-Shuffler</app> placing the blank page at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-16page">16-page booklet</link>.
+ </p>
+
+ </item>
+</steps>
+
+
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-16page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+
+ <desc>Print a 4 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>16-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <tree>
+ <item>
+ Type the numbers of the pages in this order:
+ <item>16, 1, 2, 15, 14, 3, 4, 13, 12, 5, 6, 11, 10, 7, 8, 9</item>
+ </item>
+ </tree>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-3page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+ <title type="sort">03-Page Booklet</title>
+ <desc>Print a 3 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+
+<title>3-Page Booklet</title>
+
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>. Type the numbers of the pages in this order: 3, 2, 1
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+
+
+<note>
+ <p>
+ It is easier to print a 4-page booklet. You may wish to add a blank page to your PDF document to make it 4-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank page with your PDF document using <app>PDF-Shuffler</app> placing the blank page at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-4page">4-page booklet</link>.
+ </p>
+
+ </item>
+</steps>
+</note>
+
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-4page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+ <title type="sort">04-Page Booklet</title>
+ <desc>Print a 4 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" sstatus="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>4-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 4, 1, 2, 3
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-5page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+ <title type="sort">05-Page Booklet</title>
+ <desc>Print a 5 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" sstatus="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>5-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, select <gui>Pages</gui> and type: 1
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Once the page has printed, take the paper and place it back in the printer, taking care to orient it correctly (page 2 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+ <p>
+ Choose the General tab.
+ </p>
+ <p>
+ Under <em>Range</em>, select <gui>Pages</gui> and type: 2
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+<p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ <item>
+ <p>
+ To print page 3, click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+ <p>
+ In the <gui>General</gui> tab enter the page number in the <gui>Pages</gui> selection .
+ </p>
+ </item>
+ <item>
+ <p>
+In the <gui>Page Setup</gui> tab, set the <gui>Page ordering</gui> to <gui>Right to left</gui>.
+ </p>
+<p>
+ Click <gui>Print</gui>.
+</p>
+ </item>
+ <item>
+ <p>
+ Once page 3 has printed, place the paper back in the printer (taking care to orient it correctly (pages 4 and 9 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ <p>
+In the <gui>General</gui> tab enter pages 4, 9 in the <gui>Pages</gui> selection menu.
+ </p>
+ <p>
+In the <gui>Page Setup</gui> tab set <gui>Page ordering</gui> to <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+<note>
+ <p>
+ It is easier to print a 8-page booklet. You may wish to add 3 blank pages to your PDF document to make it 8-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF document 3-pages long using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank PDF with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-8page">8-page booklet</link>.
+ </p>
+ </item>
+</steps>
+</note>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-6page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+ <title type="sort">06-Page Booklet</title>
+ <desc>Print a 6 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>6-Page Booklet</title>
+<steps>
+
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, select <gui>Pages</gui>.
+ </p>
+<p>
+ Type the numbers of the pages in this order: 6, 3, 4, 5, 2
+ </p>
+
+ </item>
+
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+<p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+
+
+ <item>
+ <p>
+ Once the pages have printed, take the paper with page 2 on it, place it back in the printer, taking care to orient it correctly (page 1 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em> select the <gui>Pages</gui> option and type: 1
+ </p>
+ </item>
+
+
+<item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+</steps>
+<note>
+ <p>
+ It is easier to print a 8-page booklet. You may wish to add 2 blank pages to your PDF document to make it 8-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF document 2-pages long using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank PDF with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-8page">8-page booklet</link>.
+ </p>
+ </item>
+</steps>
+</note>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-7page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+ <title type="sort">07-Page Booklet</title>
+ <desc>Print a 7 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>7-Page Booklet</title>
+
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 7, 2, 1
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Type the numbers of the remaining pages in this order: 6, 3, 4, 5
+ </p>
+ </item>
+
+
+<item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, change the selection to <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+<note>
+ <p>
+ It is easier to print a 8-page booklet. You may wish to add a blank page to your PDF document to make it 8-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF document using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank PDF with your PDF document using <app>PDF-Shuffler</app> placing the blank page at the end..
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-8page">8-page booklet</link>.
+ </p>
+ </item>
+</steps>
+</note>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-8page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+ <title type="sort">08-Page Booklet</title>
+ <desc>Print an 8 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>8-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 8, 1, 2, 7, 6, 3, 4, 5
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+
+
+</steps>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-9page">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+ <title type="sort">09-Page Booklet</title>
+ <desc>Print a 9 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>9-Page Booklet</title>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, select <gui>Pages</gui> and type: 1
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Right to left</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Once the page has printed, take the paper and place it back in the printer, taking care to orient it correctly (page 2 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again and choose the General tab.
+ </p>
+ <p>
+ Under <em>Range</em>, select <gui>Pages</gui> and type: 2
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab and in the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> again.
+ </p>
+ <p>
+ In the <gui>General</gui> tab enter 3 in the <gui>Pages</gui> selection.
+ </p>
+ </item>
+
+ <item>
+ <p>
+
+ In the <gui>Page Setup</gui> tab, set the <gui>Page ordering</gui> to <gui>Right to left</gui>.
+ </p>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Once page 3 has printed, place the paper back in the printer (taking care to orient it correctly (pages 4 and 9 will be printed on the other side).
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ <p>
+ In the <gui>General</gui> tab enter pages 4,9 in the <gui>Pages</gui> selection menu.
+</p>
+<p>
+
+ In the <gui>Page Setup</gui> tab set <gui>Page ordering</gui> to <gui>Left to right</gui>.
+</p>
+<p>
+Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+</p>
+<p>
+Enter pages 8, 5, 6, 7 in the <gui>Pages</gui> selection menu and set <gui>Page ordering</gui> to <gui>Left to right</gui>.
+</p>
+<p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+<note>
+ <p>
+ It is easier to print a 12-page booklet. You may wish to add 3 blank pages to your PDF document to make it 12-pages. To do so, you can:
+ </p>
+<steps>
+ <item>
+ <p>
+ Create a blank PDF document 3-pages long using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank PDF with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+
+ </item>
+ <item>
+ <p>
+ Follow the steps for printing a <link xref="duplex-12page">12-page booklet</link>.
+ </p>
+ </item>
+</steps>
+</note>
+
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="duplex-npage">
+
+ <info>
+ <link type="guide" xref="print-booklet#doubleSided"/>
+
+ <desc>Print a booklet over 20 pages.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>n-Page Booklet</title>
+ <note style="important">
+ <p>
+ <em>n</em> is a multiple of 4.
+ </p>
+ </note>
+
+ <p>
+ If the number of pages in your PDF document is not a multiple of 4, you should add the appropriate number of blank pages (1,2 or 3) to make it a multiple of 4.
+ To do so, you can:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank pages with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+ </item>
+</steps>
+
+
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <tree>
+ <item>
+ Type the numbers of the pages in this order:
+ <item>n, 1, 2, n-1, n-2, 3, 4, n-3, n-4, 5, 6, n-5, n-6, 7, 8, n-7, n-8, 9, 10, n-9, n-10, 11, 12, n-11...</item>
+ <item>...until you have typed n-number of pages.</item>
+ </item>
+ </tree>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> option, select <gui>Short Edge (Flip)</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> option, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+</steps>
+</page>
id="editing">
<info>
- <link type="guide" xref="index#other"/>
- <link type="guide" xref="tips"/>
+ <link type="guide" xref="index#faq"/>
<desc>You can not use the <app>Evince Document Viewer</app> to edit files.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<title>Can I Edit Documents In The Document Viewer?</title>
-<note style="tip">
+
<p>
- The document viewer can not be used to make changes to documents. You need to use the appropriate editing application for the type of file you want to change.
+ <app>Evince</app> can not be used to make changes to documents. You need to use the appropriate editing application for the type of file you want to change.
</p>
-</note>
+
<note>
<p>
- PDF and PostScript (.ps) files are not usually intended to be edited, but PDF editing software is available. Try
+ PDF and PostScript (.ps) files are not usually intended to be edited, but PDF editing software is available. Try
<link href="http://pdfedit.petricek.net/en/index.html">pdfedit</link>, for example.
</p>
</note>
<info>
<link type="guide" xref="index#reading"/>
- <desc>Search for a given term on a page.</desc>
+ <desc>Find a word or phrase in a document.</desc>
- <revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
+ <revision pkgversion="2.32" version="0.1" date="2010-11-08" status="review"/>
<credit type="author">
<name>Phil Bull</name>
<email>philbull@gmail.com</email>
</info>
-<title>Finding Things In A Document</title>
+<title>Finding Text In A Document</title>
<steps>
- <item><p>Click <guiseq><gui>Edit</gui><gui>Find</gui></guiseq> or press
- <keyseq><key>Ctrl</key><key>F</key></keyseq> or <key>/</key> to display a
+ <item><p>Click <guiseq><gui>Edit</gui><gui>Find</gui></guiseq> or press
+ <keyseq><key>Ctrl</key><key>F</key></keyseq> or <key>/</key> to display a
search box. </p></item>
- <item><p>Type the word you want to look for and a search will start
+ <item><p>Type the word or phrase you want to look for and a search will start
automatically.</p></item>
- <item><p>The <gui>Find Previous</gui> and <gui>Find Next</gui> buttons let you skip from
+ <item><p>The <gui>Find Previous</gui> and <gui>Find Next</gui> buttons let you skip from
one search result to another.</p></item>
-
+
<item>
<p>To hide the search bar, click anywhere in the document.</p>
- <note style = "tip">
- <p>If the search bar says <em>0 found on this page</em>, and clicking the <gui>Find Next</gui> button has no effect, then your search word has not been
- found in the document.</p>
- </note>
- </item>
+ </item>
</steps>
+<p>
+If the word or phrase you searched does not appear in the entire document <app>Evince</app> will say <em>Not found</em>. However, if it appears in the document at least once, Evince will tell you how many times the word you searched occurs on each page. This is apparent if you skip from one result to another as described above or scroll through the document.
+</p>
-
-<note><p>Some documents are not searchable because the original text of the document has
- been converted into a different format. For example, many PostScript (.ps) files are not searchable.</p>
+<note>
+ <p>
+Only PDF documents are searchable. Some PDF documents are not searchable because their text
+is encoded in the document as an image.
+ </p>
</note>
</page>
<link type="seealso" xref="convertpdf"/>
<link type="seealso" xref="convertPostScript"/>
<link type="seealso" xref="convertSVG"/>
- <desc>PDF, PostScript and several other formats are supported.</desc>
+ <desc>PDF, PostScript and many others are.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<credit type="author">
<title>Supported Formats</title>
<p>
-The Document Viewer supports the following formats:
+<app>Evince</app> supports the following formats:
</p>
<list>
<item><p>Comic Book Archive (.cbr and .cbz)</p></item>
<item><p>Scalable Vector Graphics (.svg)</p></item>
<item><p>Tagged Image File Format (.tiff, .tif)</p></item>
<item><p>Other Image Files (.gif, .jpeg, .png)</p></item>
+</list>
+<note>
+<p>
+In some Linux distributions, not all formats are supported by default, so you might not be able to view all the formats listed above.
+</p>
+<p>
+Support for a format is called a <em>backend</em>. If <app>Evince</app> gives you the error "Unable to Open Document", you may wish to check whether the backend package for the format is installed.
+</p>
+</note>
-</list>
</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="forms-saving">
+
+ <info>
+ <link type="guide" xref="index#forms"/>
+ <desc>Make sure you save the
+ form, otherwise all of the information you entered will be
+ lost.</desc>
+
+ <revision pkgversion="2.32.0" version="0.1" date="2010-05-06" status="review"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+ </info>
+
+<title>Saving a Form</title>
+
+<p>
+ You may wish to save your form after you have filled it out in one of two ways:
+</p>
+
+<list type = "numbered">
+<item><p>
+ To save a copy that can be edited in the future (form remains interactive):
+ </p>
+ <steps>
+ <item>
+ <p>
+ <guiseq><gui>File</gui><gui>Save a copy</gui></guiseq>
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose a name and folder to save the file in, then click <gui>Save</gui>.
+ The PDF will be saved in the folder you chose.
+ </p>
+ </item>
+ </steps>
+</item>
+<item><p>
+ To save a copy that can no longer be edited (for example, to e-mail the form or submit it on-line):
+ </p>
+ <steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq> and go to the
+ <gui>General</gui> tab.
+ </p>
+ </item>
+ <item>
+ <p>
+ Select <gui>Print to File</gui> and choose PDF as the
+ <gui>Output format</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose a name and folder to save the file in, then click <gui>Print</gui>.
+ The PDF will be saved in the folder you chose.
+ </p>
+ </item>
+ </steps>
+</item>
+</list>
+
+<note style="bug">
+<p>
+ Copies of encrypted files can not be saved or printed.
+</p>
+</note>
+
+</page>
id="forms">
<info>
- <link type="guide" xref="index#other"/>
- <desc>Working with fillable forms in <app>Evince Document Viewer</app>.</desc>
+ <link type="guide" xref="index#forms"/>
+ <desc>Working with fillable forms in <app>Evince</app>.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-09-28" status="review"/>
<credit type="author">
</info>
<title>Forms</title>
+<p>
+ When filling out an interactive form, you can navigate from field to field by clicking on a field with your mouse. When you are finished filling out a text field, press <key>Enter</key>.
+</p>
+<p>
+ You can make a selection in scrollable list box by clicking on the list box and scrolling to your choice with your mouse.
+</p>
+<note style = "tip">
+ <p>
+There may be some parts of a form that you may need to fill out by hand <em>after</em> you print the form. For example, you might have to circle certain things, or sign the form in one or more places. If you wish to do this electronically, you may want to try <link href = "http://www.g-loaded.eu/2008/05/03/how-to-annotate-pdf-files-in-linux-using-xournal/">Xournal</link>.
+</p>
+</note>
</page>
<credit type="author">
<name>Phil Bull</name>
<email>philbull@gmail.com</email>
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
</credit>
-
<include href="legal.xml" xmlns="http://www.w3.org/2001/XInclude" />
</info>
<title>Reading Documents</title>
</section>
-<section id="pres" style="2column" groups="main">
+<section id="pres" style="2column">
<title>Presentations and Other Supported Formats</title>
</section>
-<section id="printing" style="2column" groups="main">
+<section id="printing" style="2column">
<title>Printing</title>
</section>
-<section id="annotations" style="2column" groups="main">
- <title>Annotations</title>
+<section id="annotations" style="2column">
+ <title>Annotations and Bookmarks</title>
+</section>
+
+<section id="forms" style="2column">
+ <title>Interactive Forms</title>
+</section>
+
+<section id="faq" style="2column" >
+ <title>Frequently Asked Questions</title>
+</section>
+
+<section id="advanced" style="2column">
+ <title>Advanced</title>
</section>
-<section id="problems" style="2column">
- <title>Problems and Common Questions</title>
+<section id="tips" style="2column">
+ <title>Tips and Tricks</title>
</section>
-<section id="other" style="2column">
- <title>Other Information</title>
+<section id="synctex" style="2column" groups="first second third fourth fifth sixth">
+ <title>SyncTex</title>
</section>
+<section id="getInvolved" style="2column" >
+ <title>Get Involved</title>
+</section>
</page>
id="invert-colors">
<info>
- <link type="guide" xref="index#other"/>
-
+ <link type="guide" xref="index#tips"/>
+
<desc>
Inverting the colors can make it easier to read some text.
</desc>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<title>Invert Colours On A Page</title>
-<list>
- <item>
- <p>
- Click <guiseq><gui>View</gui><gui>Inverted Colors</gui></guiseq>.
- </p>
- <note>
+
<p>
- This will swap black for white, white for black, and so on.
+ To swap black for white, white for black, and so on, click <guiseq><gui>View</gui><gui>Inverted Colors</gui></guiseq>.
</p>
- </note>
- </item>
-</list>
+
<note style="tip">
<p>
<info>
<link type="guide" xref="index#reading"/>
- <desc>Scrolling and navigating around a page.</desc>
+ <desc>Navigating, scrolling and zooming.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<credit type="author">
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
Right-click the page and select <gui>Autoscroll</gui>.
</p></item>
<item><p>
- Move the mouse pointer towards the bottom of the
- window to scroll down; it will scroll faster depending on how far down the
+ Move the mouse pointer towards the bottom of the
+ window to scroll down; it will scroll faster depending on how far down the
window you go.
</p></item>
<item><p>
<p>
Dragging the page around with your mouse, as if you are grabbing it. To do this:
</p>
-
+
<list>
<item>
<p>
<item><p><guiseq><gui>Go</gui><gui>Previous Page</gui></guiseq></p></item>
</list>
</item>
- <item><p>Press the <keyseq><key>Ctrl</key><key>Page Up</key></keyseq> or
+ <item><p>Press the <keyseq><key>Ctrl</key><key>Page Up</key></keyseq> or
<keyseq><key>Ctrl</key><key>Page Down</key></keyseq> buttons on the keyboard.</p></item>
<item><p>To go to a specific page:</p>
<list>
- <item><p>type a page number in the text box on the toolbar and press <key>Enter</key>. </p></item>
+ <item><p>Type a page number in the text box on the toolbar and press <key>Enter</key>. </p></item>
<item><p>If you want to go to the beginning or the end of the document:</p>
<list>
<item><p>Click <guiseq><gui>Go</gui><gui>First Page</gui></guiseq>. You can also press <keyseq><key>Ctrl</key><key>Home</key></keyseq> on your keyboard.</p></item>
- <item><p>Click <guiseq><gui>Go</gui><gui>Last Page</gui></guiseq> or Press <keyseq><key>Ctrl</key><key>End</key></keyseq> on your keyboard.</p></item>
+ <item><p>Click <guiseq><gui>Go</gui><gui>Last Page</gui></guiseq> or press <keyseq><key>Ctrl</key><key>End</key></keyseq> on your keyboard.</p></item>
</list></item>
</list></item>
<item><p>
- To move ten pages at a time, press
- <keyseq><key>Shift</key><key>Page Up</key></keyseq> or
+ To move ten pages at a time, press
+ <keyseq><key>Shift</key><key>Page Up</key></keyseq> or
<keyseq><key>Shift</key><key>Page Down</key></keyseq>.
</p>
<note style="tip"><p>
- You can only move around one page at a time, by default. If you want to move
- between pages just by scrolling or dragging, click
+ You can only move around one page at a time, by default. If you want to move
+ between pages just by scrolling or dragging, click
<guiseq><gui>View</gui><gui>Continuous</gui></guiseq>.
</p></note>
</item>
<section>
<title>Navigating With A Page List Or Table Of Contents</title>
- <p>To make the side pane visible:</p>
- <list>
- <item><p>Click <guiseq><gui>View</gui><gui>Side Pane</gui></guiseq> on the toolbar,
- or press <key>F9</key> on the keyboard. </p></item>
- <item><p>You should see a preview of all of the pages in
- the document.</p></item>
- </list>
+ <p>To make the side pane visible click <guiseq><gui>View</gui><gui>Side Pane</gui></guiseq> on the toolbar,
+ or press <key>F9</key> on the keyboard. You should see a preview of all of the pages in
+ the document.</p>
<p>You can move between pages by clicking on them in the side pane. </p>
-
+
<note>
<p>
- Some documents have an index or table of contents, which you can display in the
- side pane. Click the drop-down list at the top of the side pane and select
+ Some documents have an index or table of contents, which you can display in the
+ side pane. Click the drop-down list at the top of the side pane and select
<gui>Index</gui> to view it. </p>
- <note style = "tip"><p>Most documents don't use this feature, so you
+ <note style = "tip"><p>Most documents don't use this feature, so you
won't be able to view their index in the side pane.</p></note>
</note>
</section>
+<section>
+ <title>Zooming In and Out</title>
+ <list>
+ <item><p>Click <guiseq><gui>View</gui><gui>Zoom In</gui></guiseq> or use the keyboard shortcuts <keyseq><key>Ctrl</key><key>+</key></keyseq> to zoom in.</p></item>
+<item><p>Click <guiseq><gui>View</gui><gui>Zoom Out</gui></guiseq> or use the keyboard shortcuts <keyseq><key>Ctrl</key><key>-</key></keyseq> to zoom out.</p></item>
+</list>
+
+<p>Alternatively, you can do one of the following:</p>
+<list>
+ <item><p>hold down <key>Ctrl</key> and use your mouse scroll wheel to zoom.</p></item>
+ <item><p>select desired zoom percentage from the drop down menu above the window.</p>
+ <media type="image" src="zoom.png"/>
+ </item>
+</list>
+<note>
+<p>
+The <gui>Best Fit</gui> option will make a document page fit the whole <em>height</em> of the window. </p>
+<p>The <gui>Fit Page Width</gui> option will make a
+document page fill the whole <em>width</em> of the window.
+</p>
+<p>
+If you want to see two pages at once, side by side, like in a book, click
+<guiseq><gui>View</gui><gui>Dual</gui></guiseq>.
+</p>
+</note>
+<p>You can use the whole of your screen to view the document:</p>
+
+<list>
+ <item><p>Click <guiseq><gui>View</gui><gui>Fullscreen</gui></guiseq> or press <key>F11</key>. </p></item>
+ <item><p>To exit from the full screen mode:</p>
+ <list>
+ <item><p>Press <key>F11</key> or <key>Escape</key></p></item>
+ <item><p>or click the <gui>Leave Fullscreen</gui> button at the top of the screen.</p></item>
+ </list>
+ </item>
+</list>
+</section>
+
</page>
id="noprint">
<info>
- <link type="guide" xref="index#printing" group="main" />
+ <link type="guide" xref="index#printing"/>
<desc>The author may have put printing restrictions on the document.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<credit type="author">
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
-<title>Why Can't I Print A Document?</title>
+<title>I Can't Print A Document</title>
<p>A document might not print because of:</p>
<list>
<section>
<title>Printer Problems</title>
<p>
- There are many reasons why your printer might not be working. For example, it
+ There are many reasons why your printer might not be working. For example, it
could be out of paper or ink, or unplugged or damaged.
</p>
<p>To check if your printer is printing correctly:</p>
- <list>
+ <steps>
<item><p>Choose <guiseq><gui>System</gui><gui>Administration</gui><gui>Printing</gui></guiseq></p></item>
<item><p>Double click on your printer in the list.</p></item>
<item><p>Select <gui>Settings</gui> in the left menu. Click on <gui>Print Test Page</gui>. A page should be sent to your printer.</p>
<note>
<p>
-If this fails, see your printer's manual
+If this fails, see your printer's manual
to see what else you can do.
</p>
</note>
</item>
- </list>
-
+ </steps>
+
</section>
<section>
<title>PDF Printing Restrictions</title>
<p>
- Some PDF documents have a setting which prevents you from printing them.
+ Some PDF documents have a setting which prevents you from printing them.
Authors can set this printing restriction when they write a document.
- Evince overrides this restriction by default, but you may want to check
+ Evince overrides this restriction by default, but you may want to check
that it hasn't been disabled:
</p>
-
+
<steps>
<item>
<p>
- Press <keyseq><key>Alt</key><key>F2</key></keyseq> to open the Run
+ Press <keyseq><key>Alt</key><key>F2</key></keyseq> to open the Run
Application window.
</p>
</item>
<item>
<p>
- Type <input>gconf-editor</input> into the text box and click
+ Type <input>gconf-editor</input> into the text box and click
<gui>Run</gui>. The Configuration Editor will open.
</p>
</item>
id="openerror">
<info>
- <link type="guide" xref="index#reading"/>
- <desc>Why can't I open a file?</desc>
+ <link type="guide" xref="index#faq"/>
+ <desc>Error When Opening A File.</desc>
<link type="seealso" xref="formats"/>
</info>
-<title>Error When Opening A File</title>
+<title>Why can't I open a file?</title>
-<p>If you try to open a document of a format that <app>Evince Document Viewer</app> does not recognise, you will get an "Unable to open document" error message. Click <gui>Close</gui> to return to the Document Viewer window.
+<p>If you try to open a document of a format that <app>Evince</app> does not recognize, you will get an "Unable to open document" error message. Click <gui>Close</gui> to return to the Document Viewer window.
</p>
</page>
<info>
<link type="guide" xref="index#reading"/>
- <desc>How to open a document using Evince Document Viewer.</desc>
+ <desc>How to open a document using <app>Evince</app>.</desc>
<link type="seealso" xref="formats"/>
<link type="seealso" xref="commandline"/>
<title>Opening A Document</title>
- <p>You can open a document in <app>Evince Document Viewer</app> using the following ways:</p>
+ <p>You can open a document in <app>Evince</app> using the following ways:</p>
<list>
<item><p> Double-click on the file icon in the file manager or on the Desktop. </p>
<note style="tip"><p>
Double clicking opens PDF, PostScript, .djvu, .dvi and Comic Book Archive files in the Document Viewer by default.
- </p></note>
+ </p></note>
</item>
-
+
<item><p>Right-click on a file icon on the Desktop or in the file manager and click <guiseq><gui>Open With</gui><gui>Document Viewer</gui></guiseq>.</p>
</item>
</list>
<info>
<link type="guide" xref="index#reading"/>
- <desc>Handling PDF files which are password-protected.</desc>
+ <desc>Handling password protected PDFs.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<credit type="author">
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<p>If you try to open a PDF document that is protected with a password, a window will appear asking you to enter the document password. Enter the password and click <gui>Open Document</gui>.</p>
<p>There are two types of passwords:</p>
-
+
<list>
<item><p>The <em>user password</em> is needed to view the document.</p></item>
<item><p> The <em>master password</em> is required to print the document as well as view it.</p></item>
id="presentations">
<info>
- <link type="guide" xref="index#pres" group="main"/>
- <desc>You can play presentations with the Document Viewer.</desc>
+ <link type="guide" xref="index#pres"/>
+ <desc>You can play presentations with <app>Evince</app>.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<credit type="author">
</info>
<title>Presentations</title>
-<p>The <app>Document Viewer</app> can be used to display presentations. </p>
+<p>
+ <app>Evince</app> can be used to display presentations.
+</p>
<p>To start a presentation:</p>
<steps>
- <item><p> <link xref="opening">Open a file</link> </p></item>
- <item><p> Click <guiseq><gui>View</gui><gui>Presentation</gui></guiseq> (or press <key>F5</key>).</p>
-
-<p>
-The presentation will be displayed full screen.
-</p>
-</item>
+ <item>
+ <p><link xref="opening">Open a file</link></p>
+ </item>
+ <item>
+ <p> Click <guiseq><gui>View</gui><gui>Presentation</gui></guiseq> (or press <key>F5</key>).</p>
+ <p>
+ The presentation will be displayed full screen.
+ </p>
+ </item>
</steps>
-
<section>
-<title>Moving Through A Presentation</title>
-<p>Use the <key>spacebar</key>, right arrow key, down arrow key, or left mouse click to go to the next slide. </p>
-<p>Use the left arrow key, up arrow key or right mouse click to go to the previous slide. </p>
-<note style = "tip">
- <p>You can also use the scroll wheel to move back and forth through the presentation.</p>
-</note>
-<p>Use <key>Esc</key> to exit the presentation.</p>
+ <title>
+ Moving Through A Presentation
+ </title>
+ <p>
+ Use the <key>spacebar</key>, right arrow key, down arrow key, or left mouse click to go to the next slide.
+ </p>
+ <p>
+ Use the left arrow key, up arrow key or right mouse click to go to the previous slide.
+ </p>
+ <note style = "tip">
+ <p>
+ You can also use the scroll wheel to move back and forth through the presentation.
+ </p>
+ </note>
+ <p>
+ Use <key>Esc</key> to exit the presentation.
+ </p>
</section>
-
<p>
The following file formats can be used for presentations:
</p>
<item><p>PostScript (.ps)</p></item>
</list>
-
-
-
</page>
id="print-2sided">
<info>
- <link type="guide" xref="index#printing"/>
<link type="guide" xref="printing"/>
- <desc>Printing two-sided and multi-page per per sheet</desc>
+ <desc>Printing two-sided and multi-page per per sheet.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<credit type="author">
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<title>Two-Sided And Multiple Pages Per Side Layout For Printing</title>
<p>
-You can print on both sides of each sheet of paper:
+ You can print on both sides of each sheet of paper:
</p>
<steps>
- <item>
- <p>
- Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
- </p>
- </item>
- <item>
- <p>
- Go to the <gui>Page Setup</gui> tab of the Print window and choose an
- option from the <gui>Two-sided</gui> drop-down list.
- </p>
- </item>
- <item>
- <p>
- You can print more than one page of the document per <em>side</em> of
- paper too. Use the <gui>Pages per side</gui> option to do this.
- </p>
- </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Go to the <gui>Page Setup</gui> tab of the Print window and choose an option from the <gui>Two-sided</gui> drop-down list.
+ </p>
+ </item>
+ <item>
+ <p>
+ You can print more than one page of the document per <em>side</em> of paper too. Use the <gui>Pages per side</gui> option to do this.
+ </p>
+ </item>
</steps>
-<p>
- If you are printing a booklet (which will perhaps be bound or stapled in the middle of each page):
-</p>
-<steps>
- <item>
- <p>
- Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
- </p>
- </item>
- <item>
- <p>
- Choose the <gui>Page Setup</gui> tab.
- </p>
- </item>
- <item>
- <p>
- Under <em>Layout</em>, in the <gui>Pages per side</gui> menu, select <gui>2</gui>.
- </p>
- </item>
- <item>
- <p>
- In the <gui>Page ordering</gui> and <gui>Only print</gui> options, choose selections that will print the document in sach a way that the pages will be in the right order after binding.
- </p>
-<media type="image" src="print-2sided.png"/>
-<note>
- <p>
-You may need to use the <link xref="print-select"> Pages</link> option on the <gui>General</gui> tab too.
- </p>
-</note>
- </item>
-</steps>
-
-
-
-
</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="guide" style="task"
+ id="print-booklet">
+
+ <info>
+ <link type="guide" xref="index#printing"/>
+
+ <desc>How to print a booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>Printing a Booklet</title>
+
+<p>
+ If you are printing a booklet (which will perhaps be bound or stapled in the middle of each page), select the type of printer you will be using for printing from the list below. Then select the number of printed pages your booklet will have.
+</p>
+
+<section id="singleSided" style="2column">
+ <title>Printer Allows Single-Sided Printing</title>
+</section>
+
+<section id="doubleSided" style="2column">
+ <title>Printer Allows Double-Sided Printing</title>
+</section>
+
+
+
+</page>
id="print-differentsize">
<info>
- <link type="guide" xref="index#printing"/>
<link type="guide" xref="printing"/>
<desc>Printing a document on paper of a different size, shape or orientation.</desc>
<p>Creative Commons Share Alike 3.0</p>
</license>
</info>
+
<title>Changing The Paper Size When Printing</title>
<p>
-If you want to change the paper size of your document (for example, print a US Letter-sized PDF on A4 paper), you can
+ If you want to change the paper size of your document (for example, print a US Letter-sized PDF on A4 paper), you can
change the printing format for the document.
</p>
<steps>
<p>
You can also use the <em>Orientation</em> menu to choose a different orientation:
</p>
+
<list>
<item><p><gui>Portrait</gui></p></item>
<item><p><gui>Landscape</gui></p></item>
id="print-order">
<info>
- <link type="guide" xref="index#printing"/>
<link type="guide" xref="printing"/>
-
+
<desc>Use the Collate and Reverse options to make pages print in order.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<title>Getting Copies To Print In The Correct Order</title>
<section>
-<title>Reverse</title>
-<p>
-Printers usually print the first page first, and the last page last, so the
-pages end up in reverse order when you pick them up.
-</p>
-<p>
- To reverse the order:
-</p>
-<steps>
- <item><p><guiseq><gui>File</gui><gui>Print...</gui></guiseq></p></item>
- <item><p>In the <gui>General</gui> tab of the Print window under <em>Copies</em> check <gui>Reverse</gui>. The last page will be printed first, and so on.</p></item>
+ <title>
+ Reverse
+ </title>
+ <p>
+ Printers usually print the first page first, and the last page last, so the pages end up in reverse order when you pick them up.
+ </p>
+ <p>
+ To reverse the order:
+ </p>
+ <steps>
+ <item><p><guiseq><gui>File</gui><gui>Print</gui></guiseq></p></item>
+ <item><p>In the <gui>General</gui> tab of the Print window under <em>Copies</em> check <gui>Reverse</gui>. The last page will be printed first, and so on.</p></item>
</steps>
-
</section>
<section>
-<title>Collate</title>
-<p>
-If you are printing more than one copy of the document, the print outs will be grouped by page
-number by default. (e.g. The copies of page one come out, then the copies of page two, etc.) Collating will make each copy come out with
+ <title>
+ Collate
+ </title>
+ <p>
+ If you are printing more than one copy of the document, the print outs will be grouped by page number by default. (e.g. The copies of page one come out, then the copies of page two, etc.) Collating will make each copy come out with
its pages grouped together.
-</p>
-
-<p>
- To Collate:
-</p>
-<steps>
- <item><p><guiseq><gui>File</gui><gui>Print...</gui></guiseq></p></item>
- <item><p>In the <gui>General</gui> tab of the Print window under <em>Copies</em> check <gui>Collate</gui>. </p></item>
+ </p>
+
+ To Collate:
+ </p>
+ <steps>
+ <item><p>Click<guiseq><gui>File</gui><gui>Print</gui></guiseq></p></item>
+
<item><p>In the <gui>General</gui> tab of the Print window under <em>Copies</em> check <gui>Collate</gui>. </p></item>
</steps>
<media type="image" src="reverse-collate.png"/>
</section>
-
-
</page>
id="print-select">
<info>
- <link type="guide" xref="index#printing"/>
<link type="guide" xref="printing"/>
<desc>Print only specific pages, or only a range of pages.</desc>
<note>
-<p>
- <em>Example:</em>
+<p>
+ For example, if you enter "1,3,5-7,9" in the <gui>Pages</gui> textbox, pages 1,3,5,6,7 and 9 will be printed.
</p>
<media type="image" src="print-select.png"/>
- <list>
- <item>
- <p>
- Pages 1, 3, 5, 6, 7 and 9 will be printed.
- </p>
- </item>
- </list>
</note>
</page>
id="printing">
<info>
- <link type="guide" xref="index#printing" group="main" />
+ <link type="guide" xref="index#printing" />
<link type="seealso" xref="noprint"/>
-
+
<desc>How to print, and common questions about printing.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<item><p>Click <gui>Print</gui>.</p></item>
</steps>
</item>
-</list>
+</list>
<list>
<item>
id="reload">
<info>
- <link type="guide" xref="index#problems"/>
-
+ <link type="guide" xref="index#faq"/>
+
<desc>
- The Document Viewer automatically reloads your document if another program
+ <app>Evince</app> automatically reloads your document if another program
changes it while you're viewing it.
</desc>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<title>Why Does The Document Keep Reloading?</title>
<p>
-If the Document Viewer detects that the document you have open has changed
-(perhaps because another program has modified it), it will automatically reload
-the document and display the most recent version for you.
+ If the Document Viewer detects that the document you have open has changed (perhaps because another program has modified it), it will automatically reload the document and display the most recent version for you.
</p>
<p>
-If the document is deleted while you are still viewing it, it will remain open in the Document Viewer.
+ If the document is deleted while you are still viewing it, it will remain open in <app>Evince</app>.
</p>
</page>
id="shortcuts">
<info>
- <link type="guide" xref="index#other"/>
- <desc>All keyboard shortcuts listed, and how to create custome shortcuts.</desc>
+ <link type="guide" xref="index#advanced"/>
+ <desc>See a list of all shortcuts, and learn how to create your own custom shortcuts.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
<credit type="author">
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<td>Open a copy of the current document.</td> <td><keyseq><key>Ctrl</key><key>N</key></keyseq></td>
</tr>
<tr>
-
+
<td>Save a copy of the current document with a new file name.</td><td><keyseq><key>Ctrl</key><key>S</key></keyseq></td>
</tr>
<tr>
-
+
<td>Print the current document.</td><td><keyseq><key>Ctrl</key><key>P</key></keyseq></td>
</tr>
<tr>
-
+
<td>Close the current document window.</td><td><keyseq><key>Ctrl</key><key>W</key></keyseq></td>
</tr>
<tr>
-
+
<td>Reload the document (effectively closes and re-opens the document).</td><td><keyseq><key>Ctrl</key><key>R</key></keyseq></td>
</tr>
</table>
<title>Moving around the document</title>
<table frame = "all" rules = "cols" shade = "rows">
<tr>
-
+
<td>Move up/down a page.</td><td><key>Arrow</key> keys</td>
</tr>
<tr>
-
+
<td>Move up/down a page several lines at a time.</td><td><key>Page Up</key> / <key>Page Down</key></td>
</tr>
<tr>
-
+
<td>Go to the previous/next page.</td><td><keyseq><key>Ctrl</key><key>Page Up</key></keyseq> / <keyseq><key>Ctrl</key><key>Page Down</key></keyseq></td>
</tr>
<tr>
-
+
<td>Go to the beginning of a page (beginning of the document if <guiseq><gui>View</gui> <gui>Continuous</gui></guiseq> is selected).</td><td><key>Home</key></td>
</tr>
<tr>
-
+
<td>Go to the end of a page (end of the document if <guiseq><gui>View</gui><gui>Continuous</gui></guiseq> is selected).</td> <td><key>End</key></td>
</tr>
<tr>
-
+
<td>Go to the beginning of the document.</td><td><keyseq><key>Ctrl</key><key>Home</key></keyseq></td>
</tr>
<tr>
-
+
<td>Go to the end of the document.</td><td><keyseq><key>Ctrl</key><key>End</key></keyseq></td>
</tr>
</table>
<title>Selecting and copying text</title>
<table frame = "all" rules = "cols" shade = "rows">
<tr>
-
+
<td>Copy highlighted text.</td><td><keyseq><key>Ctrl</key><key>C</key></keyseq></td>
</tr>
<tr>
-
+
<td>Select all the text in a document.</td><td><keyseq><key>Ctrl</key><key>A</key></keyseq></td>
</tr>
</table>
<title>Finding text</title>
<table frame = "all" rules = "cols" shade = "rows">
<tr>
-
+
<td>
- Show the toolbar that lets you search for words in the document. The
- search box is automatically highlighted when you press this, and the
+ Show the toolbar that lets you search for words in the document. The
+ search box is automatically highlighted when you press this, and the
search will start as soon as you type some text.
</td><td><keyseq><key>Ctrl</key><key>F</key></keyseq></td>
</tr>
<tr>
-
+
<td>Go to the next search result.</td><td><keyseq><key>Ctrl</key><key>G</key></keyseq></td>
</tr>
<tr>
-
+
<td>Go to the previous search result.</td><td><keyseq><key>Ctrl</key><key>Shift</key><key>G</key></keyseq></td>
</tr>
</table>
<title>Rotating and zooming</title>
<table frame = "all" rules = "cols" shade = "rows">
<tr>
-
+
<td>Rotate the pages 90 degrees counter-clockwise.</td><td><keyseq><key>Ctrl</key><key>Left arrow</key></keyseq></td>
</tr>
<tr>
-
+
<td>Rotate the pages 90 degrees clockwise.</td><td><keyseq><key>Ctrl</key><key>Right arrow</key></keyseq></td>
</tr>
<tr>
-
+
<td>Zoom in.</td><td><keyseq><key>Ctrl</key><key>+</key></keyseq></td>
</tr>
<tr>
-
+
<td>Zoom out.</td><td><keyseq><key>Ctrl</key><key>-</key></keyseq></td>
</tr>
</table>
</p>
</item>
<item>
- <p>
+ <p>
In the Configuration Editor select <guiseq><gui>desktop</gui><gui>gnome</gui><gui>interface</gui></guiseq>.
</p>
</item>
<item>
- <p>
+ <p>
Check the value box for <gui>can_change_accels</gui> in the right side of the window.
</p>
</item>
<item>
- <p>
+ <p>
You can add/change the shortcut as follows:
</p>
<list style = "auto">
--- /dev/null
+ <page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="singlesided-13-16page">
+
+ <info>
+ <link type="guide" xref="print-booklet#singleSided"/>
+
+ <desc>Print a 13, 14, 15 or 16 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>13-Page to 16-Page Booklet</title>
+
+ <p>
+ If you have a 13, 14 or 15 page PDF document you should add the appropriate number of blank pages to make it 16-pages. To do so, you can:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank pages with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+ </item>
+</steps>
+
+ <p>
+ To print:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <tree>
+ <item>
+ Type the numbers of the pages in this order:
+ <item>16, 1, 2, 15, 14, 3, 4, 13, 12, 5, 6, 11, 10, 7, 8, 9</item>
+ </item>
+ </tree>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> menu, select <gui>One Sided</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> menu, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Odd sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ When all the pages have printed, flip the pages over and place them back in the printer.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Even sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ </steps>
+
+</page>
--- /dev/null
+ <page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="singlesided-17-20page">
+
+ <info>
+ <link type="guide" xref="print-booklet#singleSided"/>
+
+ <desc>Print a 17, 18, 19 or 20 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>17-Page to 20-Page Booklet</title>
+
+ <p>
+ If you have a 17, 18 or 19 page PDF document you should add the appropriate number of blank pages to make it 20-pages. To do so, you can:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank pages with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+ </item>
+</steps>
+
+ <p>
+ To print:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <tree>
+ <item>
+ Type the numbers of the pages in this order:
+ <item>20, 1, 2, 19, 18, 3, 4, 17, 16, 5, 6, 15, 14, 7, 8, 13, 12, 9, 10, 11</item>
+ </item>
+ </tree>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> menu, select <gui>One Sided</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> menu, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Odd sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ When all the pages have printed, flip the pages over and place them back in the printer.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Even sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ </steps>
+</page>
--- /dev/null
+ <page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="singlesided-3-4page">
+
+ <info>
+ <link type="guide" xref="print-booklet#singleSided"/>
+ <title type="sort">03-Page or 4-Page Booklet</title>
+ <desc>Print a 3 or 4 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>3-Page or 4-Page Booklet</title>
+
+ <p>
+ If you have a 3-Page PDF document you should add a blank page to make it 4-pages. To do so, you can:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank page with your PDF document using <app>PDF-Shuffler</app> placing the blank page at the end.
+ </p>
+ </item>
+</steps>
+
+ <p>
+ To print:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 4, 1, 2, 3
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> menu, select <gui>One Sided</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> menu, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Odd sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ When all the pages have printed, flip the pages over and place them back in the printer.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Even sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ </steps>
+
+</page>
--- /dev/null
+ <page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="singlesided-5-8page">
+
+ <info>
+ <link type="guide" xref="print-booklet#singleSided"/>
+ <title type="sort">05-Page or 4-Page Booklet</title>
+ <desc>Print a 5, 6, 7 or 8 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>5-Page to 8-Page Booklet</title>
+
+ <p>
+ If you have a 5,6 or 7 page PDF document you should add the appropriate number of blank pages to make it 8-pages. To do so, you can:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank pages with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+ </item>
+</steps>
+
+ <p>
+ To print:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 8, 1, 2, 7, 6, 3, 4, 5
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> menu, select <gui>One Sided</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> menu, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Odd sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ When all the pages have printed, flip the pages over and place them back in the printer.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Even sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ </steps>
+
+</page>
--- /dev/null
+ <page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="singlesided-9-12page">
+
+ <info>
+ <link type="guide" xref="print-booklet#singleSided"/>
+ <title type="sort">09-Page or 12-Page Booklet</title>
+ <desc>Print a 9, 10, 11 or 12 page booklet.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-26" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>9-Page to 12-Page Booklet</title>
+
+ <p>
+ If you have a 9, 10 or 11 page PDF document you should add the appropriate number of blank pages to make it 12-pages. To do so, you can:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank pages with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+ </item>
+</steps>
+
+ <p>
+ To print:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+
+
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <p>
+ Type the numbers of the pages in this order: 12, 1, 2, 11, 10, 3, 4, 9, 8, 5, 6, 7
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> menu, select <gui>One Sided</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> menu, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Odd sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ When all the pages have printed, flip the pages over and place them back in the printer.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Even sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+
+ </steps>
+
+</page>
--- /dev/null
+ <page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="singlesided-npage">
+
+ <info>
+ <link type="guide" xref="print-booklet#singleSided"/>
+
+ <desc>Print a booklet over 20 pages.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-10-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>n-Page Booklet</title>
+ <note style="important">
+ <p>
+ <em>n</em> is a multiple of 4.
+ </p>
+ </note>
+ <p>
+ If the number of pages in your PDF document is not a multiple of 4, you should add the appropriate number of blank pages (1,2 or 3) to make it a multiple of 4.
+ To do so, you can:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Create a blank PDF using <app>Open Office Word Processor</app>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Merge the blank pages with your PDF document using <app>PDF-Shuffler</app> placing the blank pages at the end.
+ </p>
+ </item>
+</steps>
+
+ <p>
+ To print:
+ </p>
+ <steps>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>General</gui> tab.
+ </p>
+ <p>
+ Under <em>Range</em>, choose <gui>Pages</gui>.
+ </p>
+ <tree>
+ <item>
+ Type the numbers of the pages in this order:
+ <item>n, 1, 2, n-1, n-2, 3, 4, n-3, n-4, 5, 6, n-5, n-6, 7, 8, n-7, n-8, 9, 10, n-9, n-10, 11, 12, n-11...</item>
+ <item>...until you have typed n-number of pages.</item>
+ </item>
+ </tree>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ Under <em>Layout</em>, in the <gui>Two-side</gui> menu, select <gui>One Sided</gui>.
+ </p>
+ <p>
+ In the <gui>Pages per side</gui> menu, select <gui>2</gui>.
+ </p>
+ <p>
+ In the <gui>Page ordering</gui> menu, select <gui>Left to right</gui>.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Odd sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ When all the pages have printed, flip the pages over and place them back in the printer.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <guiseq><gui>File</gui><gui>Print</gui></guiseq>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Choose the <gui>Page Setup</gui> tab.
+ </p>
+ <p>
+ In the <gui>Only print</gui> menu, select <gui>Even sheets</gui>.
+ </p>
+ </item>
+ <item>
+ <p>
+ Click <gui>Print</gui>.
+ </p>
+ </item>
+ </steps>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="synctex-beamer">
+
+ <info>
+ <link type="guide" xref="index#synctex" group="sixth"/>
+ <desc>Using SyncTex with the LaTeX Beamer class.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-09-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+ </info>
+
+<title>Beamer with SyncTex</title>
+<p>
+ Beamer is a LaTeX class for creating slides for presentations.
+</p>
+<p>
+ You can perform forward and backward search in a <em>Beamer-LaTeX</em> presentation in a similar fashion to <link xref="synctex-search">searchng</link> through other TeX files compiled with SyncTex. However the search brings you to the corresponding frame (slide), not necessarily the associated line of text. This difference is outlined in detail below.
+</p>
+<section id="forward-search">
+ <title>Forward Search: From Beamer-LaTeX source to PDF (<app>Gedit</app> to <app>Evince</app>)</title>
+ <p>
+ With <link xref="synctex-search#forward-search">forward search</link>, you can click on a specific line of Beamer-LaTeX source code. The <em>top</em> of the corresponding slide in the PDF will be outlined in red. This will often be the <em>frametitle</em>.
+ </p>
+</section>
+
+<section id="backward-search">
+
+ <title>Backward Search: From PDF to Beamer-LaTeX source(<app>Evince</app> to <app>Gedit</app>)</title>
+ <p>
+ With <link xref="synctex-search#backward-search">backward search</link>, you click on some text in a frame, and the corresponding line of LaTex code that ends that particular frame is highlighted.
+ </p>
+ <code>\end{frame}</code>
+
+
+</section>
+
+
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="synctex-compile">
+
+ <info>
+ <link type="guide" xref="index#synctex" group="third"/>
+ <desc>How to compile your TeX document with SyncTex</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-09-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+ </info>
+
+<title>Compile TeX with SyncTex</title>
+<p>
+Adding the line <em>\synctex=1</em> in the preamble of your TeX file will trigger synchronization with SyncTeX.
+</p>
+<code>
+\documentclass{article}
+\synctex=1
+\usepackage{fullpage}
+\begin{document}
+...
+\end{document}
+</code>
+<p>
+ Alternatively, you can run the pdflatex command with the <em>-synctex=1</em> option:
+</p>
+<screen>pdflatex -synctex=1 yourFile.tex</screen>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="synctex-editors">
+
+ <info>
+ <link type="guide" xref="index#synctex" group="fourth"/>
+ <desc>Which editor can you use to edit your TEX file?</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-09-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>Supported Editors</title>
+
+<section><title><app>Gedit</app></title>
+<p>
+<link xref="synctex-search#forward-search">Forward Search</link> (from <app>Gedit</app> to <app>Evince</app>) and <link xref="synctex-search#backward-search">Backward search</link> (from <app>Evince</app> to <app>Gedit</app>) are both supported.
+</p>
+</section>
+
+<section><title>Vim-latex</title>
+<p>
+The <app>Gedit</app> plugin contains a python script (evince_dbus.py) that can be used to get Synctex working with Vim.
+In order to use vim-latex together with <app>Evince</app> you need to follow the next steps:
+</p>
+<steps>
+ <item>
+ <p>
+ Copy the evince_dbus.py to some directory in your path and give it +x permissions.
+
+ </p>
+ </item>
+ <item>
+ <p>
+ Modify your ~/.vimrc file and add the following lines.
+ </p>
+<code>
+let g:Tex_ViewRule_pdf = 'evince_dbus.py'
+let g:Tex_DefaultTargetFormat = 'pdf'
+let g:Tex_CompileRule_pdf = 'pdflatex --synctex=1 -interaction=nonstopmode $*'
+</code>
+
+ </item>
+ <item>
+ <p>
+ Now you can use Forward search from vim-latex by typing \ls. Backward search is not yet supported.
+ </p>
+ </item>
+</steps>
+</section>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="synctex-search">
+
+ <info>
+ <link type="guide" xref="index#synctex" group="fifth"/>
+ <desc>Flip between <app>Evince</app> and <app>Gedit</app>.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-09-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>Search with SyncTex</title>
+<p>
+ After you <link xref="synctex-compile">compile your TeX file with SyncTex</link>, you will be able to search. SyncTex even supports forward and backward search from an included file.
+</p>
+
+<section id="forward-search">
+ <title>Forward Search: From TeX to PDF (<app>Gedit</app> to <app>Evince</app>)</title>
+ <p>
+ Forward search allows you to click on a specific section of TeX source code, and jump to the associated position in the PDF. To perform forward search:
+ </p>
+<steps>
+<item>
+<p>
+ Click on a line in the TeX file.
+</p>
+</item>
+<item>
+<p>
+ In <app>Gedit</app>, click <guiseq><gui>Tools</gui> <gui>Forward Search</gui></guiseq>. The corresponding line in the PDF will be outlined in red.
+</p>
+<p>
+Alternatively, you can click <keyseq><key>Ctrl</key><key>Alt</key><key>F</key></keyseq>, or <key>Ctrl</key>+Left Click. The corresponding line in the PDF will be outlined in red.
+</p>
+</item>
+</steps>
+<note>
+<p>
+ If the corresponding PDF file is not open, performing a forward search will open the PDF in <app>Evince</app>.
+</p>
+</note>
+<p>
+ If you add a complex project with several TeX files you can put
+</p>
+<code>% mainfile: mainfile.tex</code>
+<p>
+either in the first or last three lines of each included TeX file, and forward search will work. Backward search should always work, even if you don't add the modeline.
+</p>
+
+</section>
+
+<section id="backward-search">
+ <title>Backward Search: From PDF to TeX (<app>Evince</app> to <app>Gedit</app>)</title>
+ <p>
+ Backward search allows you to click on a specific line in the PDF file, and jump to the associated line in the TeX source code.
+</p>
+<p>
+You can perform a backward search by pressing <key>Ctrl</key>+ Left Click in <app>Evince</app>. The corresponding line in the TeX source code will be hightlighted.
+ </p>
+</section>
+
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="synctex-support">
+
+ <info>
+ <link type="guide" xref="index#synctex" group="second"/>
+ <desc>How to add support for SyncTex.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-09-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+
+ </info>
+
+<title>Set-up SyncTex</title>
+<p>
+The following packages need to be installed in order to add support for SyncTex:
+</p>
+<list>
+ <item>
+ <p>
+ texlive-extra-utils
+ </p>
+ </item>
+ <item>
+ <p>
+ gedit-plugins
+ </p>
+ </item>
+</list>
+
+<p>
+ In <app>Gedit</app>, enable the SyncTex Plugin:
+</p>
+<steps>
+ <item>
+ <p>
+ Click <guiseq><gui>Edit</gui><gui>Preferences</gui><gui>Plugins</gui></guiseq> tab.
+ </p>
+ </item>
+ <item>
+ <p>
+ Check <gui>SyncTex</gui>.
+ </p>
+ </item>
+</steps>
+</page>
--- /dev/null
+<page xmlns="http://projectmallard.org/1.0/"
+ type="topic" style="task"
+ id="synctex">
+
+ <info>
+ <link type="guide" xref="index#synctex" group="first"/>
+ <desc>SyncTeX support is available in <app>Evince</app>.</desc>
+
+ <revision pkgversion="2.32" version="0.1" date="2010-09-28" status="draft"/>
+ <credit type="author">
+ <name>Tiffany Antopolski</name>
+ <email>tiffany@antopolski.com</email>
+ </credit>
+ <license>
+ <p>Creative Commons Share Alike 3.0</p>
+ </license>
+ </info>
+
+<title>What is SyncTex?</title>
+<p>
+ SyncTeX is a method that enables synchronization between a TeX source file and the resulting PDF output.
+</p>
+
+</page>
id="textselection">
<info>
- <link type="guide" xref="index#problems"/>
+ <link type="guide" xref="index#faq"/>
<desc>When you copy text, the text that is pasted might be different from what you had selected.</desc>
<revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
</credit>
<license>
<p>Creative Commons Share Alike 3.0</p>
- </license>
+ </license>
</info>
<p>
-If you highlight and copy text from a document using <app>Evince Document Viewer</app> and then paste it into another
+If you highlight and copy text from a document using <app>Evince</app> and then paste it into another
application, the formatting may alter. It may also contain different characters than the original selection. This often happens when copying text from a PDF document with multiple columns.
</p>
-<note>
+
<p>
- This problem happens because of how some document formats handle text.
- The actual text in the document is stored differently from the way it is
+ This problem happens because of how some document formats handle text.
+ The actual text in the document is stored differently from the way it is
displayed. This may result in a copy that does not appear as expected.
</p>
-</note>
-
-<note style="tip">
- <p>
- Unfortunately, there is no real way of fixing this problem. Copying
- less text at a time, or copying the text into a text editor may minimise the problem. You can locate a text editor by clicking: </p>
-<list>
- <item>
- <p>
- <guiseq><gui>Applications</gui><gui>Accessories</gui><gui>gedit Text Editor</gui></guiseq>.
+
+ <p>
+ Unfortunately, there is no real way of fixing this problem. Copying
+ less text at a time, or copying the text into a text editor may minimise the problem. You can locate a text editor by clicking <guiseq><gui>Applications</gui><gui>Accessories</gui><gui>Text Editor</gui></guiseq>.
</p>
- </item>
-</list>
-</note>
</page>
+++ /dev/null
-<page xmlns="http://projectmallard.org/1.0/"
- type="guide" style="task"
- id="tips">
-
- <info>
- <link type="guide" xref="index#other"/>
- <desc>Learn about extra features, and ways you can use the Document Viewer more effectively.</desc>
-
- <revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
- <credit type="author">
- <name>Phil Bull</name>
- <email>philbull@gmail.com</email>
- </credit>
- <license>
- <p>Creative Commons Share Alike 3.0</p>
- </license>
-
- </info>
-
-<title>Tips And Tricks</title>
-<p>
-Learn how you can use the Document Viewer more effectively, by making use of
-features that might not be obvious.
-</p>
-
-</page>
+++ /dev/null
-<page xmlns="http://projectmallard.org/1.0/"
- type="topic" style="task"
- id="zooming">
-
- <info>
- <link type="guide" xref="index#reading"/>
- <desc>Change the size of the document by zooming in or out of the page.</desc>
-
- <revision pkgversion="2.30.3" version="0.1" date="2010-07-26" status="review"/>
- <credit type="author">
- <name>Phil Bull</name>
- <email>philbull@gmail.com</email>
- </credit>
- <license>
- <p>Creative Commons Share Alike 3.0</p>
- </license>
-
- </info>
-
-<title>Zooming In And Out</title>
-
-<list>
- <item><p>Click <guiseq><gui>View</gui><gui>Zoom In</gui></guiseq> or use the keyboard shortcuts <keyseq><key>Ctrl</key><key>+</key></keyseq> to zoom in.</p></item>
-<item><p>Click <guiseq><gui>View</gui><gui>Zoom Out</gui></guiseq> or use the keyboard shortcuts <keyseq><key>Ctrl</key><key>-</key></keyseq> to zoom out.</p></item>
-</list>
-
-<p>Alternatively, you can do one of the following:</p>
-<list>
- <item><p>hold down <key>Ctrl</key> and use your mouse scroll wheel to zoom.</p></item>
- <item><p>select desired zoom percentage from the drop down menu above the window.</p>
- <media type="image" src="zoom.png"/>
- </item>
-</list>
-<note>
-<p>
-The <gui>Best Fit</gui> option will make a document page fit the whole <em>height</em> of the window. </p>
-<p>The <gui>Fit Page Width</gui> option will make a
-document page fill the whole <em>width</em> of the window.
-</p>
-<p>
-If you want to see two pages at once, side by side, like in a book, click
-<guiseq><gui>View</gui><gui>Dual</gui></guiseq>.
-</p>
-</note>
-<p>You can use the whole of your screen to view the document:</p>
-
-<list>
- <item><p>Click <guiseq><gui>View</gui><gui>Fullscreen</gui></guiseq> or press <key>F11</key>. </p></item>
- <item><p>To exit from the full screen mode:</p>
- <list>
- <item><p>Press <key>F11</key> or <key>Escape</key></p></item>
- <item><p>or click the <gui>Leave Fullscreen</gui> button at the top of the screen.</p></item>
- </list>
- </item>
-</list>
-
-</page>
--- /dev/null
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# help/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# gnome-doc-utils.make - make magic for building documentation
+# Copyright (C) 2004-2005 Shaun McCance <shaunm@gnome.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+################################################################################
+
+pkgdatadir = $(datadir)/evince
+pkgincludedir = $(includedir)/evince
+pkglibdir = $(libdir)/evince
+pkglibexecdir = $(libexecdir)/evince
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = i686-pc-linux-gnu
+host_triplet = i686-pc-linux-gnu
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/gnome-doc-utils.make ChangeLog
+subdir = help
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gnome-doc-utils.m4 \
+ $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/intltool.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo " GEN " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+ACLOCAL = ${SHELL} /home/mimico/checkout/gnome/evince/missing --run aclocal-1.11
+ALL_LINGUAS =
+AMTAR = ${SHELL} /home/mimico/checkout/gnome/evince/missing --run tar
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /home/mimico/checkout/gnome/evince/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/mimico/checkout/gnome/evince/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/mimico/checkout/gnome/evince/missing --run automake-1.11
+AWK = gawk
+BACKEND_CFLAGS = -pthread -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/libpng12 -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE
+BACKEND_LIBS = -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -lm
+BACKEND_LIBTOOL_FLAGS = -module -avoid-version -no-undefined -export-symbols $(top_srcdir)/backend/backend.symbols
+CAIRO_PDF_CFLAGS = -pthread -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+CAIRO_PDF_LIBS = -L/home/mimico/gnome/lib -lz -lcairo
+CAIRO_PS_CFLAGS = -pthread -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+CAIRO_PS_LIBS = -L/home/mimico/gnome/lib -lz -lcairo
+CATALOGS =
+CATOBJEXT = .gmo
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2
+CPP = gcc -E
+CPPFLAGS =
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CYGPATH_W = echo
+DATADIRNAME = share
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DISABLE_DEPRECATED =
+DISTCHECK_CONFIGURE_FLAGS = --disable-scrollkeeper
+DJVU_CFLAGS = -pthread
+DJVU_LIBS = -ldjvulibre
+DOC_USER_FORMATS =
+DSYMUTIL =
+DUMPBIN =
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+EGREP = /bin/grep -E
+EVINCE_MIME_TYPES = application/pdf;application/x-bzpdf;application/x-gzpdf;application/postscript;application/x-bzpostscript;application/x-gzpostscript;image/x-eps;image/x-bzeps;image/x-gzeps;application/x-dvi;application/x-bzdvi;application/x-gzdvi;image/vnd.djvu;image/tiff;application/x-cbr;application/x-cbz;application/x-cb7;application/x-cbt;
+EV_API_VERSION = 2.32
+EV_API_VERSION_U = 2_32
+EV_BINARY_VERSION = 3
+EV_DAEMON_CFLAGS = -pthread -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include
+EV_DAEMON_LIBS = -pthread -L/home/mimico/gnome/lib -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
+EV_DOCUMENT_LT_CURRENT_MINUS_AGE = 3
+EV_DOCUMENT_LT_VERSION_INFO = 3:0:0
+EV_INTLTOOL_EVINCE_BACKEND_RULE = %.evince-backend: %.evince-backend.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; $(AM_V_GEN) LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+EV_MAJOR_VERSION = 2
+EV_MICRO_VERSION = 0
+EV_MINOR_VERSION = 32
+EV_VIEW_LT_CURRENT_MINUS_AGE = 3
+EV_VIEW_LT_VERSION_INFO = 3:0:0
+EXEEXT =
+FGREP = /bin/grep -F
+FRONTEND_CFLAGS = -pthread -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+FRONTEND_CORE_CFLAGS = -pthread -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+FRONTEND_CORE_LIBS = -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
+FRONTEND_LIBS = -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -lz
+GCONFTOOL = /usr/bin/gconftool-2
+GCONF_CFLAGS = -DORBIT2=1 -pthread -I/home/mimico/gnome/include/gconf/2 -I/home/mimico/gnome/include/orbit-2.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include
+GCONF_LIBS = -L/home/mimico/gnome/lib -lgconf-2 -lglib-2.0
+GCONF_SCHEMA_CONFIG_SOURCE = xml:merged:/home/mimico/gnome/etc/gconf/gconf.xml.defaults
+GCONF_SCHEMA_FILE_DIR = $(sysconfdir)/gconf/schemas
+GETTEXT_PACKAGE = evince
+GIRDIR =
+GIRTYPELIBDIR =
+GLIB_COMPILE_SCHEMAS = /home/mimico/gnome/bin/glib-compile-schemas
+GLIB_GENMARSHAL = /usr/bin/glib-genmarshal
+GLIB_MKENUMS = /usr/bin/glib-mkenums
+GLIB_PREFIX = /home/mimico/gnome
+GLIB_REQUIRED = 2.25.11
+GMOFILES =
+GMSGFMT = /usr/bin/msgfmt
+GOBJECT_INTROSPECTION_CFLAGS =
+GOBJECT_INTROSPECTION_LIBS =
+GREP = /bin/grep
+GSETTINGS_DISABLE_SCHEMAS_COMPILE =
+GTKDOC_CHECK = /usr/bin/gtkdoc-check
+GTKDOC_MKPDF = /usr/bin/gtkdoc-mkpdf
+GTKDOC_REBASE = /usr/bin/gtkdoc-rebase
+GTKUNIXPRINT_CFLAGS = -pthread -I/home/mimico/gnome/include/gtk-unix-print-2.0 -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+GTKUNIXPRINT_LIBS = -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
+GTK_API_VERSION = 2.0
+GTK_PREFIX = /home/mimico/gnome
+GTK_REQUIRED = 2.21.5
+G_IR_COMPILER =
+G_IR_GENERATE =
+G_IR_SCANNER =
+HELP_DIR = ${datadir}/gnome/help
+HTML_DIR = ${datadir}/gtk-doc/html
+INSTALL = /home/mimico/.local/bin/install-check
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INSTOBJEXT = .mo
+INTLLIBS =
+INTLTOOL_EXTRACT = /usr/bin/intltool-extract
+INTLTOOL_MERGE = /usr/bin/intltool-merge
+INTLTOOL_PERL = /usr/bin/perl
+INTLTOOL_UPDATE = /usr/bin/intltool-update
+KEYRING_CFLAGS = -I/home/mimico/gnome/include/gnome-keyring-1 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include
+KEYRING_LIBS = -L/home/mimico/gnome/lib -lgnome-keyring -lglib-2.0
+LD = /usr/bin/ld
+LDFLAGS = -L/home/mimico/gnome/lib
+LIBDOCUMENT_CFLAGS = -pthread -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+LIBDOCUMENT_LIBS = -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
+LIBOBJS =
+LIBS =
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBVIEW_CFLAGS = -pthread -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/home/mimico/gnome/include/gail-1.0 -I/usr/include/freetype2 -I/usr/include/libpng12 -pthread -I/home/mimico/gnome/include/gtk-unix-print-2.0 -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+LIBVIEW_LIBS = -pthread -L/home/mimico/gnome/lib -lgailutil -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -lm
+LIPO =
+LN_S = ln -s
+LTLIBOBJS =
+MAINT =
+MAKEINFO = ${SHELL} /home/mimico/checkout/gnome/evince/missing --run makeinfo
+MKDIR_P = /bin/mkdir -p
+MKINSTALLDIRS = ./mkinstalldirs
+MSGFMT = /usr/bin/msgfmt
+MSGFMT_OPTS = -c
+MSGMERGE = /usr/bin/msgmerge
+NAUTILUS_CFLAGS = -pthread -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/nautilus
+NAUTILUS_LIBS = -pthread -L/home/mimico/gnome/lib -lnautilus-extension -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0
+NM = /usr/bin/nm -B
+NMEDIT =
+OBJDUMP = objdump
+OBJEXT = o
+OMF_DIR = ${datadir}/omf
+OTOOL =
+OTOOL64 =
+PACKAGE = evince
+PACKAGE_BUGREPORT = http://bugzilla.gnome.org/enter_bug.cgi?product=evince
+PACKAGE_NAME = Evince
+PACKAGE_STRING = Evince 2.32.0
+PACKAGE_TARNAME = evince
+PACKAGE_URL =
+PACKAGE_VERSION = 2.32.0
+PATH_SEPARATOR = :
+PKG_CONFIG = /usr/bin/pkg-config
+POFILES =
+POPPLER_CFLAGS = -pthread -I/home/mimico/gnome/include/poppler/glib -I/home/mimico/gnome/include/poppler -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pixman-1 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/libxml2 -I/usr/include/freetype2 -I/usr/include/libpng12
+POPPLER_LIBS = -pthread -L/home/mimico/gnome/lib -lpoppler-glib -lgdk-x11-2.0 -lpoppler -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -lpng12 -lgthread-2.0 -lrt -lglib-2.0 -lxml2
+POSUB = po
+PO_IN_DATADIR_FALSE =
+PO_IN_DATADIR_TRUE =
+PREVIEWER_CFLAGS = -pthread -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -pthread -I/home/mimico/gnome/include/gtk-unix-print-2.0 -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+PREVIEWER_LIBS = -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -lz
+RANLIB = ranlib
+SED = /bin/sed
+SET_MAKE =
+SHELL = /bin/bash
+SHELL_CFLAGS = -pthread -I/home/mimico/gnome/include/libxml2 -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -I/home/mimico/gnome/include/gnome-keyring-1 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -DORBIT2=1 -pthread -I/home/mimico/gnome/include/gconf/2 -I/home/mimico/gnome/include/orbit-2.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE
+SHELL_CORE_CFLAGS = -pthread -I/home/mimico/gnome/include/libxml2 -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+SHELL_CORE_LIBS = -pthread -L/home/mimico/gnome/lib -lxml2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -lX11
+SHELL_LIBS = -pthread -L/home/mimico/gnome/lib -lxml2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgio-2.0 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -lX11 -L/home/mimico/gnome/lib -lgnome-keyring -lglib-2.0 -L/home/mimico/gnome/lib -lgconf-2 -lglib-2.0 -lz -lm
+SMCLIENT_CFLAGS = -pthread -I/home/mimico/gnome/include/gtk-2.0 -I/home/mimico/gnome/lib/gtk-2.0/include -I/home/mimico/gnome/include/atk-1.0 -I/home/mimico/gnome/include/cairo -I/home/mimico/gnome/include/gdk-pixbuf-2.0 -I/home/mimico/gnome/include/pango-1.0 -I/home/mimico/gnome/include/glib-2.0 -I/home/mimico/gnome/lib/glib-2.0/include -I/home/mimico/gnome/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12
+SMCLIENT_LIBS = -pthread -L/home/mimico/gnome/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lm -lcairo -lpng12 -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0 -lSM
+SPECTRE_CFLAGS =
+SPECTRE_LIBS = -lspectre
+STRIP = strip
+USE_NLS = yes
+VERSION = 2.32.0
+WARN_CFLAGS = -Wall -Wmissing-prototypes
+WARN_CXXFLAGS = -g -O2 -Wall -Wno-unused
+WINDRES =
+XGETTEXT = /usr/bin/xgettext
+abs_builddir = /home/mimico/checkout/gnome/evince/help
+abs_srcdir = /home/mimico/checkout/gnome/evince/help
+abs_top_builddir = /home/mimico/checkout/gnome/evince
+abs_top_srcdir = /home/mimico/checkout/gnome/evince
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN =
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+backend_binary_version = 3
+backenddir = $(libdir)/evince/3/backends
+bindir = ${exec_prefix}/bin
+build = i686-pc-linux-gnu
+build_alias =
+build_cpu = i686
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+gsettingsschemadir = ${datarootdir}/glib-2.0/schemas
+host = i686-pc-linux-gnu
+host_alias =
+host_cpu = i686
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /home/mimico/checkout/gnome/evince/install-sh
+libdir = /home/mimico/gnome/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+lt_ECHO = echo
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+nautilusextensiondir = /usr/lib/nautilus/extensions-2.0
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /home/mimico/gnome
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias =
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+SUBDIRS = reference
+_clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header)
+_DOC_REAL_FORMATS = $(if $(DOC_USER_FORMATS),$(DOC_USER_FORMATS),$(DOC_FORMATS))
+_DOC_REAL_LINGUAS = $(if $(filter environment,$(origin LINGUAS)), \
+ $(filter $(LINGUAS),$(DOC_LINGUAS)), \
+ $(DOC_LINGUAS))
+
+_DOC_ABS_SRCDIR = /home/mimico/checkout/gnome/evince/help
+_xml2po_mode = $(if $(DOC_ID),mallard,docbook)
+_ENABLE_SK = true
+
+################################################################################
+db2omf_args = \
+ --stringparam db2omf.basename $(DOC_MODULE) \
+ --stringparam db2omf.format $(3) \
+ --stringparam db2omf.dtd \
+ $(shell xmllint --format $(2) | grep -h PUBLIC | head -n 1 \
+ | sed -e 's/.*PUBLIC \(\"[^\"]*\"\).*/\1/') \
+ --stringparam db2omf.lang $(notdir $(patsubst %/$(notdir $(2)),%,$(2))) \
+ --stringparam db2omf.omf_dir "$(OMF_DIR)" \
+ --stringparam db2omf.help_dir "$(HELP_DIR)" \
+ --stringparam db2omf.omf_in "$(_DOC_OMF_IN)" \
+ $(if $(_ENABLE_SK), \
+ --stringparam db2omf.scrollkeeper_cl "$(_skcontentslist)") \
+ $(_db2omf) $(2)
+
+_DOC_OMF_IN = $(if $(DOC_MODULE),$(wildcard $(_DOC_ABS_SRCDIR)/$(DOC_MODULE).omf.in))
+_DOC_OMF_DB = $(if $(_DOC_OMF_IN), \
+ $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-$(lc).omf))
+
+_DOC_OMF_HTML = $(if $(_DOC_OMF_IN), \
+ $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-html-$(lc).omf))
+
+
+# FIXME
+_DOC_OMF_ALL = \
+ $(if $(filter docbook,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_DB)) \
+ $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_HTML))
+
+
+################################################################################
+_DOC_C_MODULE = $(if $(DOC_MODULE),C/$(DOC_MODULE).xml)
+_DOC_C_PAGES = $(foreach page,$(DOC_PAGES),C/$(page))
+_DOC_C_ENTITIES = $(foreach ent,$(DOC_ENTITIES),C/$(ent))
+_DOC_C_INCLUDES = $(foreach inc,$(DOC_INCLUDES),C/$(inc))
+_DOC_C_DOCS = \
+ $(_DOC_C_ENTITIES) $(_DOC_C_INCLUDES) \
+ $(_DOC_C_PAGES) $(_DOC_C_MODULE)
+
+_DOC_C_DOCS_NOENT = \
+ $(_DOC_C_MODULE) $(_DOC_C_INCLUDES) \
+ $(_DOC_C_PAGES)
+
+_DOC_C_FIGURES = $(if $(DOC_FIGURES), \
+ $(foreach fig,$(DOC_FIGURES),C/$(fig)), \
+ $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/C/figures/*.png)))
+
+
+# FIXME: probably have to shell escape to determine the file names
+_DOC_C_HTML = $(foreach f, \
+ $(shell xsltproc --xinclude \
+ --stringparam db.chunk.basename "$(DOC_MODULE)" \
+ $(_chunks) "C/$(DOC_MODULE).xml"), \
+ C/$(f).xhtml)
+
+
+###############################################################################
+_DOC_POFILES = $(if $(DOC_MODULE)$(DOC_ID), \
+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(lc).po))
+
+_DOC_MOFILES = $(patsubst %.po,%.mo,$(_DOC_POFILES))
+_DOC_LC_MODULES = $(if $(DOC_MODULE), \
+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xml))
+
+_DOC_LC_PAGES = \
+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach page,$(_DOC_C_PAGES), \
+ $(lc)/$(notdir $(page)) ))
+
+_DOC_LC_INCLUDES = \
+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach inc,$(_DOC_C_INCLUDES), \
+ $(lc)/$(notdir $(inc)) ))
+
+
+# FIXME: probably have to shell escape to determine the file names
+_DOC_LC_HTML = \
+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach doc,$(_DOC_C_HTML), \
+ $(lc)/$(notdir $(doc)) ))
+
+_DOC_LC_DOCS = \
+ $(_DOC_LC_MODULES) $(_DOC_LC_INCLUDES) $(_DOC_LC_PAGES) \
+ $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_LC_HTML))
+
+_DOC_LC_FIGURES = $(foreach lc,$(_DOC_REAL_LINGUAS), \
+ $(patsubst C/%,$(lc)/%,$(_DOC_C_FIGURES)) )
+
+_DOC_SRC_FIGURES = \
+ $(foreach fig,$(_DOC_C_FIGURES), $(foreach lc,C $(_DOC_REAL_LINGUAS), \
+ $(wildcard $(srcdir)/$(lc)/$(patsubst C/%,%,$(fig))) ))
+
+_DOC_POT = $(if $(DOC_MODULE),$(DOC_MODULE).pot)
+
+################################################################################
+_DOC_HTML_ALL = $(if $(filter html HTML,$(_DOC_REAL_FORMATS)), \
+ $(_DOC_C_HTML) $(_DOC_LC_HTML))
+
+_DOC_HTML_TOPS = $(foreach lc,C $(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xhtml)
+_clean_omf = $(if $(_DOC_OMF_IN),clean-doc-omf)
+_clean_dsk = $(if $(_DOC_DSK_IN),clean-doc-dsk)
+_clean_lc = $(if $(_DOC_REAL_LINGUAS),clean-doc-lc)
+_clean_dir = $(if $(DOC_MODULE)$(DOC_ID),clean-doc-dir)
+_doc_install_dir = $(if $(DOC_ID),$(DOC_ID),$(DOC_MODULE))
+DOC_MODULE = evince
+DOC_ENTITIES = legal.xml
+DOC_INCLUDES =
+DOC_FIGURES = figures/evince_start_window.png
+DOC_LINGUAS = bg ca cs de el en_GB es eu fi fr it ja nl oc pt_BR ru sl sr sv uk vi zh_CN
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/gnome-doc-utils.make $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign help/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign help/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+#dist-hook:
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+#uninstall-local:
+#distclean-local:
+#install-data-local:
+#maintainer-clean-local:
+#mostlyclean-local:
+#clean-local:
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-local \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic \
+ maintainer-clean-local
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
+ mostlyclean-local
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-local
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+ install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic clean-libtool \
+ clean-local ctags ctags-recursive dist-hook distclean \
+ distclean-generic distclean-libtool distclean-local \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am \
+ install-data-local install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-local mostlyclean \
+ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-local
+
+
+DOC_H_FILE ?=
+
+DOC_H_DOCS ?=
+
+$(DOC_H_FILE): $(DOC_H_DOCS);
+ @rm -f $@.tmp; touch $@.tmp;
+ echo 'const gchar* documentation_credits[] = {' >> $@.tmp
+ list='$(DOC_H_DOCS)'; for doc in $$list; do \
+ xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \
+ if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \
+ xsltproc --path "$$xmlpath" $(_credits) $$doc; \
+ done | sort | uniq \
+ | awk 'BEGIN{s=""}{n=split($$0,w,"<");if(s!=""&&s!=substr(w[1],1,length(w[1])-1)){print s};if(n>1){print $$0;s=""}else{s=$$0}};END{if(s!=""){print s}}' \
+ | sed -e 's/\\/\\\\/' -e 's/"/\\"/' -e 's/\(.*\)/\t"\1",/' >> $@.tmp
+ echo ' NULL' >> $@.tmp
+ echo '};' >> $@.tmp
+ echo >> $@.tmp
+ list='$(DOC_H_DOCS)'; for doc in $$list; do \
+ xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \
+ if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \
+ docid=`echo "$$doc" | sed -e 's/.*\/\([^/]*\)\.xml/\1/' \
+ | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`; \
+ echo $$xmlpath; \
+ ids=`xsltproc --xinclude --path "$$xmlpath" $(_ids) $$doc`; \
+ for id in $$ids; do \
+ echo '#define HELP_'`echo $$docid`'_'`echo $$id \
+ | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`' "'$$id'"' >> $@.tmp; \
+ done; \
+ echo >> $@.tmp; \
+ done;
+ cp $@.tmp $@ && rm -f $@.tmp
+
+dist-check-gdu:
+# @echo "*** GNOME Doc Utils must be installed in order to make dist"
+# @false
+
+.PHONY: dist-doc-header
+dist-doc-header: $(DOC_H_FILE)
+ @if test -f "$(DOC_H_FILE)"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$(INSTALL_DATA) $${d}$(DOC_H_FILE) $(distdir)/$(DOC_H_FILE)"; \
+ $(INSTALL_DATA) "$${d}$(DOC_H_FILE)" "$(distdir)/$(DOC_H_FILE)";
+
+doc-dist-hook: dist-check-gdu $(if $(DOC_H_FILE),dist-doc-header)
+
+.PHONY: clean-doc-header
+clean-local: $(_clean_doc_header)
+distclean-local: $(_clean_doc_header)
+mostlyclean-local: $(_clean_doc_header)
+maintainer-clean-local: $(_clean_doc_header)
+clean-doc-header:
+ rm -f $(DOC_H_FILE)
+
+all: $(DOC_H_FILE)
+
+################################################################################
+
+DOC_MODULE ?=
+
+DOC_ID ?=
+
+DOC_PAGES ?=
+
+DOC_ENTITIES ?=
+
+DOC_INCLUDES ?=
+
+DOC_FIGURES ?=
+
+DOC_FORMATS ?= docbook
+
+DOC_LINGUAS ?=
+
+################################################################################
+
+_xml2po ?= `which xml2po`
+
+_db2html ?= `$(PKG_CONFIG) --variable db2html gnome-doc-utils`
+_db2omf ?= `$(PKG_CONFIG) --variable db2omf gnome-doc-utils`
+_malrng ?= `$(PKG_CONFIG) --variable malrng gnome-doc-utils`
+_chunks ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/chunks.xsl
+_credits ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/credits.xsl
+_ids ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/ids.xsl
+_skpkgdatadir ?= `scrollkeeper-config --pkgdatadir`
+_sklocalstatedir ?= `scrollkeeper-config --pkglocalstatedir`
+_skcontentslist ?= $(_skpkgdatadir)/Templates/C/scrollkeeper_cl.xml
+
+$(_DOC_OMF_DB) : $(_DOC_OMF_IN)
+$(_DOC_OMF_DB) : $(DOC_MODULE)-%.omf : %/$(DOC_MODULE).xml
+ @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \
+ echo "The file '$(_skcontentslist)' does not exist." >&2; \
+ echo "Please check your ScrollKeeper installation." >&2; \
+ exit 1; }
+ xsltproc -o $@ $(call db2omf_args,$@,$<,'docbook') || { rm -f "$@"; exit 1; }
+
+$(_DOC_OMF_HTML) : $(_DOC_OMF_IN)
+$(_DOC_OMF_HTML) : $(DOC_MODULE)-html-%.omf : %/$(DOC_MODULE).xml
+ @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \
+ echo "The file '$(_skcontentslist)' does not exist" >&2; \
+ echo "Please check your ScrollKeeper installation." >&2; \
+ exit 1; }
+ xsltproc -o $@ $(call db2omf_args,$@,$<,'xhtml') || { rm -f "$@"; exit 1; }
+
+.PHONY: omf
+omf: $(_DOC_OMF_ALL)
+
+.PHONY: po
+po: $(_DOC_POFILES)
+
+.PHONY: mo
+mo: $(_DOC_MOFILES)
+
+$(_DOC_POFILES):
+ @if ! test -d $(dir $@); then \
+ echo "mkdir $(dir $@)"; \
+ mkdir "$(dir $@)"; \
+ fi
+ @if test ! -f $@ -a -f $(srcdir)/$@; then \
+ echo "cp $(srcdir)/$@ $@"; \
+ cp "$(srcdir)/$@" "$@"; \
+ fi;
+ @docs=; \
+ list='$(_DOC_C_DOCS_NOENT)'; for doc in $$list; do \
+ docs="$$docs $(_DOC_ABS_SRCDIR)/$$doc"; \
+ done; \
+ if ! test -f $@; then \
+ echo "(cd $(dir $@) && \
+ $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \
+ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)"; \
+ (cd $(dir $@) && \
+ $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \
+ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp); \
+ else \
+ echo "(cd $(dir $@) && \
+ $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs)"; \
+ (cd $(dir $@) && \
+ $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs); \
+ fi
+
+$(_DOC_MOFILES): %.mo: %.po
+ @if ! test -d $(dir $@); then \
+ echo "mkdir $(dir $@)"; \
+ mkdir "$(dir $@)"; \
+ fi
+ msgfmt -o $@ $<
+
+# FIXME: fix the dependancy
+# FIXME: hook xml2po up
+$(_DOC_LC_DOCS) : $(_DOC_MOFILES)
+$(_DOC_LC_DOCS) : $(_DOC_C_DOCS)
+ if ! test -d $(dir $@); then mkdir $(dir $@); fi
+ if [ -f "C/$(notdir $@)" ]; then d="../"; else d="$(_DOC_ABS_SRCDIR)/"; fi; \
+ mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \
+ if [ -f "$${mo}" ]; then mo="../$${mo}"; else mo="$(_DOC_ABS_SRCDIR)/$${mo}"; fi; \
+ (cd $(dir $@) && \
+ $(_xml2po) -m $(_xml2po_mode) -e -t "$${mo}" \
+ "$${d}C/$(notdir $@)" > $(notdir $@).tmp && \
+ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)
+.PHONY: pot
+pot: $(_DOC_POT)
+$(_DOC_POT): $(_DOC_C_DOCS_NOENT)
+ $(_xml2po) -m $(_xml2po_mode) -e -o $@ $^
+
+$(_DOC_HTML_TOPS): $(_DOC_C_DOCS) $(_DOC_LC_DOCS)
+ xsltproc -o $@ --xinclude --param db.chunk.chunk_top "false()" --stringparam db.chunk.basename "$(DOC_MODULE)" --stringparam db.chunk.extension ".xhtml" $(_db2html) $(patsubst %.xhtml,%.xml,$@)
+
+################################################################################
+
+all: \
+ $(_DOC_C_DOCS) $(_DOC_LC_DOCS) \
+ $(_DOC_OMF_ALL) $(_DOC_DSK_ALL) \
+ $(_DOC_HTML_ALL) $(_DOC_POFILES)
+
+################################################################################
+
+.PHONY: clean-doc-omf clean-doc-dsk clean-doc-lc clean-doc-dir
+
+clean-doc-omf: ; rm -f $(_DOC_OMF_DB) $(_DOC_OMF_HTML)
+clean-doc-dsk: ; rm -f $(_DOC_DSK_DB) $(_DOC_DSK_HTML)
+clean-doc-lc:
+ rm -f $(_DOC_LC_DOCS)
+ rm -f $(_DOC_MOFILES)
+ @list='$(_DOC_POFILES)'; for po in $$list; do \
+ if ! test "$$po" -ef "$(srcdir)/$$po"; then \
+ echo "rm -f $$po"; \
+ rm -f "$$po"; \
+ fi; \
+ done
+# .xml2.po.mo cleaning is obsolete as of 0.18.1 and could be removed in 0.20.x
+ @for lc in C $(_DOC_REAL_LINGUAS); do \
+ if test -f "$$lc/.xml2po.mo"; then \
+ echo "rm -f $$lc/.xml2po.mo"; \
+ rm -f "$$lc/.xml2po.mo"; \
+ fi; \
+ done
+clean-doc-dir: clean-doc-lc
+ @for lc in C $(_DOC_REAL_LINGUAS); do \
+ for dir in `find $$lc -depth -type d`; do \
+ if ! test $$dir -ef $(srcdir)/$$dir; then \
+ echo "rmdir $$dir"; \
+ rmdir "$$dir"; \
+ fi; \
+ done; \
+ done
+
+clean-local: \
+ $(_clean_omf) $(_clean_dsk) \
+ $(_clean_lc) $(_clean_dir)
+distclean-local: \
+ $(_clean_omf) $(_clean_dsk) \
+ $(_clean_lc) $(_clean_dir)
+mostlyclean-local: \
+ $(_clean_omf) $(_clean_dsk) \
+ $(_clean_lc) $(_clean_dir)
+maintainer-clean-local: \
+ $(_clean_omf) $(_clean_dsk) \
+ $(_clean_lc) $(_clean_dir)
+
+################################################################################
+
+.PHONY: dist-doc-docs dist-doc-pages dist-doc-figs dist-doc-omf dist-doc-dsk
+doc-dist-hook: \
+ $(if $(DOC_MODULE)$(DOC_ID),dist-doc-docs) \
+ $(if $(_DOC_C_FIGURES),dist-doc-figs) \
+ $(if $(_DOC_OMF_IN),dist-doc-omf)
+# $(if $(_DOC_DSK_IN),dist-doc-dsk)
+
+dist-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)
+ @for lc in C $(_DOC_REAL_LINGUAS); do \
+ echo " $(mkinstalldirs) $(distdir)/$$lc"; \
+ $(mkinstalldirs) "$(distdir)/$$lc"; \
+ done
+ @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)'; \
+ for doc in $$list; do \
+ if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \
+ docdir=`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \
+ if ! test -d "$(distdir)/$$docdir"; then \
+ echo "$(mkinstalldirs) $(distdir)/$$docdir"; \
+ $(mkinstalldirs) "$(distdir)/$$docdir"; \
+ fi; \
+ echo "$(INSTALL_DATA) $$d$$doc $(distdir)/$$doc"; \
+ $(INSTALL_DATA) "$$d$$doc" "$(distdir)/$$doc"; \
+ done
+
+dist-doc-figs: $(_DOC_SRC_FIGURES)
+ @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; \
+ for fig in $$list; do \
+ if test -f "$$fig"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$fig"; then \
+ figdir=`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \
+ if ! test -d "$(distdir)/$$figdir"; then \
+ echo "$(mkinstalldirs) $(distdir)/$$figdir"; \
+ $(mkinstalldirs) "$(distdir)/$$figdir"; \
+ fi; \
+ echo "$(INSTALL_DATA) $$d$$fig $(distdir)/$$fig"; \
+ $(INSTALL_DATA) "$$d$$fig" "$(distdir)/$$fig"; \
+ fi; \
+ done;
+
+dist-doc-omf:
+ @if test -f "$(_DOC_OMF_IN)"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$(INSTALL_DATA) $$d$(_DOC_OMF_IN) $(distdir)/$(notdir $(_DOC_OMF_IN))"; \
+ $(INSTALL_DATA) "$$d$(_DOC_OMF_IN)" "$(distdir)/$(notdir $(_DOC_OMF_IN))"
+
+dist-doc-dsk:
+ @if test -f "$(_DOC_DSK_IN)"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$(INSTALL_DATA) $$d$(_DOC_DSK_IN) $(distdir)/$(notdir $(_DOC_DSK_IN))"; \
+ $(INSTALL_DATA) "$$d$(_DOC_DSK_IN)" "$(distdir)/$(notdir $(_DOC_DSK_IN))"
+
+################################################################################
+
+.PHONY: check-doc-docs check-doc-omf
+check: \
+ $(if $(DOC_MODULE),check-doc-docs) \
+ $(if $(DOC_ID),check-doc-pages) \
+ $(if $(_DOC_OMF_IN),check-doc-omf)
+
+check-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS)
+ @for lc in C $(_DOC_REAL_LINGUAS); do \
+ if test -f "$$lc"; \
+ then d=; \
+ xmlpath="$$lc"; \
+ else \
+ d="$(srcdir)/"; \
+ xmlpath="$$lc:$(srcdir)/$$lc"; \
+ fi; \
+ echo "xmllint --noout --noent --path $$xmlpath --xinclude --postvalid $$d$$lc/$(DOC_MODULE).xml"; \
+ xmllint --noout --noent --path "$$xmlpath" --xinclude --postvalid "$$d$$lc/$(DOC_MODULE).xml"; \
+ done
+
+check-doc-pages: $(_DOC_C_PAGES) $(_DOC_LC_PAGES)
+ for lc in C $(_DOC_REAL_LINGUAS); do \
+ if test -f "$$lc"; \
+ then d=; \
+ xmlpath="$$lc"; \
+ else \
+ d="$(srcdir)/"; \
+ xmlpath="$$lc:$(srcdir)/$$lc"; \
+ fi; \
+ for page in $(DOC_PAGES); do \
+ echo "xmllint --noout --noent --path $$xmlpath --xinclude --relaxng $(_malrng) $$d$$lc/$$page"; \
+ xmllint --noout --noent --path "$$xmlpath" --xinclude --relaxng "$(_malrng)" "$$d$$lc/$$page"; \
+ done; \
+ done
+
+check-doc-omf: $(_DOC_OMF_ALL)
+ @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \
+ echo "xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf"; \
+ xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf; \
+ done
+
+################################################################################
+
+.PHONY: install-doc-docs install-doc-html install-doc-figs install-doc-omf install-doc-dsk
+
+install-data-local: \
+ $(if $(DOC_MODULE)$(DOC_ID),install-doc-docs) \
+ $(if $(_DOC_HTML_ALL),install-doc-html) \
+ $(if $(_DOC_C_FIGURES),install-doc-figs) \
+ $(if $(_DOC_OMF_IN),install-doc-omf)
+# $(if $(_DOC_DSK_IN),install-doc-dsk)
+
+install-doc-docs:
+ @for lc in C $(_DOC_REAL_LINGUAS); do \
+ echo "$(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc"; \
+ $(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc; \
+ done
+ @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \
+ if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \
+ docdir="$$lc/"`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \
+ docdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$docdir"; \
+ if ! test -d "$$docdir"; then \
+ echo "$(mkinstalldirs) $$docdir"; \
+ $(mkinstalldirs) "$$docdir"; \
+ fi; \
+ echo "$(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \
+ $(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc; \
+ done
+
+install-doc-figs:
+ @list='$(patsubst C/%,%,$(_DOC_C_FIGURES))'; for fig in $$list; do \
+ for lc in C $(_DOC_REAL_LINGUAS); do \
+ figsymlink=false; \
+ if test -f "$$lc/$$fig"; then \
+ figfile="$$lc/$$fig"; \
+ elif test -f "$(srcdir)/$$lc/$$fig"; then \
+ figfile="$(srcdir)/$$lc/$$fig"; \
+ else \
+ figsymlink=true; \
+ fi; \
+ figdir="$$lc/"`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \
+ figdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$figdir"; \
+ if ! test -d "$$figdir"; then \
+ echo "$(mkinstalldirs) $$figdir"; \
+ $(mkinstalldirs) "$$figdir"; \
+ fi; \
+ figbase=`echo $$fig | sed -e 's/^.*\///'`; \
+ if $$figsymlink; then \
+ echo "cd $$figdir && $(LN_S) -f ../../C/$$fig $$figbase"; \
+ ( cd "$$figdir" && $(LN_S) -f "../../C/$$fig" "$$figbase" ); \
+ else \
+ echo "$(INSTALL_DATA) $$figfile $$figdir$$figbase"; \
+ $(INSTALL_DATA) "$$figfile" "$$figdir$$figbase"; \
+ fi; \
+ done; \
+ done
+
+install-doc-html:
+ echo install-html
+
+install-doc-omf:
+ $(mkinstalldirs) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)
+ @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \
+ echo "$(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+ $(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf; \
+ done
+ @if test "x$(_ENABLE_SK)" = "xtrue"; then \
+ echo "scrollkeeper-update -p $(DESTDIR)$(_sklocalstatedir) -o $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \
+ scrollkeeper-update -p "$(DESTDIR)$(_sklocalstatedir)" -o "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \
+ fi;
+
+install-doc-dsk:
+ echo install-dsk
+
+################################################################################
+
+.PHONY: uninstall-doc-docs uninstall-doc-html uninstall-doc-figs uninstall-doc-omf uninstall-doc-dsk
+uninstall-local: \
+ $(if $(DOC_MODULE)$(DOC_ID),uninstall-doc-docs) \
+ $(if $(_DOC_HTML_ALL),uninstall-doc-html) \
+ $(if $(_DOC_C_FIGURES),uninstall-doc-figs) \
+ $(if $(_DOC_OMF_IN),uninstall-doc-omf)
+# $(if $(_DOC_DSK_IN),uninstall-doc-dsk)
+
+uninstall-doc-docs:
+ @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \
+ echo " rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \
+ rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \
+ done
+
+uninstall-doc-figs:
+ @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; for fig in $$list; do \
+ echo "rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \
+ rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \
+ done;
+
+uninstall-doc-omf:
+ @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \
+ if test "x$(_ENABLE_SK)" = "xtrue"; then \
+ echo "scrollkeeper-uninstall -p $(_sklocalstatedir) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+ scrollkeeper-uninstall -p "$(_sklocalstatedir)" "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+ fi; \
+ echo "rm -f $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+ rm -f "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \
+ done
+
+dist-hook: doc-dist-hook
+
+-include $(top_srcdir)/git.mk
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
annotations-delete.page \
annotations-navigate.page \
annotations.page \
+ annotations-save.page \
+ annotations-view.page \
bookmarks.page \
commandline.page \
convertpdf.page \
convertPostScript.page \
convertSVG.page \
+ duplex-3pages.page \
+ duplex-4pages.page \
+ duplex-5pages.page \
+ duplex-6pages.page \
+ duplex-7pages.page \
+ duplex-8pages.page \
+ duplex-9pages.page \
+ duplex-10pages.page \
+ duplex-11pages.page \
+ duplex-12pages.page \
+ duplex-13pages.page \
+ duplex-14pages.page \
+ duplex-15pages.page \
+ duplex-16pages.page \
+ duplex-npages.page \
editing.page \
finding.page \
formats.page \
forms.page \
+ forms-saving.page \
index.page \
introduction.page \
invert-colors.page \
presentations.page \
print-2sided.page \
print-differentsize.page \
+ print-booklet.page \
printing.page \
print-order.page \
print-select.page \
reload.page \
shortcuts.page \
- textselection.page \
- tips.page \
- zooming.page
+ singlesided-3-4pages.page \
+ singlesided-5-8pages.page \
+ singlesided-9-12pages.page \
+ singlesided-13-16pages.page \
+ singlesided-17-20pages.page \
+ singlesided-Npages.page \
+ synctex.page \
+ synctex-beamer.page \
+ synctex-compile.page \
+ synctex-editors.page \
+ synctex-search.page \
+ synctex-support.page \
+ textselection.page
DOC_LINGUAS = bg ca cs de el en_GB es eu fi fr gl it ja nl oc pt_BR ru sl sr sv uk vi zh_CN
https://www.fi.muni.cz/~kas/git / evince.git / commitdiff